Hydraulic Hose – PARKER FCG

# Part Number Impulse test conducted with Parker Fittings. “All hoses upto -16 have passed 1,50,000 cycles impulse test at half the Min. bend radius". *Not covered under HS/SAE/EN Markets Type Approvals: BV, DNV-GL, LR, MED, ABS Application: Recommended for medium pressure hydraulic oil lines. 301SN Construction: Inner tube Reinforcement Outer Cover NBR - Synthetic rubber One braid steel wire NBR-PVC synthetic rubber Temp. Range - 40°C to 100°C (-40°F to 212°F) Impulse Cycles: Specified -1,50,000 cycles. Tested upto - 3,00,000 cycles. # Part Number 0 Machine Tool Waste & Refuse Ground Support...

# Part Number * Impulse test conducted with Parker Fittings. Markets Application: Recommended for very high pressure hydraulic power lines. Construction: Inner tube Reinforcement Outer Cover CR - Synthetic rubber Four spiral steel wire CR - Synthetic rubber Temp. Range - 40°C to +100°C (-40°F to +212°F) Impulse Cycles: Specified - 4,00,000 cycles Tested up to - 8,00,000 cycles Type Approvals: BV, LR, MED # Part Number ‘Under validation with Parker fittings / specification ‘Impulse test conducted with Parker Fittings. Markets Application: Recommended for very high pressure hydraulic power lines....

# Part Number * Under validation with Parker fittings / specification * Impulse test conducted with Parker Fittings. Markets Application: Recommended for very high pressure hydraulic power lines. Constant pressure on all IDs upto 1" Construction: Inner tube : CR - Synthetic rubber Reinforcement : Four spiral steel wire Outer Cover : CR - Synthetic rubber fiii—^-'l Temp. Range - 40°C to +125°C (-40°F to +257°F) Impulse Cycles: Specified - 5,00,000 cycles Tested up to -10,00,000 cycles Type Approvals: BV, LR, MED # Part Number Markets Application: Recommended for very high pressure hydraulic power...

Markets Application: Recommended for hydraulic low pressure lines, return lines & drain lines. Construction: Inner tube Reinforcement Outer Cover NBR- Synthetic rubber One synthetic textile braid SBR- Synthetic rubber PUSH-LOK® 801 - Push-Lok Plus® Multipurpose Available Cover Colors: # Part Number Markets Application: Pneumatic, Petroleum base hydraulic fluids, lubricating oils and antifreeze solutions. Diesel fuel - approved only when coupled with HY Series fittings. Construction: Inner tube : Synthetic rubber Reinforcement : One fiber braid Outer Cover : Synthetic rubber, MSHA accepted

Gujarat: Mobile : +91-9643077861 E-mail: [email protected] Uttarakhand: Mobile : +91-8979994449 E-mail: [email protected] Hyderabad: Mobile : +91-9901901237 E-mail: [email protected] UP: Mobile : +91-9560894782 E-mail: [email protected] Mobile : +91-7290037256 E-mail: [email protected] Kolkata: Mobile : +91-9831217515 E-mail: [email protected] Mumbai & Pune: Mobile : +91-8408906688 E-mail: [email protected] Delhi, Faridabad & Chhattisgarh: Mobile : +91-8800593797 E-mail: [email protected] Mobile : +91-8800683225 E-mail:...