NX8M Motor Series Low Voltage Motor for Electro Hydraulic Pump Applications
12Pages

NX8M Motor Series Low Voltage Motor for Electro Hydraulic Pump Applications

WARNING — USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. • This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. • The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and...

Inverters for Hybrid and Electric Vehicles Low Voltage Motor - NX8HM Overview5 Technical Specifications6 Dimensions

Low Voltage Motor - NX8HM www.parker.com/eme Low Voltage Motor - NX8HM Overview The easy to implement NX8M permanent magnet AC motor is the ideal choice for your electro hydraulic pump applications, allowing a direct pump assembly without any mounting interface. It is also capable of working immersed in oil, allowing improved pump performance and lower noise level. This cost effective solution has been engineered for both on and off-road vehicles. The high torque density and high efficiency of Parker Permanent Magnet AC (PMAC) motors combined with a voltage matched inverter provide a...

Low Voltage Motor - NX8HM Technical Specifications Technical Specifications Front face cooled 60°C Inverter input voltage 24Vdc Motor Type* Motor data for standard air cooled with front flange surface exchange of 60°C * Other motor performances and oil immersion capability are available on request. Please contact Parker. Cold plate water cooled 65°C Inverter input voltage 24Vdc Motor Type Motor Type Cold plate oil cooled 65°C Inverter input voltage 24Vdc

Low Voltage Motor - NX8HM Dimensions L1 3x M6x1 depth 13 For power connection Membrane breather vent Do not cover TE HDSCS 12 pins Male pins connector P/N 1-1564520-1 Recommended mating part : 1-1703639-1 Splines 16/32 Flat root side fit NX8HM LIQUID INTERFACE With cold plates COOLING (for oil and water cooling) : 185 INLET LIQUID COOLING INTERFACE DATA Threads depth L4 Threads Motor size 146 same length for all motor sizes General Tolerances THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION. THIS DOCUMENT IS FURNISHED ON THE...

product Lugs Heat Shrink 2 2 Shield connectors to be used with each power cable Cable Huber + Suhner 35mm² 1 DOKU_MB Ref : MB 100/10/M6+M4/MSKL 8-18 100/10/M6+M4/MSKL 2 Shield connector product Lugs M6 Lugs M8 Heat Shrink Cable Shield connector Huber + Suhner 70mm² DOKU_MB 100/10/M6+M4/MSKL 8-18 1 Heat Shrink Inverter Compatibility GVI-C GVI-D / E GVI-D / E * x indicates cable length in meters : A=1m B=2m C=3m D=4m 31 Description Connector + sensor cable / SinCos(1) * x indicates cable length in meters : B=2m D=4m 10 4 Bd Eiffel. CS 40090 21604 LONGVIC CEDEX Description Power cable 35 mm2...

Low Voltage Motor - NX8HM Inverter Low Voltage Global Vehicle Inverter - GVI Thanks to an IP65 protection class, the drive can be direct vehicle mounted without an enclosure. (no direct high pressure spray) On-board Fuse Connector Battery connections Membrane breather vent area to avoid condensing Higher reliability in harsh conditions. Single automotive "Amp Seal" connector for CAN, I/O and encoder connections U-V-W Motor connections High efficiency cold plate design Heat sink is sized to support 2 min. of peak current Technical Data Output Product Code Output Current [Arms] S2, 1 h(2)...

Low Voltage Motor - NX8HM Order code Motor frame size Stack length module Natural convection External cooling (oil cooling) External cooling (water cooling) Internal connection type Mobile low voltage SinCos SAE A spline shaft - motor immersed in oil (IP54) SAE B spline shaft - motor immersed in oil (IP54) Terminal + feedback connector

Parker’s Motion & Control Technologies At Parker, we’re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitability by engineering the best systems for their requirements. It means looking at customer applications from many angles to find new ways to create value. Whatever the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows more about motion and control technology than Parker. For further info call 00800 27 27 5374 Fluid & Gas Handling Key...

www.parker.com European Headquarters La Tuilière 6, 1163 Etoy, Switzerland Tel: +41 21 821 85 00 © 2022 Parker Hannifin Corporation. All rights reserved. Your authorized Distributo