*mydirectindustry

Quick Coupling Products

Product catalog summary

Overview: This document is a comprehensive catalog from Parker Hannifin Corporation, detailing their range of quick coupling products, including swivels, valves, diagnostic sensors, and equipment. It emphasizes the importance of proper selection and use to prevent injury or damage.

Key Sections:

Pneumatic Quick Couplings: Introduces various series of couplings, including Industrial Interchange Nipples, Tru-Flate Design, and Universal Couplers. Each series is detailed with specific models and their applications.
Hydraulic Quick Couplings: Covers general-purpose, non-spill, connect under pressure, high pressure, and high flow couplings. Each type is broken down into series with specific couplers and nipples.
Thermoplastic Quick Couplings: Provides a selection guide and details on the Spectrum and PF Series, including ordering information.
Swivels: Describes the PS and S Series, including introduction, seal options, and ordering information.
Valves: Includes check valves, pressure/vacuum relief valves, and thermal bypass valves, with selection guides and ordering information.
Diagnostics: Introduces diagnostic tools like the SensoControl Meter and Parker ServiceJunior™, with selection guides and kit details.

Critical Information: The catalog stresses the user's responsibility in selecting and testing products to ensure they meet all performance and safety requirements. It also outlines the terms of sale and liability.

Specifications: The document outlines specifications for different series of couplers and nipples, including body sizes (1/4", 3/8", 1/2", 3/4"), rated pressure (300 psi), and temperature range (-40º to +250º F). It also details the locking devices used, such as balls and pawls, and provides vacuum data for connected and disconnected states.

Materials and Features: The document lists part numbers for brass, steel, and stainless steel components, along with optional materials and features like Sleeve-Lok, stainless steel springs, and various seal materials (Nitrile, Ethylene Propylene, Fluorocarbon).

Applications: The couplings are suitable for use with air compressors, pneumatic tools, water, grease, and paint. They are designed to mate with Industrial Interchange nipples, adhering to global standards like A-A-59439 and MIL-C-4109F.

Performance Data: Performance graphs illustrate air flow in SCFM against pressure drop in PSID for different inlet pressures (100 PSI and 80 PSI) across various body sizes.

Warnings: The document includes a Prop 65 warning about exposure to chemicals like Lead, which is known to cause cancer and reproductive harm.

Repair Kits: Information on repair kits is provided, listing part numbers for different seal materials and body sizes.

Ordering Information: The document explains how to order HF Series Couplers, detailing port configurations and body sizes.

Seal Options: The document lists seal materials such as Nitrile, Fluorocarbon, and Ethylene Propylene, each with specific temperature ranges. These seals are critical for ensuring compatibility with different fluids and operating conditions.

HF Series Couplers: These couplers are designed for industrial interchange nipples and feature a push-to-connect sleeve with a single shut-off mechanism. They are available in various body sizes and thread configurations, both male and female, with options for brass and steel construction.

10 Series Couplers: Known for the Tru-Flate design, these couplers are available in 1/4", 3/8", and 1/2" sizes. They feature a manual sleeve and single shut-off, with options for brass bodies and stainless steel components for enhanced corrosion resistance. The series is suitable for applications like air compressors and pneumatic tools.

Performance and Specifications: The document includes performance charts showing air flow and pressure drop for different inlet pressures. The rated pressure for these couplers is 300 psi, with a standard temperature range of -40º to +250º F.

Optional Features: Various optional features are available, such as Sleeve-Lok, Grip-Ring sleeves, and different seal materials. These options allow customization based on specific application needs.

Warnings: The document includes a warning about exposure to chemicals like Lead, which is known to cause cancer and reproductive harm, in compliance with California's Proposition 65.

Twist-Lock Series: Designed for general-purpose pneumatic applications with a push-to-connect sleeve and single shut-off mechanism. Available in 1/4" and 1/2" body sizes with a rated pressure of 300 psi and a temperature range of -40º to +250º F. Features include resistance to accidental disconnection and high airflow with minimal pressure drop. Applications include air compressors, pneumatic tools, water, grease, and paint.

IH Series: Features a cylindrical valve designed for pneumatic use, providing a durable single shut-off connection. Available in sizes from 1/4” to 3/4” with a steel body and standard nitrile seal. Includes an optional sleeve lock to prevent accidental disconnection. Applications include industrial air lines and pneumatic tools.

Tool-Mate Series: Lightweight, non-marring couplers available in standard and exhaust styles. Standard series features push-to-connect operation with a non-venting design, while the exhaust series allows disconnection at zero pressure to avoid hose whip. Constructed of polyamide material with galvanized steel port ends, suitable for pneumatic tools and drop-down air lines.

E-z-mate Series: Exhaust type quick couplers designed to safely relieve air pressure prior to disconnection. Features a self-locking valve sleeve to prevent accidental disconnection and meets ISO 4414 requirements for controlled pressure release. Applications include pneumatic tools and drop-down air lines.

Warnings: The document includes a warning about exposure to chemicals, including lead, which is known to cause cancer and reproductive harm, as per California's Proposition 65.

Specifications:

E-z-mate Series: Available in sizes 1/4" to 3/4", with a rated pressure of 300 psi and a temperature range of -40º to +250º F. The locking device varies from 4 to 8 balls depending on the size.
GF Series: Designed for natural and propane gas, with a maximum pressure rating of 60 psi and a temperature range of 32°F to 200°F. Certified to ANSI and CSA standards.

