HY17-8356-UK_VP04
12Pages

{{requestButtons}}

Catalog excerpts

HY17-8356-UK_VP04 - 1

climate control process control sealing & shielding Remote Control Pneumatic Proportional Remote Control Valve ENGINEERING YOUR SUCCESS.

Open the catalog to page 1
HY17-8356-UK_VP04 - 2

Catalogue Information Remote Control - Pneumatic Catalogue layout This catalogue has been designed to give a brief overview of the VP04, and to make it easy for you to study and choose from the different options available, so that we may customize your remote control valve in accordance with your wishes. In addition to general information and basic technical data, the brochure there- fore contains descriptions of the options available for the valve. Each function area is given as a subheading, e.g. Connections, followed by a brief description. This is followed by a series of coded options,...

Open the catalog to page 2
HY17-8356-UK_VP04 - 3

Remote Control - Pneumatic List Of Contents Page Parker Hannifin Mobile Controls Division Europe Borás, Sweden

Open the catalog to page 3
HY17-8356-UK_VP04 - 4

General Information - Order code Remote Control - Pneumatic control-pressure valve intended for the proportional, pneumatic remote control of directional valves, positioning cylinders etc. It can be supplied with a coordinate lever (joystick) or different linear levers. Freedom in machine design Good machine design is heavily dependent on the availability of flex- ible components and systems that can be combined in different ways to give optimum operating and control characteristics. Parker Hannifin control systems give you the freedom to design your machines the way you want them, since...

Open the catalog to page 4
HY17-8356-UK_VP04 - 6

Technical Data Remote Control - Pneumatic Supply pressure (at least 2 bar higher than Control pressure Volume rate of flow Lever forces Normal force for linear lever fully actuated Normal force for coordinate lever one function fully actuated two functions fully actuated agent to reduce freezing-point). The air quality determines the service life of the valve. If the filtration demands are not met, the valve poppet can jam in the open position, with the result that the valve remains actuated. It is not possible to force back a jammed poppet mechanically. Parker Hannifin Mobile Controls...

Open the catalog to page 6
HY17-8356-UK_VP04 - 7

Technical Information Remote Control - Pneumatic Electrical data Concerns switch in E-type levers. Data given below is what is needed to obtain maximum service life. The values can be exceeded with retained function, but will result in a reduction in service life. In the event of inductive loading, a protective diode must be fitted. Breaking capacity All connections are equipped with push-in connectors and are available for different pipe dimensions. Signal ports are available with connections for 06 mm or 01/4" pipe. Supply and return ports are available with connec- The weight of the unit...

Open the catalog to page 7
HY17-8356-UK_VP04 - 8

Technical Information Remote Control - Pneumatic Every valve is customized. The following options are used to configure a valve. 2-16 Each valve section contains two control-pressure ports. Two valve sections are needed for coordinate levers (joysticks), since they require 4 control-pressure ports. M For 08 mm pipe in supply and return ports, and 06 mm pipe in the control-pressure ports. Lever units are available in several different versions. For coordi- nate movements (4 control-pressure ports), the H1, E1, E2, E3 For linear movements (2 control-pressure ports), the H2, H3, E1, E2, E3 and...

Open the catalog to page 8
HY17-8356-UK_VP04 - 9

Technical Information Remote Control - Pneumatic The control-pressure curve is proportional to the lever stroke. For maximum signal pressure to be obtained, the supply pressure must be at least 2 bar higher than the maximum control pressure. 8 Max. actuation gives a 8 bar control-pressure signal. Max. actuation gives a 7 bar control-pressure signal. Lever detent options [5] MD2 Detent for linear levers that locks the lever in the fully actuated position. The lever is moved out of the detented position by pulling it to release the detent. A09 Detent for H2 lever that locks the lever in the...

Open the catalog to page 9
HY17-8356-UK_VP04 - 12

Parker Worldwide Europe, Middle East, Africa AE - United Arab Emirates, AT - Austria, Wiener Neustadt AT - Eastern Europe, Wiener AZ-Azerbaijan, Baku BE/LU - Belgium, Nivelles CZ - Czech Republic, Klecany FR - France, Contamine s/Arve PT - Portugal, Leca da Palmeira SK - Slovakia, Banská Bystrica SL - Slovenia, Novo Mesto UK - United Kingdom, Warwick ZA-South Africa, Kempton Park North America CA- Canada, Milton, Ontario Asia Pacific AU - Australia, Castle Hill KR - South Korea, Seoul MY - Malaysia, Shah Alam South America AR - Argentina, Buenos Aires D 2011 Parker Hannifin Corporation. All...

Open the catalog to page 12

All Parker Industrial Gas Filtration and Generation Di catalogs and technical brochures

  1. Y14

    2 Pages

  2. Cover

    2 Pages

  3. 20Lo-Torq

    2 Pages

Archived catalogs