Direct-to-Metal Adhesive/Sealant for Industrial Assembly LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals. Features & Benefits: • Durable - creates high strength bonds, replacing mechanical fastening methods; exhibits excellent primerless adhesive properties. • Convenient - requires no mixing; cures quickly even at low temperatures; requires no ovens or other heat sources for curing. Easy to dispense with manual applicator. Easy to tool and can be welded through wet or dry. • Chemically Resistant - solvent resistant when cured. Painting and most cleaning processes do not affect bond strength. • Temperature Resistant - uncured material can endure 225°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect. • Environmentally Resistant - provides excellent UV resistance and corrosion protection. Non-yellowing. Resists weathering and aging. • Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility. • Environmentally Recommended - low VOC; no solvent. • Increases Through-put - skins in 15-45 minutes; paintable immediately. Contact Information: Part # Description LORD 7610DTM WHT Cartridge Cartridge Size Parker Lord Engineered Materials Group 111 LORD Drive Cary, NC 27511-7923 USA Lord ENGINEERING YOUR SUCCESS.

Technical Data* *Data is typical and not to be used for specification purposes. Information and specifications subject to change without notice and without liability therefor. OD PB8137 04/24 Rev.3 Trademarks used herein are the property of their respective owners. Parker Lord ENGINEERING YOUR SUCCESS.