Performance Data:

Graphs illustrate air flow in SCFM against pressure drop in PSID for different inlet pressures (100 PSI and 80 PSI) for various sizes of E-z-mate couplings.

Procedures:

To connect, rotate the valve sleeve clockwise to open flow and engage the sleeve-lock mechanism. To disconnect, rotate counterclockwise to shut off air flow and vent downstream air.

Safety and Maintenance:

Regular lubrication of the sleeve is recommended as part of periodic maintenance.
Warning about exposure to chemicals, including lead, which may cause cancer and reproductive harm.

Applications:

GF Series couplings are suitable for small gas appliances and incorporate a safety fuse to shut off gas supply if temperatures exceed 350°F.

Hydraulic Couplings:

Includes Double Shut-Off and Straight-Thru couplings, with rated pressures ranging from 30 to 15,000 psi.
Checklist for selecting quick couplings includes considerations for pressure, temperature, and fluid compatibility.

EA Series Specifications:

Designed for vacuum and medium pressure service, suitable for applications like aircraft fabrication and plastic molding.
Available in steel, 316 stainless steel, and brass with standard nitrile seals.
Pressure ratings: Maximum working pressure of 3000 psi for 1/4" to 1/2" sizes, and 2000 psi for 3/4" size.
Vacuum capability at standard barometric conditions is consistent across all sizes.

SM Series Specifications:

High-pressure manual sleeve, poppet valve couplings for general-purpose hydraulic applications.
Rated pressures up to 6000 psi for 1/4" and 1/2" sizes, and 4500 psi for 3/4" size.
Standard end configurations include female pipe, straight thread ORB, and British pipe.

HP Series Specifications:

Designed for high-pressure applications up to 5000 psi, available in 1" and 1-1/2" sizes.
Features a smooth flow path with minimal pressure drop and heat-treated steel components for durability.
Standard end configurations include female pipe and straight thread ORB.

Warnings: The document includes a Prop 65 warning indicating that the products may expose users to chemicals like Lead and DEHP, known to cause cancer and reproductive harm.

Additional Information: The document also provides details on repair kits, optional seal materials, and dust caps and plugs for the couplings. Users are advised to consult the Fluid Compatibility Chart or contact QCD for selecting proper seal materials.

HP Series: High-pressure manual sleeve, poppet valve couplings with optional seal materials like fluorocarbon and neoprene. Available in different body sizes with specific thread sizes, lengths, and weights.

4000 Series: Designed for rugged applications with manual sleeve and poppet/ball valve options. Rated for up to 3000 psi and temperatures from -40°F to +250°F. Features include hardened critical parts and protective zinc plating.

4200 Series: Similar to the 4000 Series but includes a breakaway feature. Compatible with ISO 5675 universal tips and offers push-to-connect operation. Rated for up to 3000 psi.

NS Series: Non-spill couplings designed to minimize spillage and air inclusion. Rated pressure up to 2500 psi with a sleeve lock to prevent accidental disconnection.

Performance:

Flow vs. pressure drop graphs are provided for different series, indicating performance under various conditions.
NS Series offers high flow rates with minimal pressure drop, suitable for high-tech industry cooling applications.

Materials and Options:

Seal materials include nitrile, ethylene propylene, and fluorocarbon, with specific suffix codes for each material.
Dust caps and plugs are available in various materials and colors for protection.

Warnings: Products may expose users to chemicals like lead, known to cause cancer and reproductive harm, as per California's Proposition 65.

NSS Series and FF/FC Series: These couplings are designed for high flow, non-spill applications in various industrial settings.

Features:

Non-spill valving minimizes fluid loss and air inclusion.
Constructed from corrosion-resistant stainless steel.
Easy push-to-connect operation with guided alignment.
High flow capacity and compact size.
Available in various end configurations including female straight thread, Push-Lok hose barb, A-Lok, bulkhead, and panel mount options.
Alternative seal materials are available.

Applications:

Cooling lines
Chemical transfer lines
High purity systems
Lab equipment

Specifications:

Body sizes available: 3/8" and 1/2".
Rated pressure: 2000 psi for 3/8" and 300 psi for 1/2".
Rated flow: 10 gpm for 3/8" and 12 gpm for 1/2".
Temperature range: -70° to +250°F with standard seals.
Materials: 316 stainless steel for body, sleeve, and valve; 17-7 stainless steel for spring; 303 stainless steel for locking ball.
Spillage and air inclusion are minimal per disconnect.

Performance:

Pressure drop vs. flow data is provided for different series and sizes.
Adapters are available for compatibility with various coupling types.

Warnings:

Products may expose users to chemicals like Lead, known to cause cancer and reproductive harm.

Ordering Information:

Part numbers and configurations are detailed for couplers and nipples, including options for different seal materials.

Conclusion: Parker Hannifin's NSS and FF/FC Series couplings offer robust, high-performance solutions for hydraulic applications, with a focus on minimizing spillage and ensuring compatibility across various systems.

FEM Series Specifications:

Body sizes range from 1/4" to 1" with rated pressures up to 4568 psi and flow rates up to 50 gpm.
Temperature range: -22º to +212ºF.
Materials: Steel body with zinc finish, polyurethane and nitrile seals.
Features include flush, non-spill valving, global interchangeability, and connect-under-pressure options.

FEC Series Specifications:

Designed for connect-under-pressure applications with up to 3000 psi trapped pressure.
Body sizes from 1/2" to 3/4" with flow rates up to 26 gpm.
Features include hardened locking surfaces and anti-blowout bonded nipple seals.

