HY17-8702-UK_PLC
12Pages

{{requestButtons}}

Catalog excerpts

HY17-8702-UK_PLC - 1

climate control process control sealing & shielding Auxiliary Valves Direct-acting Pressure Relief Valves ENGINEERING YOUR SUCCESS.

Open the catalog to page 1
HY17-8702-UK_PLC - 2

Pressure relief valves List Of Contents Page Subject to alteration without prior notice. The curves and diagrams in this catalogue are typical examples only. While the contents of the catalogue are updated continuously, the validity of the information given should always be confirmed. For more detailed information, please contact Parker Hannifin. A WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin...

Open the catalog to page 2
HY17-8702-UK_PLC - 3

General Information Pressure relief valves The PLC series auxiliary valves are direct- acting, factory-set pressure relief valves of the cartridge type that can be supplied with or without a threaded plug. They can also be supplied with housings to facilitate in- line installation. PLC valves are intended primarily to act as combined pressure-relief and anti- cavitation valves - otherwise known as port relief valves - in the service ports of our directional valves. However, they can also be used to advantage in other situations where pressure relief valves in this size range are required....

Open the catalog to page 3
HY17-8702-UK_PLC - 4

Technical Information Pressure relief valves Diagram for PLC053 pressure relief valve Ap (bar) Pressure override characteristic Unless stated otherwise: V Edges broken 0.1-0.5 unless Indicated otherwise Hydraulic symbol for Anti-cavitation pressure relief valve valve (N) Seat embossed with 013 mm class III steel ball Stated dimensions apply before embossing Machining tools can be purchased from Parker Hannifin. Parker Hannifin Mobile Controls Division Europe Borás, Sweden

Open the catalog to page 4
HY17-8702-UK_PLC - 5

Pressure relief valves Single housing Hydraulic symbol for single housing Technical Information Diagram for PLC053 pressure relief valve Ap (bar) Pressure override characteristic PLC053 mounted in single housing The PLC053 mounted in a single housing can be ordered using the ordering numbers below. Should you require a pressure setting not listed in the table, please contact your Parker Hannifin Parker Hannifin Mobile Controls Division Europe Borás, Sweden

Open the catalog to page 5
HY17-8702-UK_PLC - 6

Pressure relief valves PLC082 series Catalogue HY17-8702/UK Dimensions Diagram for PLC082 pressure relief valves       ∆p (bar) Pressure override characteristic 500 400 300 200 100 0 0 25 50 75 100       ∆p (bar) Anti-cavitation characteristic q (l/min) 30 25 20 15 10 5 0 0 25 50 75 100 q (l/min) Hydraulic symbol for pressure relief valve 6,3 Unless stated otherwise: Edges broken 0.1-0.5 unless indicated otherwise 15°±1° P 0 Ø25,3 -0,1 2±0,2 2,5 0,1 A R1±0,2 T +2 Ø30 0 M24x1,5 - 6H 4 R0,2±0,1 45°±5° 0,1 A 46,5 min 30 max 37±0,1 16 min 0,05 A T 35°±1° Seat embossed with Ø16 mm class III...

Open the catalog to page 6
HY17-8702-UK_PLC - 7

Pressure relief valves PLC082 series Catalogue HY17-8702/UK Dimensions Single housing P T Hydraulic symbol for single housing 40 Connection T, Tank* 18 Connection P (pressure)* 75 15 38 86 Connection P (pressure)* (18) 50 10 60 80 Mounting hole Ø11 (2x) 18 SW = 12, T = 80 Nm *) Thread dimension G ½ or G ¾. See page 11. SW = spanner width T = tightening torque 7 Parker Hannifin Mobile Controls Division Europe Borås, Sweden

