Modular Plug-In Connectors These connectors allow a maximum number of tube connections in a minimum of space. Parker Legris offers an ergonomic solution to enable quick connection for the most complex installations. Product Advantages Panel- Panel mounted to a machine or bulkhead Mounted Reduced risk of incorrect assembly Possible to connect in-line Plated metal joiners and clips for reinforcement In-Line Locating pin prevents incorrect assembly DIN Rail Used alongside electrical connectors Pressure indication Can be clipped side-by-side into a DIN rail profile [ or Ω Channels or slots for labels for tube identification Robotics Automotive Process Pneumatics Semi-Conductors Textile Packaging Cap guides the tubes and protects connections Aluminium and technical polymer components Bulkhead mountable Customised multi-connectors upon request Technical Characteristics Compatible Fluids Working Pressure Working Temperature Component Materials Compressed air Other fluids: please consult us Multi-connectors: • panel-mounted: zinc-plated steel, technical polymer • in-line: aluminium, technical polymer • DIN rail: technical polymer Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Use is guaranteed with a vacuum of 755 mm Hg (99% vacuum). Installation Configurations Panel-Mounted Offset assembly Standard assembly A box contains: 10 units 20 joining clips and 4 end pins 4 mounting brackets 4 coupling clips 1 dismantling tool Customised assembly The module is constructed from a number of symmetrical components connected by joining clips. A coupling clip locks the module closed. A dismantling tool allows disconnection. Maximum 5 modules recommended for the mating module; the fixed module is not limited. ISO 14743: Pneumatic fluid power, push-in connectors for thermoplastic tubes DI: 97/23/EC (PED) DI : 2002/95/EC (RoHS), 2011/65/EC DI : 1907/2006 (REACH)