FH Series Specifications:

High-pressure couplings rated up to 10,000 psi, available in 3/8" size.
Features include push-to-connect operation and a red finish for easy identification.

FS Series Specifications:

Stainless steel construction for chemical compatibility, suitable for closed system transfers.
Body sizes from 1/4" to 1" with rated pressures up to 2000 psi.
Features include flush, non-spill valves and a wide range of seal material options.

Applications: These couplings are used in various applications including hydraulic tools, skid loader attachments, chemical dispensing systems, and high-pressure test equipment.

Warnings: The document includes warnings about exposure to chemicals like Lead, which are known to cause cancer and reproductive harm.

FS Series: The FS Series features stainless steel construction with flush face valves for chemical compatibility. Repair kits are available for both coupler and nipple halves, including replacement seals and valve assemblies. The series supports various seal materials, including fluorocarbon and ethylene propylene.

59 Series: Designed for high-pressure applications, the 59 Series couplings can connect and disconnect under pressure. They feature a robust ACME thread for quick connections and are made from high-strength materials with zinc nickel coating for durability. The series supports operating pressures up to 6000 psi and is suitable for mobile drill rigs, oil field equipment, and more.

FET Series: The FET Series is built for high-pressure, high-impulse applications, allowing connections under residual pressure. It features high-strength materials and FNC coating for corrosion resistance. Applications include mobile drill rigs and excavator attachments. The series supports pressures up to 6000 psi.

6100 Series: This series offers threaded connections with flush valves for high flow and low spill. It is suitable for submersible pumps, oil field equipment, and bulk liquid transfer. The series supports pressures up to 3000 psi and features a visual connection indicator.

Key Features and Applications: Each series is designed for specific industrial applications, offering features like high impulse resistance, visual connection indicators, and compatibility with various seal materials. The document also includes warnings about potential exposure to chemicals like lead.

Specifications and Features:

6100 Series: Features threaded connections with flush valves for high flow. Available in sizes ranging from 3/4" to 1 1/2". Includes dust caps for nipples and couplers with wingnut and hex nut options.
8200 Series: Allows connection under pressure with a unique valve design. Features include ISO 5675 compatibility, one-handed push-to-connect operation, and protective zinc plating. Suitable for tractors and mid-sized agricultural equipment.
9200 Series: Lever actuated couplings that allow zero pressure connection and disconnection. Features include locked valves to prevent flow checking and compatibility with ISO 5675 nipples. Not recommended for gaseous media.
5000 Series: Economical couplings with threaded actuation for connection under pressure. Suitable for lubrication systems and hydraulic tools. Features manual, threaded actuation and protective zinc plating.
75 Series: Designed for high-pressure hydraulic service, particularly in oil fields and offshore drilling. Features include thread-to-connect design, up to 5,000 psi rated pressures, and "Fire Safe" rated options.

Performance and Applications:

Each series is tested with oil at 200 SUS, with performance graphs indicating flow rates and pressure drops.
Applications vary from agricultural attachments to industrial hydraulics and mobile equipment.

Warnings: The document includes a warning about exposure to chemicals, including lead, which is known to cause cancer and reproductive harm, as per California's Proposition 65.

Additional Information: The document provides part numbers, optional seal materials, and replacement parts for each series. It also includes contact information for Parker Hannifin Corporation's Quick Coupling Division for further inquiries.

Specifications: The 75 Series includes threaded connection poppet valves suitable for connecting under pressure. They are available in steel and 316 stainless steel, with sizes ranging from 3/4" to 4". The 71 Series is designed for non-spill, push-to-connect applications, supporting pressures up to 10,000 psi. It features flush face valves to minimize air inclusion and fluid loss.

Pressure and Flow Rate: The document includes detailed charts showing pressure loss in psi and bar for different flow rates in gallons per minute (gpm) and liters per minute (lpm). The 71 Series supports a maximum working pressure of 10,000 psi for steel and high-pressure stainless steel, with varying burst pressures depending on the material.

Components and Options: Each coupling kit contains a valve assembly, spring, and guide stop. Options include different seal materials (Nitrile, Fluorocarbon, Ethylene Propylene Rubber) and additional features like wrench flats and sleeve locks. The document also provides part numbers for dust caps, plugs, and repair kits.

Applications: These couplings are suitable for industrial hydraulic lines and off-shore drilling, offering superior flow with low pressure drop. The 71 Series is particularly noted for its heavy-duty construction and sleeve lock option to prevent accidental disconnection.

Warnings: The document includes a Prop 65 warning about exposure to chemicals like lead, which are known to cause cancer and reproductive harm.

3000 Series: This series features manual threaded connections with chrome alloy ball valves and polyurethane seals. They are suitable for hydraulic rams and portable hydraulic tools. The series includes nipples and couplers with different body sizes and configurations, all designed to withstand high pressure.

TC Series: Designed for high-pressure applications up to 10,000 psi, the TC Series includes manual sleeve operation and fluorocarbon seals. It is ideal for hydraulic jacking and construction equipment, featuring a sleeve lock to prevent accidental disconnection.

1141 Series: These couplings connect under pressure and are made of stainless steel with polyurethane seals. They are suitable for corrosive environments and offshore equipment, with a rated pressure of up to 10,000 psi.

ST Series: Non-valved couplings that provide maximum flow and low pressure drop. They are available in various materials and are used in high-pressure water and steam applications.

HO Series: High flow, high-pressure couplings made of steel with electroless nickel plating. They are used in paper processing and refinery systems, with a rated pressure of up to 15,000 psi.

