X-Flow™ Mass Flow Controller ENGINEERING YOUR SUCCESS.

X-Flow™ Mass Flow Controller Highlights Parker Hannifin Precision Fluidics Division is excited to introduce X-Flow™, a new easy to use general purpose mass flow controller for your instrument, lab, or process needs. X-Flow™ delivers fast, repeatable, and reliable high accuracy flow control through proven Constant Thermal By-Pass Mass Measurement Technology coupled with our most popular digital communication protocols. Constant Heat Thermal By-Pass Sensor • Proven and reliable technology • Great low range flow measurements • Minimal impacts from pressure changes • Low pressure drop and blockage...

X-Flow™ Mass Flow Controller Designed and Produced with Simplicity in Mind for: • Analytical Instrumentation • Pharma / Bio Pharma • Emissions Monitoring • Process Industry Needs Included asset management system Parker Tracking System (PTS) • Reduce downtime with automatic reminders based on your calibration cycle • Track your asset’s specific conditions • Centralized location for all documentation Learn more at www.parker.com/PTS Parker Floware: Included free software tools to get the most out of your unit: • View your Flow Signal, Set Point and Output Signal on a graph • Flexibility around...

Measurement / Control System Accuracy Turndown Repeatability Controller Settling Time Control Stability Controllable Flow Range Full Scale Calibration Range Operating Temperature Operating Pressure Temperature Sensitivity Zero Leak Integrity (External) Warm-Up Time Control Valve ±1.0% Full Scale 50:1 <0.2% of Reading 1 second (Nominal) <±0.1% Full Scale (typical for 1 l/min N2) 0.8 ml/min to 20 l/min 40 ml/min to 20 l/min 32 to 122°F, 0 to +50°C 145 PSIG, 10 Barg <0.1% Full Scale/°C; span: <0.1% Reading/°C Tested < 2 x 10-9 mbar l/s He ±2% Full Scale after 2 min, ±1.0% Full Scale after 30 min...

X-Flow™ Mass Flow Controller Gas Flow Range The selected orifice of the control valve may limit the rangeability Standard accuracy (based on actual calibraiton): +/- 1% FS Factors for gas not in the above table are available from the factory All flow ranges are standard conditions of 14.7 PSIA and 0oC Base Model--------- Nitrogen Full Scale Equivalent Flow Range4 •Btandaid DondttariB of 14.7 PBIAand 0"C 00 Hone i i-------------- Supply Voltage D +15-24 Vdlc Analog I/O A 0-5 Vdc G 4-20 mAdc Sourcing Communication (I/O) A Analog + RS232 or ModBus™ Accessories B-1562-039V: 1/8” Compression Fitting...

X-Flow™ Mass Flow Controller Chemical Compatibility Chart X-Flow’s robust proven sensor technology offers a wide variety of gasses that are compatible for use.

X-Flow™ Mass Flow Controller Serving a broad spectrum of life science, air quality, and process instrumentation OEM fluidic needs Providing Pressure and Vacuum: Broad range of diaphragm pumps for Gas and Liquid Gas Flow Control: High to Low Flow Proportional Valves On/Off & Channel Selection Capabilities: Gas and Liquid Solenoid Valves High Precision Thermal Flow Control: Mass Flow Controllers and Meters

Learn More at: solutions.parker.com/X-Flow Below are some common specifications that are helpful to have on hand to accelerate your product selection: • Gas Type • Standard Reference Conditions • Maximum Flow Rate • Process Connection Size and Type • Inlet and Outlet Pressures • Set Point Signal • Operating Temperature • Digital Communication Protocol Preferences For more information call +1 603 595 1500 or email [email protected] Visit www.parker.com/precisionfluidics Recommendations on application design and material selection are based on available technical data and are offered as suggestions...