Open the catalog to page 7
HY17-8702-UK_PLC - 8

Pressure relief valves PLC082 series Catalogue HY17-8702/UK Dimensions Double housing M1 T M2 11 40 Hydraulsymbol för dubbelhus Connection T, Tank, plugged (G 3/4) 32 106 64 (32) 68 75 48 11,5 21 SW = 12, T = 80 Nm (2x) Connection M1, pressure (2x)* 56 Mounting hole Connection M2, pressure (2x)* Ø11 (3x) *) Thread dimension G ½ or G ¾. See page 11. SW = spanner width T = tightening torque 8 Parker Hannifin Mobile Controls Division Europe Borås, Sweden

Open the catalog to page 8
HY17-8702-UK_PLC - 9

Pressure relief valves PLC082 series Catalogue HY17-8702/UK Technical Information Diagram for PLC182 pressure relief valves     ∆p (bar) Pressure override characteristic 500 400 300 200 100 0 0 25 50 75 100 125 150 175     ∆p (bar) 200 q (l/min) Anti-cavitation characteristic 30 25 20 15 10 5 0 25 50 75 100 125 150 175 0 M24x1,5-6H +0,084 Ø20 0 A Ø14 +0,07 0 Ø0,2 A 0,1 A 2,5 2±0,2 R1 max Hydraulic symbol for pressure relief valve P 0,1 0 Ø25,3 -0,1 15°±1° 200 q (l/min) 4 2,5 0,05 A (56) 0,7±0,2 R0,4 max alt. 0,4x45° max Ø T m in ** applies to Ø14 + 0.07/0 *** applies to Ø14 2,5 1±0,2 4 **68...

Open the catalog to page 9
HY17-8702-UK_PLC - 10

Pressure relief valves PLC280 series Catalogue HY17-8702/UK Technical Information Diagram for PLC280 pressure relief valve       ∆p (bar) Pressure override characteristic 500 400 300 200 100 0 0 50 100 150 200 250 300       ∆p (bar) Anti-cavitation characteristic 350 q (l/min) 20 Without drainage of spring chamber With drainage of spring chamber 15 10 5 0 Seat embossed with Ø25 mm class II steel ball Impact energy 18±3 Nm Stated dimensions apply before embossing R0,6 max alt. 0,6x45° max R0,2±0,1 alt. 0,2±0,1x45° 0,05 A 2,5 5 2xR1±0,1 +0,1 Ø35,4 0 R0,4 max alt. 45°±5° 3,7 +0,2 0 R1 max...

Open the catalog to page 10
HY17-8702-UK_PLC - 11

Pressure relief valves PLC-series pressure relief valves can be ordered using the ordering numbers in the table below. Should you require a pressure setting not listed in the table, or require the pressure setting to be made at a flow different to standard, please contact your Parker Hannifin representative. * Anti-cavitation valve without pressure-relief function PLC082 mounted in single housing The PLC082 mounted in a single housing can be ordered using the ordering numbers below. Should you require a pressure setting not listed in the table, please contact your Parker Hannifin...

Open the catalog to page 11
HY17-8702-UK_PLC - 12

Parker Worldwide Europe, Middle East, Africa AE - United Arab Emirates, AT - Austria, Wiener Neustadt AT - Eastern Europe, Wiener AZ-Azerbaijan, Baku BE/LU - Belgium, Nivelles CZ - Czech Republic, Klecany FR - France, Contamine s/Arve PT - Portugal, Leca da Palmeira SK - Slovakia, Banská Bystrica SL - Slovenia, Novo Mesto UK - United Kingdom, Warwick ZA-South Africa, Kempton Park North America CA- Canada, Milton, Ontario Asia Pacific AU - Australia, Castle Hill KR - South Korea, Seoul MY - Malaysia, Shah Alam South America AR - Argentina, Buenos Aires D 2011 Parker Hannifin Corporation. All...

Open the catalog to page 12

All Parker Industrial Gas Filtration and Generation Di catalogs and technical brochures

  1. Y14

    2 Pages

  2. Cover

    2 Pages

  3. 20Lo-Torq

    2 Pages

Archived catalogs