Needle Valves Catalog 4110-NV

Parker Hannifin Corporation Instrumentation Products Division Jacksonville, AL USA http://www.parker.com/ipd

WARNING – USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning...

V Series Needle Valves Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process, power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities ranging from -65°F to 450°F (-54°C to 232°C) and pressures to 5000 psig (345 bar), V Series Needle Valves provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems. Features Choice of three stem types: R-Stem – All metal, blunt stem tip N-Stem – All metal, tapered needle stem tip K-Stem – PCTFE stem tip Differential...

V Series Needle Valves Stem Types PCTFE tipped Note: To determine MPa, multiply bar by 0.1 Materials of Construction (with PTFE Packing) Item # Part Description Lower Packing Washer Handle Screw Packing** Stem ( R and N Stem) Stem (K Stem) Upper Packing Washer Panel Nut*** Stainless Steel ASTM A 182 Type F316 ASTM A 479 Type 316 Nylon 6/6 with SS insert ASTM A 479 Type 316 Stainless Steel PTFE ASTM A 276 Type 316 ASTM A 276 Type 316, with PCTFE Brass ASTM B 283 Alloy C37700 ASTM A 479 Type 316 Nylon 6/6 with SS insert ASTM A 479 Type 316 Stainless Steel PTFE ASTM A 276 Type 316 ASTM A 276 Type...

V Series Needle Valves Dimensions / Flow Data Panel Hole Diameter: 0.45 (11.4) Max Panel Thickness: 0.25 (6.4) Panel Hole Diameter: 0.52 (13.2) Max Panel Thickness: 0.25 (6.4) * Max Open 2.58 (65.5) Min Close 2.25 (57.2) Panel Hole Diameter: 0.64 (16.3) Max Panel Thickness: 0.25 (6.4) * Note: Handle diameter for K Stem V6 Series Valves is 1.38 (35.4) ( ) Denotes dimensions in millimeters Parker Hannifin Corporation Instrumentation Products Division Jacksonville, AL USA http://www.parker.com/ipd

V Series Needle Valves End Connections Inlet (Port 1) Stem Type Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Orifice Inch Flow Data Inline * Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = xT . † For CPI™ and A-LOK®, dimensions are measured with nuts in the finger tight position. Dimensions in inches/millimeters...

V Series Needle Valves V Panel Hole Diameter: 0.77 (19.6) Max Panel Thickness: 0.40 (10.2) Panel Hole Diameter: 0.77 (19.6) Max Panel Thickness: 0.40 (10.2) End Connections Inlet (Port 1) Stem Type Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Blunt Needle PCTFE Orifice Inch * Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = xT . † For CPI™ and A-LOK®, dimensions are measured with nuts in the finger tight position. ( )...

V Series Needle Valves How to Order The part number sequence identifies product characteristics as shown below Example: 4Z-V4AK-SS describes an angle pattern V4 Series needle valve equipped with 1/4" CPI™ compression inlet and outlet ports, a PCTFE tipped stem, PTFE seals, and stainless steel construction. 4Z Connection Size & Type Valve Series & Flow Pattern Stem Type – Stem Seal Body Material How to Order Options O-Ring Packing - Add the designator corresponding to the desired elastomer to the part number BN - Nitrile Rubber, EPR -Ethylene Propylene Rubber, or V - Fluorocarbon Rubber. Example...

U Series Needle Valves Introduction Parker U Series Union Bonnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures as high as 1,200°F (649°C). A non-rotating lower stem helps to extend packing life by removing rotation from the packing area. Stem packing below the threads isolates the thread lubricant from the flow, ensuring adequate lubrication regardless of the media. Union bonnet design ensures high integrity seal under severe service applications Packing below the power threads protects thread lubricants from media and isolates the lubricants from the...

U Series Needle Valves Flow Characteristics Dimensions / Flow Data 2.00 (50.8) 2.00 (50.8) Panel Hole Diameter: 0.65 (16.5) Max Panel Thickness: 0.42 (10.7) ( ) Denotes dimensions in millimeters Basic Part Number Inline 1/4" Compression A-LOK® 1/4" Female NPT 1/4" Socket Weld 1/4" Compression CPI™ 6mm Compression A-LOK® 6mm Compression CPI™ 8mm Compression A-LOK® 8mm Compression CPI™ Stem Type Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt * Tested in accordance with ISA S75.02. Gas flow will be choked when...

U Series Needle Valves Panel Hole Diameter: 0.83 (21.1) Max Panel Thickness: 0.61 (15.5) Max Open 4.24 (107.7) Min Close 3.90 (99.0) Panel Hole Diameter: 1.02 (25.9) Max Panel Thickness: 0.62 (15.7) ( ) Denotes dimensions in millimeters Stem Type Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt Regulating Blunt * Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT. † For CPI™ and A-LOK®, dimensions are measured...