video corpo cad

Ball Valves - B Series
12Pages

{{requestButtons}}

Catalog excerpts

Ball Valves - B Series - 1

3-D Drawings h Web Site Master Table of Contents Ball Valves (B Series) Catalog 4121-B January 2006 3-D Drawings 3-D Drawings Master Site of Contents Web Site Web Table

Open the catalog to page 1
Ball Valves - B Series - 2

B Series Ball Valves Pressure vs. Temperature Legend: A - PEEK Seats; B - PCTFE Seats; C - Selector Valves; D - Brass Valves; E - PTFE Seats Note: To determine MPa, multiply bar by 0.1 Ethylene Propylene Rubber:... -65°F to 300°F (-54°C to 149°c) bar) Inlet Pressure Three-Way Flow Calculations with 1000 psig (69Two-Way Valve WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and...

Open the catalog to page 2
Ball Valves - B Series - 3

Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn on-off control of fluids utilized in process and instrumentation applications. A broad selection of valve body, seat, and seal materials provide a wide range of pressures and temperatures at which the valve may be used. Features ► Free floating ball design provides seat wear compensation. ► Available in 316 stainless steel and brass construction. Alloy N24135 and Alloy N30002 construction available upon request. ► Micro-finished ball...

Open the catalog to page 3
Ball Valves - B Series - 4

Dimensions & Flow Data Model Shown: 4A-B6LJ-SSP Port Size Flow Data Basic Orifice Part # Inch mm Cv End Connections Port 1 Port 2 Dimensions Inches (mm) D E * Tested in accordance with ISA S75.02. Gas flow will be choked when P1- P2 / P1= xT. t For CPI™ and A-LOK®, dimensions are measured with nuts in the finger tight position Master Table of Contents Parker Hannifin Corporation Instrumentation Products Division Jacksonville, AL USA http://www.parker.com/ipdus_

Open the catalog to page 4
Ball Valves - B Series - 5

Three-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated three-way B Series Ball Valves may be used as diverting or selecting valves for fluids utilized in process and instrumentation applications. The standard three-way diverter valve is designed to accept media through the bottom port and direct it out of two outlet ports. When equipped with spring-loaded seats, the three-way valve may be used as a selector valve, alternately accepting media from either of two inlet sources (side ports) and directing it through a single outlet (bottom port)....

Open the catalog to page 5
Ball Valves - B Series - 6

Diverter Valve Selector Valve Model Shown: 4F-B6XJ-SSP * Wetted Parts. ** Optional stem seal and body seal materials are described in the How to Order section. Lubrication: Perfluorinated polyether. ***The lower stem washer material is PEEK for B8 Selector Valves. Lubrication: Perfluorinated polyether. Master Table of Contents Parker Hannifin Corporation Instrumentation Products Division Jacksonville, AL USA httir//www narker com/indus_

Open the catalog to page 6
Ball Valves - B Series - 7

Three-Way B Series Ball ValvesDimensions & Flow Data Model Shown 4Z-B6XSPKR- V- * Tested in accordance with ISA S75.02. Gas flow will be choked when P1- P2 / P1= xT. f For CPI™ and A-LOK®, dimensions are measured with nuts in the finger tight position Master Table of Contents Parker Hannifin Corporation Instrumentation Products Division Jacksonville, AL USA http://www.parker.com/ipdus_

Open the catalog to page 7
Ball Valves - B Series - 8

How to Order Model Shown: 6A-B6LJ2-SSP Valve Series Seat Material Seal Material Body Material S2 Spring-Loaded PCTFE PKR PTFE Lubricated PEEK SPKR Spring-Loaded PTFE Lubricated PEEK (Blank) PTFE V Fluorocarbon Rubber EPR Ethylene Propylene Rubber BN Nitrile Rubber KZ Highly Florinated Fluorocarbon Rubber LT Live-Loaded PTFE Packing with PTFE Seals VLT Live-Loaded PTFE Packing with Fluorocarbon Rubber Seals EPRLT Live-Loaded PTFE Packing with Ethylene Propylene Rubber Seals BNLT Live-Loaded PTFE Packing with Nitrile Rubber Seals KZLT Live-Loaded PTFE Packing with Highly Florinated...

Open the catalog to page 8
Ball Valves - B Series - 9

B Series Ball ValvesHow to Order (Continued)Examples: Two-Way Valves Describes a B8L ball valve with a 1/2" A-LOK® end connections for ports 1 and 2, PTFE seats, Nitrile rubber stem and body seals, stainless steel construction, with a panel mounting nut. *Note: If ports 1 and 2 are the same, eliminate the port 2 designator. Describes a B2L ball valve with 3mm A-LOK® end connections for ports 1 and 2, PCTFE seats, fluorocarbon rubber body seals, live-loaded PTFE packing, stainless steel construction, with a panel mounting nut. *Note: If ports 1 and 2 are the same, eliminate the port 2...

Open the catalog to page 9
Ball Valves - B Series - 10

B Series Ball Valves Round Handle Lock-Out Handle Actuator Options Double Acting (61AD) Pneumatic Actuator Spring Returns (61AC & AO) Pneumatic Actuator O-Ring Stem Seals 70 and 80 Series Electric Actuator Live-Loaded Stem Seals Two-Way Valve Upstream and Downstream Drain Options For draining upstream or downstream media on two-way valves at pressures below 150 psig (10 bar), add the suffix –VBU (Vented Ball Upstream) or –VBD (Vented Ball Downstream). Example: 4Z-B6LJ-SSP-VBU. This option is also suitable to vent the ball cavity in vacuum applications. For pressures up to 3,000 psig (207...

Open the catalog to page 10
Ball Valves - B Series - 11

B Series Ball Valves Lock-Out Devices: Add the suffix LD to the end of the part number to order directly on the valve. For field installation, simply substitute the correct valve series number after LD. Colored Lever Handles: Add the designator corresponding to the correct handle as a suffix to the part number (black is standard). W = white, B = blue, G = green, R = red, