Visual Index K4 BSP Adapters I

K4 BSP Adapters 4300 Catalog HMK4 FMK4 NPTF / 60° Cone F6MK4 H6MK4 Bulkhead Union 60° Swivel / 60° Cone Swivel Union I6 60° Cone BSP Adapters WMK4WL4NM Union I6 I6 I6 C6MK4 Straights F3MK4 G4MK4 EMK4 BSPT / 60° Cone BSPP / 60° Cone Union Elbow 60° Swivel / 60° Cone Elbows I7 I8 I8 E6MK4 I7 JMK4 S6MK4 R6MK4 J6MK4 Swivel Union Union Tee 60° Swivel Branch Tee 60° Swivel Run Tee Swivel Union Tee I9 I9 I9 I9 I7 Tees I8 PNMK4 FNMK4 Hex Head Plug Cap I7 I8 Plug Caps Conversion Adapters (Shown in Section K) XHMK46 XEMK46 37° Flare / BSPP Swivel 37° Flare / BSPP Swivel K5 K5 K4 BSP Conversion Adapters...

K4 BSP Adapters 4300 Catalog K4 BSP Adapters Parker K4 (BSP) adapters are typically used as hose adapters on equipment designed and/or manufactured throughout Europe, especially equipment with ties to the UK, Scandinavia, the Netherlands, Spain and Italy. BSP cone adapters are similar in function to NPSM (07 Adapters) but with BSPP threads. The metal-to-metal sealing is achieved by a single line of contact between the conical surface of the 60° cone seat and the corresponding surface of the ballnose or cone swivel, as shown in Fig. I1. Fig. I1 – K4 Interface K4 adapters are manufactured in accordance...

K4 BSP Adapters 4300 Catalog 60° Cone Adapters: JIS vs. K4 K4 Adapters, while very similar to JIS P4 cones (shown in previous section), are not interchangeable. Parker’s P4 JIS 60° cone adapters are manufactured in accordance to JIS B8363 while Parker’s K4 BSP adapters are manufactured in accordance to BS5200. The following are some pronounced differences that may help in distinguishing between the K4 and P4 fittings: 1. Thread length (“A” dimensions) 2. 60° angle diameter (“B” dimensions) 3. The undercut area (area between threads and hex body) on the straight K4 fittings incorporates a bonded...

K4 BSP Adapters 4300 Catalog Dimensions and pressures for reference only, subject to change. I10 Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio http://www.parker.com/tfd