10MFP Series with Moduflow Plus Portable Filtration Trolley The ideal way to pre-filter and transfer fluid Transfer fluid from drums or storage tanks Using a Parker portable filter trolley is the most economic way to protect your system from the harm that can be caused by contamination. Option. Consider specifying an icountPD particle detector to allow accurate detection of particulate when transferring oil. The CE marked 10MFP filtration trolley will operate with a maximum recommended viscosity of 800 cSt. Parker Hannifin Hydraulic Filter Division Europe European Product Information Centre Freephone: 00800 27 27 5374 (from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IT, PT, SE, SK, UK) [email protected] www.parker.com/hfde • 10MFP hydraulic trolley is the ideal way to pre-filter and transfer fluids into reservoirs or to clean up a system. • Heavy-duty frame but still lightweight and portable. • Maximum flow 38 l/min. • CE marked. • 10MFP trolley operating viscosity range - use below 800 cSt. (Note: icountPD recommended viscosity level is 108 cSt.) • Par-Gel water removal elements available. • icountPD particle detector with MS Moisture Sensor option. Parker Hannifin Hydraulic Filter Division Europe FDHB500UK/10MFP

• Filtering new fluid before putting into service • Transferring fluid from drums or storage tanks to system reservoirs • Conditioning fluid that is already in use • Complimenting existing system filtration • Removing free water from a system • For use with fluids such as hydraulic, gear and lube oils • Maximum viscosity is 800 cSt. The icountPD configuration with an online STI size 0 sensor allows a fluid viscosity range of 1 to 108 cSt Parker portable filter trolleys are the ideal way to prefilter and transfer fluids into reservoirs or to clean up existing systems. Fluid should always be filtered...

Features Hose & wand assembly Service cover • eady to use R • Flexible hoses for tight spots • ink-resistant hose prevents K pump cavitation • ndependent monitoring of I system contamination trends • ISO code range 7 - 22 • Self diagnostic software • Moisture sensor [%] RH • Top-accessible for easy changing of elements Visual indicator Heavy Duty frame Dual filters “Moduflow” type • wo stage, double length T filtration for long element life and pump protection Electrical Box • 0MFP motor/pump 1 current trip limiter set to 240V unit = 3.50 Amps 110V unit = 6.00 Amps Elements (see ordering information)...

Dimensions (Approx.) (mm / inches) International codes icountPD calibration icountPD recalibration Unit Ambient storage temperature A - Height : 1029mm / 40.5” B - Width : 648mm / 25.5” C - Depth : 483mm / 19” 62kg / 137Ibs Laser diode for optical detection of actual particulates ISO 7 - 22 By recognised online methods confirmed by the relevent ISO procedures: MTD - via a certified primary ISO 11171 automatic particle detector using ISO 11943 principles, with particle distribution reporting to ISO 4406:1996 Every 12 months: [email protected] -26°C to +70°C (-79°F to + 158"F) Pump Flow Rate...

Typical Fluid Cleanliness Level Requirements Many manufacturers of hydraulic components have established fluid cleanliness levels for their components. Using a portable filter trolley can be a very effective way to reach and maintain these cleanliness levels. Filter Trolley Performance Fluid cleanliness levels are a function of initial contamination levels, contamination ingression rates, reservoir size and filter element efficiency. The chart below lists approximate time requirements to achieve certain cleanliness levels based on the assumptions noted. Reservoir Capacity (Litres) Time Required...

ON/OFF Switch No electrical power Defective motor Filter housing not filled with oil Suction leak Defective pump Element dirty Oil extremely cold or viscous No outlet element 40 micron element installed in outlet filter Assembly 1. Install hoses to inlet and outlet filters by threading the hose end with the straight thread o-ring seal fitting into the filter flange. 2. Connect the PVC tube wands to the swivel fitting on the hose end. When servicing the PVC tube wand, do not over-torque the metal fittings going into the PVC coupling. Over-torque will result in cracking the coupling. Generally,...

(For more information consult Parken 940980 Pipe Reducer Fitting 1 937526 Suction Tube Assy. 1 937527 Discharge Tube Assy. 1 941467 Discharge Tube Top (SmartCart) 1 941466 Discharge Tube Bottom (SmartCart) 1 940960 Inlet Filter - Nitrile 1 941024 Inlet Filter - Fluorocarbon 1 928784 Tube Wand Assy. - Seal Option B 2 940961 Outlet Filter - Nitrile 1 941025 Outlet Filter - Fluorocarbon 1 928663 Hose Assy. - Seal Option B 2 See Chart** Element, (1) Inlet & (1) Outlet 2 **Refer' to Chari on the ordering information page. Parker Hannifin Hydraulic I ilter I'Hsi-ii I mope IHHBS'OoilK loMIP

Parker Moduflow Plus outlet filter (pressure) 2.4 bar bypass Accessory part numbers Description Parker Hannifin Hydraulic Filter Division Europe FDHB500UK/10MFP