Safety Warning: The document includes a warning about exposure to chemicals like Lead, which can cause cancer and reproductive harm, as per California's Proposition 65.

Performance Guidelines: The document advises on the selection and use of non-valved and valved couplers, emphasizing the importance of matching couplers and nipples for optimal performance.

Moldmate Series: Designed for connecting coolant lines in injection molding and die casting equipment. They are available in sizes 1/4", 3/8", and 1/2" with a rated pressure of 200 psi.

DM Series: Miniature couplings with a 1/8" body size, rated for 250 psi, featuring double shut-off valving and fluorocarbon seals.

Materials and Temperature Range: Standard silicone seals are compatible with water and water glycol fluids, with a temperature range of -20°F to +400°F. Optional fluorocarbon seals are available for oil-based media, with a temperature range of -15°F to +400°F.

Features: Moldmate couplings offer quick connection and disconnection, reducing downtime during mold changes. Valved and non-valved options are available, with valved couplers featuring silver-colored sleeves. Brass body construction with silicone seals, and optional fluorocarbon seals for oil-based media.

Applications: Mold coolant lines and die casting equipment for Moldmate Series. Dental equipment, lubrication lines, fluid transfer, and coolant lines for DM Series.

Performance and Flow Rates: Flow rates for Moldmate Series range from 3 to 12 gpm depending on the body size. DM Series has a rated flow of 0.8 gpm.

Warnings: The product contains chemicals, including lead, known to cause cancer and reproductive harm, as per California's Proposition 65.

Ordering Information: Fluorocarbon seals can be specified by adding the suffix “Y” to the part number. Push-Lok hose barbs are available and do not require clamps.

Specifications: Parker Hannifin Corporation provides a range of quick coupling products, including hydraulic and thermoplastic couplings. The document details various series and their specifications, such as body size, material, locking mechanism, standard seal material, temperature range, and rated pressure. For example, the PF Series is designed for non-spill bulk transfer with a push-to-connect mechanism and is available in polypropylene/stainless steel materials.

Procedures: When ordering Parker coupler bodies and nipples, it is important to state the part number of each type separately. The document advises double-checking thread or hose sizes and provides guidance on selecting non-standard options for specific applications.

Standards and Recommendations: The document includes a warning about exposure to chemicals like Lead, which is known to cause cancer and reproductive harm. It recommends consulting the Fluid Compatibility Chart for selecting appropriate materials for various media and contacting the Quick Coupling Division for specific application needs.

Optional Features and Seals: Optional features include heavy-duty nipples, coupler sleeve locks, poppet valves, push-lok hose barbs, and valve actuators. The document provides a chart for optional seals suffixes, indicating the availability of different seal materials like ethylene propylene, fluorocarbon, neoprene, and perfluoroelastomer for various coupling series.

Thermoplastic Couplings: The Spectrum Series offers advanced engineered thermoplastic couplings with features like excellent chemical compatibility, high flow capacity, and easy push-to-connect operation. The series is suitable for applications in chemical processing, automation equipment, and food processing.

Performance and Applications: The PF Series is highlighted for its ability to eliminate fluid loss upon disconnection, making it ideal for chemical dispensing systems and bulk transfer barrels. The document provides performance specifications, including rated pressure, flow, and temperature ranges for different body sizes.

Ordering Information: The document provides detailed ordering information for various couplers and nipples, specifying part numbers, port sizes, overall lengths, and other dimensions. It also includes information on optional dust caps and plugs for couplers and nipples.

Introduction
The document provides detailed specifications and ordering information for Parker Hannifin's Quick Coupling Division products, specifically focusing on the PS Series Swivels. These swivels are designed to meet modern application needs with pressure capabilities up to 5000 psi and a variety of port options.

Specifications
The PS Series Swivels are available in body sizes ranging from 1/4” to 2” and feature hardened bearing races for extended service life, a full flow design to minimize pressure drop, and a sealed bearing design to isolate the bearing race from media and environment. The swivels are available with Chromium-6 Free or nickel plating for corrosion resistance and come with a variety of seal options.

Seal Options
Standard seals are made of Nitrile, with options for Aflas™, Ethylene Propylene, Fluorocarbon, and Neoprene. For Perfluoroelastomer seal options, contact the division.

Ordering Information
When ordering, specify the part number for each type of coupler body and nipple desired. The document provides a detailed guide on how to order, including housing port configurations, material and finish options, and seal codes.

Performance Data
Charts included in the document illustrate torque vs. pressure, oil flow vs. pressure drop, and recommended maximum speed vs. pressure for various swivel sizes.

Repair Kits
Repair kits for the PS Series Swivels include O-Rings, PTFE Back-Up Ring, Cap Screws, Locking Balls, Retaining Ring, and grease fitting. These kits are suitable for both current and previous design in-line and 90º PS Series Swivels.

Materials of Construction
The document lists materials used in the construction of the swivels, including carbon steel for housing and shaft, chrome for bearings, and PTFE for back-up rings.

Warnings
The document includes a warning about exposure to chemicals, including lead, which is known to cause cancer and birth defects according to California's Proposition 65.

Product Specifications: The document lists multiple part numbers with corresponding dimensions such as length (A), width (B), and diameter (C, D). It specifies the types of threads used for ports, including UNF, NPTF, and NPSM, and provides wrench flat sizes for each part.

Swivel Types: The document categorizes swivels into different configurations such as Male SAE O-Ring Straight Thread, Female SAE Straight Thread, and combinations with 37° Flare and Pipe Swivel. Each category includes specific part numbers and their respective dimensions.

