Catalogs >
Parker Hannifin France SAS >
PR-1 Pressure Regulator

PR-1 Pressure Regulator
2Pages

Catalog excerpts

PR-1 Pressure Regulator Product Overview The 1/4” Pressure Regulators are designed for use in high purity semiconductor applications, and are also ideally suited for ultra-pure water and aggressive chemicals. The design utilizes a machined PFA body with precision machined seat. One piece precision machined diaphragms manufactured from the latest technology modified PTFE. High cycle life. Provides over five times the flexural life as compared to conventional PTFE. Less downtime. Non-relieving designrequires a 10 psi differential across the valve. Stabilizes system pressure. Ideal for use in DI water systems. Lower replacement costs. Low hysteresis. Tongue and groove diaphragm. Seal provides protection for springs and adjusting screw. Specifications Materials of Construction: Wetted Surfaces - PFA, Modified PTFE Non Wetted Surfaces - ABS, Brass, SS, PVDF, SS Spring, Chrome Vanadium Die Spring, HDPE. Pressure Ranges: Max Primary Pressure - 120 PSIG (8.3 bar) Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG Pressure ranges above are for operation at ambient temperature. For use at higher temperatures consult Pressure/Temperature chart on page 3. Parker Hannifin Corporation Partek Tuc

Open the catalog to page 1

PR-1 Pressure Regulator BRACKETED DIMENSIONS ARE IN mm. PANEL NUT Ø1.50 [38.10] PANEL HOLE TO CLEAR 1 3/8”-14 Model Number Trim Material Secondary Pressure-X Parker Hannifin Corporation Partek Tucson, AZ

Open the catalog to page 2

PR-1 Pressure Regulator 2Pages

Catalog excerpts

All Parker Hannifin France SAS catalogs and technical brochures

PR-1 Pressure Regulator
2Pages