video corpo cad

C Series
8Pages

{{requestButtons}}

Catalog excerpts

C Series - 1

3-D Drawings h Web Site Master Table of Contents Check Valves (C Series) Catalog 4130-C August 2005 3-D Drawings 3-D Master Site of ContentsDrawings Web Table Web Site

Open the catalog to page 1
C Series - 2

C Series Check Valves Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production and transmission, pharmaceutical, pulp and paper, power and utilities. Specifications Highly Fluorinated Fluorocarbon Rubber ► Resilient, custom molded, blow-out resistant seat design ► Back stopped poppet minimizes spring stress ► 100% factory tested for both crack and reseat ► Cracking pressures include: 1/3, 1,5, 10, 25, 50, 75, and 100 psi. ► Port connections include male and female NPT, CPI™, A-LOK®,...

Open the catalog to page 2
C Series - 3

C Series Check ValvesCrack and Re-seal Performance BCP means “Below Cracking Pressure” Cracking pressure is defined as the upstream pressure at which a detectable flow is measured. Re-seal pressure is defined as the downstream pressure at which the check valve closes bubble-tight. Example: For a valve with a spring having a rated cracking pressure of 25 psig (1.72 bar), the actual cracking pressure ranges between 20 and 30 psig (1.38 and 2.07 bar). The re-seal pressure range would be 16 to 20 psig (1.10 to 1.38 bar). Check valves having springs with rated crack pressures of 3 psig (0.21...

Open the catalog to page 3
C Series - 4

Flow Data/Dimensions Basic Part Number Flow Data Orifice Dimensions B C inch mm C xT% inch mm inch mm inch mm inch mm 1/8" A-LOK® Compression 1/8" Female NPT 1/8" Male SAE 1/8" Female SAE 1/8" Female BSP/ISO Tapered 1/8" Male BSP/ISO Tapered 1/8" Male NPT 1/8" Tube Adapter 1/8" CPITM Compression 3mm A-LOK® Compression 3mm CPI™ Compression 1/8" Male NPT 1/8" Male NPT 1/8" Male NPT 1/8" A-LOK® Compression 1/8" Female NPT 1/8" Male SAE 1/8" Female SAE 1/8" Female BSP/ISO Tapered 1/8" Male BSP/ISO Tapered 1/8" Male NPT 1/8" Tube Adapter 1/8" CPI™ Compression 3mm A-LOK® Compression 3mm...

Open the catalog to page 4
C Series - 5

C Series Check Valves Flow Data/Dimensions (continued) Model Shown: 4Z-C4L-1-SS Basic Part Number (Inlet) Port 1 (Outlet) Port 2 Flow Data Orifice inch mm C„ Dimensions B C xT% inch mm inch mm inch mm inch mm 1/2" A-LOK® Compression 1/2" Female NPT 1/2" Male SAE 1/2" Female SAE 1/2" Female BSP/ISO Tapered 1/2" Male BSP/ISO Tapered 1/2" Seal-Lok® 1/2" Male NPT 1/2" UltraSeal 1/2" Tube Adapter 1/2" VacuSeal 1/2" CPI™ Compression 12mm A-LOK® Compression 12mm CPITM Compression 1/2" Male NPT 1/2" Male NPT 1/2" Male NPT 1/2" A-LOK® Compression 1/2" Female NPT 1/2" Male SAE 1/2" Female...

Open the catalog to page 5
C Series - 6

C Series Check Valves How to Order The correct part number is easily derived from the following sequence. The six product characteristics required are coded as shown below. *Note: If the inlet and outlet ports are the same, eliminate the outlet port designator. Crack Pressure Blank -Fluorocarbon Rubber BN -Nitrile EPR -Ethylene Propylene Rubber NE -Neoprene Rubber *T -PTFE **KZ -Highly Fluorinated Fluorocarbon Rubber * Only available with stainless steel valves. ** Not available on C2 series. Describes a C Series Check Valve with 3/4" CPI™ compression inlet and outlet ports, a 5 psi...

Open the catalog to page 6
C Series - 7

C Series Check Valves Available End Connections L -SAE J1453, Fitting – O-ring face seal – External thread with O-ring groove designed to seal with an elastomer against a sleeve A -Two ferrule A-LOK ® compression port M -ANSI/ASME B1.20.1 External pipe threads TA -Tube adapter connection Z -Single ferrule CPITM compression port Q -UltraSeal face seal port F5 -SAE J1926/2, Part 2: Heavy-duty (S Series) stud ends KF -British Standard BS 21 (ISO 7-1), Internal pipe threads F -ANSI/ASME B1.20.1 Internal pipe threads V -VacuSeal face seal port G5 -SAE J1926/1, Part 1: Threaded port with O-ring...

Open the catalog to page 7
C Series - 8

3-D Drawings h Web Site Master Table of Contents Parker Hannifin Corporation Instrumentation Products Division 2651 Alabama Highway 21 North Jacksonville, AL 36265-9681 USA Phone: (256) 435-2130 Fax: (256) 435-7718 www.parker.com/ipdus Parker Hannifin plc Instrumentation Products Division Riverside Road Pottington Business Park Barnstaple, Devon EX31 1NP England Phone: +44 (0) 1271 313131 Fax: +44 (0) 1271 373636 Email: ipd@parker.com www.parker.com/ipd 3-D Drawings 3-D Master Site of ContentsDrawings Web Table Web Site

Open the catalog to page 8

All Parker Hannifin France SAS catalogs and technical brochures

  1. Compact EHA

    8 Pages

  2. Needle Valves

    56 Pages

  3. CCIM

    20 Pages

  4. RH series

    6 Pages

  5. SN6 Series

    4 Pages

  6. AC890PX

    36 Pages

  7. Multiline

    32 Pages