Warnings: A significant warning is included about the exposure to chemicals like Lead, which is known to cause cancer and reproductive harm, as per California's Proposition 65.

S Series Swivels: The S Series is highlighted for its pressure-balanced design, compact forged body, and 3000 psi working pressure rating. It features dust seals, field service kits, and a 360° swivel capability to reduce hose stress.

Performance Data: The document includes a performance chart showing pressure drop versus flow rate for different body sizes (1/4" to 1").

Repair Kits: Information on repair kits for different seal types (Nitrile, EP, Fluorocarbon) is provided, including part numbers for various sizes.

Ordering Information: Instructions on how to order, including port configurations, material and finish options, and seal codes, are detailed.

Conclusion: The document serves as a comprehensive guide for selecting and ordering swivel products, emphasizing durability, performance, and safety considerations.

Introduction
Parker Hannifin Corporation's Quick Coupling Division provides a comprehensive range of check valves designed for various applications. These valves are engineered to ensure reliable operation and are available in multiple series, each with specific features and specifications.

Check Valves - Technical Information
Check valves are crucial in hydraulic circuits to prevent backflow and protect pumps. They are not field repairable or adjustable, with crack pressure settings made at the factory. The crack pressure is the fluid pressure required to move the poppet off the seat, typically set at 5 PSI but adjustable for specific needs.

Selection Guide
The selection guide provides details on various series, including body size, material type, rated pressure, and crack pressure range. For example, the CV Series ranges from 1/4" to 1" in steel with a metal-to-metal seal, rated at 3000 PSI with a crack pressure range of 5-130 PSI.

DT Series Check Valves
The DT Series features a compact design with a maximum operating pressure of 2500-5000 PSI. It offers various fitting styles and optional crack pressures from 1 to 200 PSI. The series is designed for easy installation in tight circuits and includes features like all-steel construction and a smooth flow stream.

CV Series Check Valves
The CV Series is designed for low pressure drop and high flow, with a modular design that complements the DT Series. It is available in sizes from 1/4" to 1", with a pressure rating of up to 3000 PSI and flow capacities up to 100 GPM. Standard crack pressures are 5 and 65 PSI.

Ordering Information
Ordering codes are provided for each series, detailing the series, size, fitting style, and crack pressure. Custom crack pressures are available upon request.

Warnings
The document includes a warning about exposure to chemicals, including lead, which is known to cause cancer and reproductive harm, in compliance with California's Proposition 65.

1. CV Series Check Valves:

Available in sizes ranging from 1/4" to 1".
Test fluid used is oil with a viscosity of 200 SUS.
Different fitting styles include Male Flare and Male O-Ring Boss.
Crack pressures range from 5 PSI to 200 PSI in 5 PSI increments.

2. DC Series Check Valves:

Rugged, cost-competitive in-line valves available in sizes from 1/4" to 2".
Pressure rating up to 3000 psi and flow capacities up to 300 GPM.
Features include all-steel construction, one-piece body, and heat-treated poppet.

3. CPIFF Series Check Valves:

Soft seat check valves designed to prevent reverse flow.
Available in sizes from 1/4" to 1" with a pressure rating up to 5000 psi.
Standard fluorocarbon poppet seal with optional crack pressures.

4. C Series Check Valves:

Soft seat check valves available in sizes from 1/4" to 2".
Stainless steel construction with a rated pressure of 6000 psi for smaller sizes and 3000 psi for larger sizes.
Fluorocarbon poppet seal is standard.

5. 2600 Series Swing Check Valves:

Lightweight aluminum construction with a spring-loaded, trapdoor style valve.
Designed for low-pressure applications with a maximum crack pressure of 1/2 psi.
Used in diesel and gasoline engine fuel lines, oil filters, and coolers.

6. H1 and HM1 Series Pressure/Vacuum Relief Valves:

Maintain positive pressure in hydraulic reservoirs with a compact size and reusable bronze filter.
Pressure relief settings range from 5 psi to 50 psi.
HM1 series includes a manual pressure relief button.

7. PV Series Pressure/Vacuum Relief Valves:

Economical design with a large filter area for use in contaminated environments.
Pressure relief settings from 5 PSI to 30 PSI.
Optional bayonet style allows mounting in filler port, serving as a filler cap.

Warnings: Some products contain chemicals known to cause cancer and reproductive harm, as per California's Proposition 65.

Specifications and Ordering Information:
The document provides detailed specifications for various Parker Hannifin products, including PV Series fittings and Thermal Bypass Valves. The PV Series includes options for bayonet style, male pipe threads, and male O-ring Boss with SAE threads. Crack pressure options range from 5 to 30 PSI. The Thermal Bypass Valves are designed to maintain optimum fluid temperature with features like lightweight aluminum housing, integral relief valve, and a maximum operating pressure of 250 PSI.

Flow Data and Performance:
Flow data for the PV Pressure-Vacuum Relief Valve and Thermal Bypass Valves are provided, illustrating pressure drop against flow rates. The Thermal Bypass Valves can handle up to 60 GPM flow rates and have a proof pressure of 300 PSI.

Diagnostic Products:
Parker's SensoControl product line offers diagnostic tools for hydraulic and pneumatic systems. The ServiceJunior digital pressure gauge provides accurate pressure measurements with features like a backlit display, user-adjustable pressure units, and a scanning rate of 10ms. The ServiceJunior CONNECT offers wireless operation and digital pressure monitoring, enhancing safety and accuracy.

