Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards

Product catalog summary

Overview: This document provides detailed information on Transair advanced pipe systems for industrial fluids, focusing on air quality standards and specifications for compressed air purity according to ISO8573-1:2010.

Air Quality Standards: The document outlines the international standards for compressed air quality, specifically ISO8573-1:2010, which specifies air purity classes for solid particulates, water, and oil. The standard is crucial for determining the required air purity at different usage points in a system.

ISO8573-1:2010 Specifications:

Class 1 Particulate: Limits the number of particles per cubic meter in specified micron size ranges.
Class 2 Water: Requires a pressure dew point of -40°C or better with no liquid water.
Class 1 Oil: Allows a maximum of 0.01mg of oil per cubic meter.

Class 0 is also discussed, emphasizing that it requires a written specification agreed upon by the user and manufacturer.

Transair Capabilities: The document highlights the importance of purification equipment to achieve desired air quality and the role of Transair piping systems in maintaining this quality. It stresses the need for compliance with ISO8573-1:2010 and the use of Transair products for optimal performance.

Product Specifications:

Aluminium Range: Available in various diameters with specific working pressures and temperatures, compatible with lubricated or oil-free compressed air, industrial vacuum, and inert gases.
Stainless Steel Range: Suitable for cooling water, industrial water with additives, lubricating oil, compressed air, and inert gases, with specific pressure and temperature ratings.

Tools and Services: Transair offers online resources, including a flow calculator, energy efficiency calculator, and CAD drawings. They provide project studies and quotations upon request.

Contact Information: The document lists contact details for Parker Hannifin Corporation's offices worldwide, providing phone numbers and email addresses for various regions.

Catalog excerpts

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-1

Transair: Advanced pipe systems climate control process control sealing & shielding ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-2

The international standards for Compressed Air Quality The most common ISO standards used for compressed air quality are: ISO8573 Series is the most commonly used standard and in particular ISO8573-1:2010, used to specify the purity of air required at a particular point of use. ISO12500 Series: is used to verify performance of filters. ISO7183 Series: is used to verify performance of dryers. ISO8573-1 is the primary document used from the ISO8573 series, as it is this document which specifies the amount of contamination allowed in each cubic metre of compressed air. ISO8573-1 lists the main contaminants...

Open the catalog to page 2

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-3

Transair capabilities on air quality Solid Particulate ISO8573-1:2010 CLASS Maximum number of particles per m3 0.1 – 0.5 µm Water Mass Concentration mg/ m3 Vapour Pressure Dewpoint Total Oil (aerosol liquid and vapour) mg/ m3 As specified by the equipment user or supplier and more stringent than Class 1 * : Transair in line with standard after 1 purge ** : Transair in line with standard depending on the atmospheric conditions > Reminder 1. Purification equipment is installed to provide air quality and you must first of all identify the quality of compressed air required for your system. Each...

Open the catalog to page 3

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-4

TRANSAIR: Advanced pipe systems Aluminium range: Stainless steel range: Calibrated aluminium pipes Stainless steel pipes Qualicoat painting Available in blue - grey - green Other colours upon request Maximum working pressure Maximum working pressure Working temperature Working temperature EPDM or FKM seals Compatibilities Lubricated or oil-free compressed air, industrial vacuum, inert gases. Cooling water, industrial water with additives, lubricating oil, compressed air, inert gases.

Open the catalog to page 4

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-5

TRANSAIR: Tools and services The Transair Flow Calculator • defines the recommended diameter for your project • estimates your pressure drops • gives the maximum flow rate by diameter The Transair Energy Efficiency Calculator evaluates the energy cost of your network and return on investment of a Transair solution. CAD drawings you can view or download in real time Transair product plans in 2D or 3D. Our Website: www.parkertransair.com gives you access to extensive information about the Transair solution, technical data, examples of existing networks and a download center for catalogues, manuals,...

Open the catalog to page 5

Parker Transair - Advanced pipe systems for Industrial Fluids Air Quality Standards-6

Parker Worldwide Europe, Middle East, Africa AE – United Arab Emirates, Dubai Tel: +971 4 8127100 [email protected] AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 [email protected] AT – Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 [email protected] North America IE – Ireland, Dublin Tel: +353 (0)1 466 6370 [email protected] CA – Canada, Milton, Ontario Tel: +1 905 693 3000 IT – Italy, Corsico (MI) Tel: +39 02 45 19 21 [email protected] KZ – Kazakhstan, Almaty Tel: +7 7272 505 800 [email protected] Asia Pacific NL – The Netherlands,...

Open the catalog to page 6