Helix Pump
12Pages

Helix Pump Miniature High Pressure Pump ENGINEERING YOUR SUCCESS.

When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid valves to highly integrated automation systems, our innovations are critical to life-saving medical devices and scientific instruments used for drug discovery and pathogen detection. Not to mention, critical to decreasing time to market and lowering your overall cost of ownership. So partner with Parker, and get ready to move, well, anything.

Miniature Pumps THIS IS ENABLING POINT OF CARE TESTING Parker Helix Pump Miniature high pressure / oil free piston pump Integrated unloading valve for high pressure restart Low speed operation for dynamic requirements The Parker Helix is a compact, high pressure pump designed to enable the smallest of point-of-care instruments. Helix enables high pressure operation in challenging high altitude environments and applications where external compressed air is not available. Delivering more than 5.5 LPM flow and pressure up to 100 PSI (6.9 bar), the Helix pump provides the best solution for...

Miniature Pumps The Helix is a compact, high pressure pump designed to enable the smallest of point-of-care instruments. Helix enables high pressure operation in challenging high altitude environments and applications where external compressed air is not available. Delivering more than 5.5 LPM flow and pressure up to 100 PSI (6.9 bar), the Helix pump provides the best solution for bench-top diagnostic devices where performance is critical and space is limited. Typical Markets Features • Point-of-Care Testing • Molecular Diagnostics • Nucleic Acid Purification • Genomics • Integrated...

Typical Flow Performance - 0.080” Offset 1.5 VDC Control Input - 1400 RPM Typical Flow Performance - 0.080” Offset 3.0 VDC Control Input - 3000 RPM • Curves show flow capability with 0.080” pump offset. • With a 5.0 Vdc control input the pump will operate at approximately 4400 RPM and up to 8.5 LPM, but not recommended for continuous operation. Miniature Pumps Helix Miniature High Pressure Pump Typical Flo

Helix Miniature High Pressure Pump Miniature Pumps Mounting Guidelines • Mounting holes are provided on both sides of the pump body. The 6x mounting holes are tapped for M4x0.7 machine screws, with a maximum depth of 0.4 inches [10.2 mm] Pneumatic Port Connections • The Helix pump has 2 straight 6mm ports designed to connect with 6mm push-in-fittings • Parker has a 6mm to 6mm push-in fitting available as an accessory. The port is designed to work with most industry standard push-in adapters. • Tubing rated for >100 PSIG (6.9 barg) is recommended. Mechanical Drawings .06 X 45° Chamfer 12.00...

Helix Miniature High Pressure Pump Electrical Integration and Motor Control Intregrated Electrical Connector Manufacturer: Molex Housing Part Number: 43645-0400 Terminal Part Number: 43030-0002 Pin Motor Control Electrical Integration and 1: Tachometer (Green) Pin 2: 0-5VDC Input (White) Pin 3: + VDC Power (Red) Pin 1 - Connector - Mate side Pin 4: -Ground (Black) Manufacturer: Molex Intregrated Electrical Housing Part Number: 43645-0400 UL AWM Style 1006 Connector Terminal Part Number: 43030-0002 Wire Specification +VDC and Ground: 20 AWG 0-5VDC Input and (Green) Pin 1:...

Typical Flow Diagram Point of Care Test System (POCT) Electronic Pressure Controller Check Valve Miniature Pumps Helix Miniature High Pressure Pump Helix Pump Manifold Sample Prep /Introduction Cell Lysis VSO® LowPro Cartridge Filter Nucleic Acid Amplification Purification Application Notes Unloading Valve: A common application for the Helix is intermittently recharging a pressure accumulator in a compact system. The integrated unloading X-Valve removes pressure from the pump head, allowing the pump to restart against system pressures as high as 100 PSIG (6.9 Barg). When operating the pump to...

A Filter-Muffler is always recommended in the air inlet or outlet to reduce noise and risk of debris that may affect pump performance. Parker recommends 40 micron or better filtration to be used with this pump series. 6mm Push-In Fittings are recommended to connect the Helix pump pneumatic ports to tubing. Miniature Pumps Speed at Motor Free Flow PSIg PSIg PSIg PSIg PSIg PSIg Part Number Free Flow Part Number Description HI R - 080 P 24 H V - 02

Helix Miniature High Pressure Pump Miniature Pumps Ordering Information Please refer to sizing and selection chart for identifying which one will fit your application Please click on the Order On-line button below (or go to www.parker.com/precisionfluidics/HelixPump) to configure your Helix Pump. Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts, nor is it recommended to service these in the field Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise to our customers in...

Miniature Pumps Helix Miniature High Pressure Pump Learn More at: solutions.parker.com/HelixPump Below are some common specifications that are helpful to have on hand to accelerate your product selection: • • • • Noise Operating Pressure / Vacuum Power Consumption Life Requirement Size Motor Control Media Voltage For more information call +1 603 595 1500 or email ppfinfo@parker.com Visit www.parker.com/precisionfluidics Recommendations on application design and material selection are based on available technical data and are offered as suggestions only. Each user should conduct their own...