Product Selection and Accessories:
The document includes a selection guide for diagnostic meters and test port couplings, detailing various models and their capabilities. Accessories such as diagnostic couplers, hose extensions, and storage cases are also listed, with part numbers and descriptions provided for easy ordering.

Specifications:

ServiceJunior™ Digital Pressure Gauge: Offers wireless remote readings, easy operation, and a backlit display. It supports a range of pressures from -14.5 to 8700 psi and has a battery life dependent on the wireless transmission rate.
Serviceman Plus™ Diagnostic Meter: A robust, portable device capable of measuring pressure, flow, temperature, and RPM. It features automatic sensor recognition, a large back-lit display, and a scan rate of 1 ms. Available in analog and CAN versions.
Service Master Easy™ Diagnostic Meter: Allows simultaneous measurement and storage of operational parameters. It features four sensor inputs, intuitive operation, and a rugged design.

Procedures and Usage:

To receive products with calibration certificates, add 'K-' to the beginning of the part number.
Battery life and charging times are specified for different models, with the Serviceman Plus offering over 8 hours of operation with two sensors.

Accessories and Kits:

Various kits are available for both PD and EMA styles, including gauges, fittings, hoses, and storage cases.
Diagnostic meters come with transducers, cables, power supplies, and software for data analysis.

Technical Data:

Detailed technical specifications are provided for each product, including memory capacity, interface options, and environmental operating conditions.
Products are designed to withstand specific environmental conditions and are rated for protection against dust and water ingress.

Recommendations:

Ensure proper selection of kits and accessories based on the required pressure and flow ranges.
Utilize the SensoWin software for comprehensive data analysis and documentation.

Specifications:

Service Master Plus: A handheld diagnostic instrument with capabilities to measure pressure, flow, rotational speed, temperature, and auxiliary inputs. It features 26 sensor inputs, rugged design, auto sensor recognition, and a full-color data display. It supports data storage on the device, micro SD, or USB, and includes SensoWin software for data analysis.
Transducers: Available in both analog and CAN bus technology, with pressure ranges from vacuum to 14,500 psi. They are color-coded for easy identification and constructed with corrosion-resistant stainless steel housing. The accuracy is 0.50% max full scale.
Flow Sensors: Designed to measure pressure, temperature, and flow from a single test point. Constructed of lightweight aluminum, they are compatible with various hydraulic fluids and minimize the effect of viscosity changes.

Ordering Information:

Products can be ordered with specific codes indicating style (PD, PDP, EMA), pressure range, and coupling style. Calibration certification can be added by prefixing the part number with 'K-'.
Additional transducers and sensors are available for high-pressure applications, with options for both analog and CAN bus technology.

Key Features:

Measurement accuracy of ±0.25% FS with a temperature error of 0.02% FS per °C.
Environmental resilience with operating temperatures from 32 to 112°F and storage temperatures from -10 to 140°F.
Interfaces include USB, Ethernet, and analog inputs, with protection ratings of IP64 and IP54.

Applications: These diagnostic tools are suitable for use in various industrial applications, including pneumatic, hydraulic, valves, thermoplastics, and diagnostics, providing comprehensive analysis and monitoring capabilities.

Flow Sensors: Parker offers both analog and CAN flow sensors with PD, PDP, or EMA style diagnostic ports. These sensors are compatible with Parker's Serviceman Plus, Service Master Plus, and Service Master Easy devices. The sensors are constructed from anodized aluminum and stainless steel, ensuring durability and compatibility with petroleum-based fluids. They offer a flow measurement accuracy of ±1.0% and are available in four measurement ranges from 0.2 to 160 gpm.

Technical Specifications: The analog flow sensors operate within a fluid temperature range of -4°F to +194°F and an ambient temperature range of -4°F to +122°F. They require a voltage input of +7 to 12 VDC and have a response time of 50 ms. The CAN flow sensors have a slightly different ambient temperature range of 14°F to +122°F and a voltage input range of 8 to 40 VDC.

Diagnostic Products: The document also details various diagnostic products, including SensoControl hand-held diagnostic meters, which are equipped with analog and/or CAN connector ports. These meters are compatible with a range of accessories such as pressure sensors, temperature sensors, and flow meters. The SensoWIN software facilitates data transfer from Parker handmeters to a PC.

Couplings: Parker's PD and PDP series couplings are designed for easy connection to mechanical gauges or diagnostic equipment. These couplings can withstand pressures up to 6000 PSI and are available in various configurations, including male and female pipe threads, bulkhead, and straight thread options. The document emphasizes the importance of using protective dust caps to extend the life of the couplings.

Options and Accessories: Calibration certification documents can be included with the flow sensors by adding a 'K-' prefix to the part number. Various adapters, cables, and software options are available to enhance the functionality of the diagnostic products.

Fluid Compatibility Chart Overview

This document from Parker Hannifin Corporation's Quick Coupling Division provides a comprehensive fluid compatibility chart. It evaluates the compatibility of various media with different body and seal materials used in quick couplings. The chart is essential for selecting appropriate materials for specific fluid applications to ensure safety and performance.

Main Sections:

Body and Seal Materials: The chart lists materials such as Brass, Steel, 316 Stainless Steel, 303 Stainless Steel, Nitrile, E.P., Fluorocarbon, and Neoprene.
Media Compatibility Ratings: Each media is rated for compatibility with the materials using a numerical code: 1 (Satisfactory), 2 (Fair), 3 (Not Recommended), and 4 (Insufficient Data Available).
Appendices: Additional information and ratings for specific chemicals and conditions, including a separate rating system using codes G (Good), L (Marginal), P (Poor), and — (Not Tested).

