climate control process control sealing & shielding Transair: Advanced pipe systems for Industrials Fluids Catalogue Compressed Air - Vacuum - Neutral Gases ENGINEERING YOUR SUCCESS.

>Technical specifications • Compressed air (dry, wet, lubricated) • Vacuum • Inert gases (argon, nitrogen) • Other fluids: please consult us >Maximum working pressure 13 bar from -20°C to +60°C 16 bar from -20°C to +45°C (except for 168mm) Maximum working pressure versus operating temperature >Vacuum level 98,7 % (13 mbar absolute pressure) >Working temperature >Storage temperature from -40°C to +80°C • corrosion • aggressive environments • mechanical shocks • thermal variations • U.V. • compressor oil carry over Materials are 100% recyclable. For silicone free applications: please consult us....

Select the TRANSAIR® diameter for your application based on required flow against pressure drop. Estimated values for: a closed loop network, a pressure of 8 bar with 5% pressure drop. Velocity is not taken into account. Flow rate • Main network length (ring main): 300 metres • Compressor power: 30 kW • Required flow rate: 250 Nm3/h (147 cfm) • Working pressure: 8 bar • The most suitable Transair® diameter is: Ø 40. To size your air pipework system, you can also use the TRANSAIR® FLOW CALCULATOR. For more information, refer to page 5 of this catalogue.

>Flow rates and pressure drop Measurements provided by the official French testing body CETIM - Centre Technique des Industries Mecaniques. Charts are based on a 30m straight Transair® line. Maximum flow rate with 5% pressure drop Maximum flow rate with 0,1 bar pressure drop.

>Transair® Flow Calculator The TRANSAIR® FLOW CALCULATOR helps you to choose the most suitable diameter for your installation. Enter the flow of your compressor, the system pressure rating and the total equivalent length of the system. Select ring main or straight line layout, enter your preferred unit of calculation and then click for an immediate indication of the most suitable Transair® diameter (with a pressure drop of less than 5%). [ri Tranuir Flow Calculate We recommend Ihe use of 3 ring main line. A ring marn line has only half of the pressure drop lhan mat of a slraighl run Tor the same...

>Fire resistance >Electrical conductivity All TRANSAIR® components are non-flammable with no propagation of flame. • pipe-to-pipe and stud connectors, ball valves and butterfly valves : conform to UL94HB standard • fixture clips : conform to UL94V-2 standard • flexible hoses : conform to ISO 8030 norm for compressed air applications, and to EN 12115 norm for vacuum applications • pipe lacquer finish classified M0 In areas of potential risk, the earthing and electrical continuity of metallic components are obligatory. The Transair® system can be used in such environments by undertaking the appropriate...

>Certification and Guarantee >Certification ISO 9001 version 2000 Legris S.A. is certified ISO 9001 version 2000 and operates a Quality Management System in order to ensure the level of quality and service that is expected by its customers. >TÜV certification A product certified TÜV is a pledge of safety and quality. The Group TÜV thus certifies independent test results – in particular, the properties of the products and the standards whereby they were examined. >QUALICOAT certification QUALICOAT certification is a guarantee of the quality of the lacquer finish applied to Transair° aluminium...

lacquered aluminium lacquered aluminium lacquered aluminium lacquered aluminium lacquered aluminium lacquered aluminium hose and coating : black SBR reinforcement : synthetic braiding hose and coating : black SBR reinforcement : synthetic braiding seal: EPDM hose and coating : black SBR / NBR reinforcement : spiral steel wire hose and coating : black SBR / NBR reinforcement : spiral steel wire hose and connector: black SBR/NBR reinforcement : spiral steel wire engineering grade plastic body: engineering grade plastic nut: treated aluminium body and pushing ring : engineering grade plastic - seal:...

>Transair® Technology Innovative technology at the heart of TRANSAIR® enables rapid and easy assembly: quick connection of components to the aluminium pipe. This technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection. Pipe-to-pipe and stud connectors in Ø 16,5, Ø 25 and Ø 40 can be immediately connected to Transair® pipe - simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe. tightening marks gripping...

A number of additional Transair® services help you throughout your projects. Understanding, Proximity, Responsiveness. Field support TRANSAIR® technical-commercial teams are at your disposal to study and help design your air network. In particular, they assist you in your project with : • Information on the TRANSAIR® products and services, • Guidance and training on how to assemble the system, • Advice on “best practice” in order to reduce your consumption of energy, • Ongoing assistance and follow-up. • On-site advisory presence at construction and installation locations. Internally Our CUSTOMER...

> Transair design software Installation sizing System layout and drawing Shopping list Available on CDROM • Practical information • Downloadable literature files: catalogues, information on new products, introductory leaflet, instruction guidelines, newsletter. All TRANSAIR® CAD drawings are available on a CDROM - in formats DWG, DXF and PS. Formal technical specifications for the TRANSAIR® system are available in either Word or PDF format and can be directly integrated into your own documents.