IH Series Snap-tite Design Pneumatic Quick Couplings General Purpose Manual Sleeve, Single Shut-off IH couplers are steel with a cylindrical valve designed specifically for pneumatic use. When paired with an unvalved/ plain H Series nipple, it functions as a durable single shut-off connection. Standard seal is nitrile. Features: •  Sizes 1/4” - 3/4” •  Steel body material •  Standard seal material is nitrile with other options available •  Optional sleeve lock helps to prevent accidental disconnection •  anually operated sleeve provides secure connection M •  oupler has 360º cylindrical valve contact C Applications include: •  Industrial air lines • Pneumatic tools IH Series Working Pressures (psi) Valved on coupler and unvalved nipple (Single Shut-off) Body Size Steel NOTE: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/or vibration may vary from these ratings. Burst pressures listed were taken at the point at which failure rendered the quick disconnect inoperative. (Proof pressure equals 1-1/2 times the working pressure; burst pressure equals 2 times working pressure.) Cylindrical Pneumatic Valve Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcouplings

IH Series Snap-tite Design Pneumatic Quick Couplings General Purpose Manual Sleeve, Single Shut-off Body Size Thread Size Largest Diameter Wrench Flats Thread Size Largest Diameter Sleeve Lock Wrench Flats H Series Nipples - Unvalved / Plain Body Size Parker Hannifin Corporation Quick Coupling Division Minneapolis, MN www.parker.com/quickcouplings