Key Findings:

Many common fluids like water, ethanol, and glycerine show satisfactory compatibility with most materials.
Certain aggressive chemicals, such as bromine and chlorine, are not recommended for use with most materials.
Specific materials like Fluorocarbon and Neoprene show varied compatibility depending on the media, highlighting the importance of careful selection based on application needs.

Recommendations:

Conduct further testing for marginally compatible materials to ensure long-term serviceability.
Use the chart as a preliminary guide and consult with material specialists for critical applications.

Introduction
This document provides guidelines for the selection, installation, and maintenance of quick action couplings by Parker Hannifin Corporation. It emphasizes the user's responsibility in ensuring the suitability and safety of the couplings for specific applications.

Selection Instructions

Pressure: Ensure the coupling's rated pressure meets or exceeds system pressure to avoid reduced lifespan.
Fluid Compatibility: Verify compatibility of materials with the fluid used, referencing Parker's fluid compatibility chart.
Temperature: Ensure temperatures do not exceed coupling limits; use protection when handling heated or cooled couplings.
Size: Select appropriate sizes to minimize pressure loss and avoid damage from heat or fluid velocity.
Pressurized Connect/Disconnect: Use couplings designed for pressurized operations.
Environment: Protect couplings from environmental factors like UV radiation and chemicals.
Locking Means: Consider sleeve lock designs to prevent accidental disconnection.
Mechanical Loads: Account for external forces like tensile loads and vibration.
Specifications and Standards: Follow relevant specifications and standards.
Vacuum: Ensure couplings are suitable for vacuum applications.
Fire Resistant Fluids: Some fluids require non-standard seals.
Radiant Heat: Protect couplings from heat sources that could cause damage or fire.
Welding and Brazing: Avoid heating parts above 450°F to prevent gas emission and seal damage.

Installation Instructions

Pre-Installation Inspection: Inspect couplings for correct specifications before installation.
Mixed Manufacturer Assemblies: Do not exceed the lowest pressure rating when using different manufacturers' parts.
Fitting Installation: Use compatible sealants and avoid excessive torque to prevent damage.
Caps and Plugs: Use them to protect uncoupled parts from contamination.
Coupling Location: Ensure accessibility without exposing operators to hazards.
Hose Whips: Use hose whips to reduce damage risk and isolate vibration.

Maintenance Instructions

Visual Inspection: Regularly inspect for damage, leaks, and dirt buildup.
Functional Test: Test systems at maximum pressure to check for malfunctions.
Replacement Intervals: Establish intervals based on service life and risk potential.

Offer of Sale

Definitions: Clarifies terms like Buyer, Goods, Products, and Seller.
Terms: Sales are governed by Parker's terms, and modifications require written agreement.
Price and Payment: Prices are valid for 30 days, and payment is due within 30 days of invoice.
Shipment and Delivery: Title and risk pass to Buyer upon shipment; Seller is not liable for delays.
Warranty: Goods are warranted for 12 months or 2,000 hours; services for 6 months; software for 90 days.
Claims: Claims must be made within specified timeframes.
Limitation of Liability: Seller's liability is limited to repair, replacement, or refund.
Loss to Buyer's Property: Seller is not responsible for loss or damage to Buyer's property after two years without orders.

Tooling and Security Interest: The document outlines that any special tooling used in manufacturing remains the property of the seller, even if the buyer pays for it. The seller retains the right to alter or dispose of the tooling. Additionally, the seller holds a security interest in all products delivered to the buyer to secure payment.

User Responsibility and Indemnity: The buyer is responsible for selecting products that meet all performance and safety requirements. If the buyer misuses the products or fails to comply with instructions, they must indemnify the seller against any resulting claims or damages.

Cancellations and Changes: Orders cannot be canceled or modified without the seller's consent. The seller may change product features or availability at any time.

Force Majeure: The seller is not liable for delays or failures due to events beyond their control, such as natural disasters or labor disputes.

Termination and Ownership: The seller can terminate agreements with notice or immediately if the buyer breaches terms. The seller retains ownership of any software provided, granting only a limited license to the buyer.

Intellectual Property Rights: The seller will defend against claims of intellectual property infringement related to the products, provided the buyer notifies the seller promptly and allows them to control the defense.

Governing Law and Entire Agreement: The terms are governed by Ohio law, and any disputes will be resolved in Ohio courts. These terms, along with any quote, form the entire agreement between the buyer and seller.

Compliance with Laws: The buyer must comply with all applicable laws and indemnify the seller against any violations.

Glossary and Company Overview: The document includes a glossary of terms related to quick disconnect couplings and an overview of Parker Hannifin Corporation's divisions and their functions.

Company Overview: Parker Hannifin Corporation is a Fortune 500 company listed on the New York Stock Exchange (PH). It manufactures over 1,400 product lines that control motion in approximately 1,000 industrial and aerospace markets. The company serves nearly 400,000 customers worldwide through 7,500 distributors.

Mission Statement: Parker aims to be a leading global manufacturer of components and systems for durable goods. The focus is on designing, marketing, and manufacturing products that control motion, flow, and pressure, achieving growth through premier customer service.

Product Information: North American customers can obtain product information, distributor locations, or repair services by calling the Parker Product Information Center at 1-800-C-PARKER. European customers can call 00800-C-PARKER-H.

Divisions and Groups:

Aerospace Group: Specializes in control systems and components for aerospace and high-technology markets.
Climate & Industrial Controls Group: Designs and markets system-control and fluid-handling components for refrigeration, air-conditioning, and industrial customers globally.

Product Offerings: Parker provides a comprehensive range of products including tube fittings, hose and hose fittings, brass and composite fittings, quick-disconnect couplings, valves, and assembly tools. These are available in various sizes and materials such as steel, stainless steel, brass, aluminum, nylon, and thermoplastic.

Global Presence: Parker operates manufacturing locations and sales offices across North America, South America, Europe, and Asia-Pacific.

Contact Information: The document lists contact details for various divisions and distribution service centers in North America, Canada, and Mexico, providing phone and fax numbers for each location.

Catalog excerpts

Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Sensors and Equipment Catalog 3800 USA | September 2019 ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Quick Coupling Division Locations FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. • This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. • The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and...

Open the catalog to page 2

Parker Hanniﬁn Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcoupli

Open the catalog to page 3

Parker Hanniﬁn Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcoupling

Open the catalog to page 4

Parker Hanniﬁn Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quick

Open the catalog to page 5

Parker Hanniﬁn Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcouplings

Open the catalog to page 6

Single Shut-Off Couplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air tools, hoses, or other implements to compressed air supplies. They are also used with other gases, and with the exception of the E-z-mate Series can be used with low pressure fluids. The coupler half contains a shut-off valve that is automatically opened when a mating nipple is inserted and automatically closes when the nipple is removed. Parker Single Shut-Off couplings come in three basic designs: general purpose/manual connect, general purpose/push-to-connect, and special purpose....

Open the catalog to page 7

Parker Hanniﬁn Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcoupli

Open the catalog to page 8

A WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov A-3 Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN

Open the catalog to page 9

Pneumatic Coupling Selection Guide - continuedPneumatic Coupling Selection Guide Body Sizes (in.) Connection style Locking Mechanism Special Purpose - Natural and Propane Gas Couplings Std Seal Temp Range Rated Pressure Coupler Series * Material Code: B = Brass, S = Steel, SS = Stainless Steel, P = Plastic ** Spectrum Series material options: • Acetal/316SS • PVDF/316SS (subject to quote from the division) • PVDF/PEEK™ (subject to quote from the division) A WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects...

Open the catalog to page 10

Pneumatic Quick Couplings General Purpose Interchange Match-up Chart Parker’s Quick Coupling Division manufactures quick couplings to interchange with popular designs that have become accepted standards in the industry today. The actual size nipple chart below can be used to help select Parker Quick Couplings that will interchange with specific nipple designs and sizes. 10 Series (Tru-Flate Automotive Interchange) 20 Series, 30 Series, HF Series, E-z-mate (Industrial Interchange) Popular Coupling Designs 70 Series (Lincoln Interchange) 1/4” Body Size 1/4” Body Size 1/2” Body Size 3/8” Body Size...

Open the catalog to page 11

Parker Industrial Interchange Nipples are compatible for use with 20 Series, 30 Series, HF Series, Universal or E-z-mate couplers. The standard male tip of the pneumatic industry, these nipples are interchangeable with similar nipples manufactured to the same requirements. Features: • Conforms to A-A-59439 (MIL-C-4109F, ISO 6150-B) requirements for global interchangeability • Steel nipples have hardened wear points and load-bearing areas • Unvalved style nipple mates with valved couplers Applications include: • Air compressors • Pneumatic tools • Drop-down air lines Optional Material: add code...

Open the catalog to page 12

Nipples - Male Pipe Thread A Pneumatics Nipples - Standard Hose Barb * This dimension represents the portion of the nipple that is exposed when the nipple is connected to a Parker 20 Series coupler. **Prop 65 Warning does not apply to stainless steel part numbers. A WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov A-7 Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcouplings

Open the catalog to page 13

A Pneumatics Nipples - Push-Lok Hose Barb** * This dimension represents the portion of the nipple that is exposed when the nipple is connected to a Parker 20 Series coupler * *Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps. A WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov A-8 Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcouplings

Open the catalog to page 14

Pneumatic Quick Couplings -General Purpose 20 Series Couplers Accepts Industrial Interchange Nipples Manual sleeve, single shut off A Pneumatics 20 Series Pneumatic Couplers mate with Industrial Interchange nipples, the standard male tip of the pneumatic industry. Available options include Sleeve-Lok, stainless steel locking balls and springs, and grip-ring sleeve. Features: • Mates with Industrial Interchange nipples manufactured to A-A-59439 (MIL-C-4109F, ISO 6150-B) global standards • 1/4" body size has a brass body and steel valve, 3/8" body size has all steel construction • Tubular valve...

Open the catalog to page 15

Pneumatic Quick Couplings General Purpose A Pneumatics 20 Series Couplers Accepts Industrial Interchange Nipples Manual sleeve, single shut off Couplers - Female Pipe Thread Couplers - Male Pipe Thread * Coupler has brass body and steel sleeve. ** Prop 65 Warning does not apply to stainless steel part numbers. Optional Materials and Features: add code to part number) Code Contact QCD for availability and additional options. To select proper seal materials, see Fluid Compatibility Chart or contact QCD. A WARNING: This product can expose you to chemicals including Lead, which is known to the State...

Open the catalog to page 16

Quick Coupling Products

Quick Coupling Products

Catalog excerpts

All Parker Quick Coupling Division catalogs and technical brochures

Archived catalogs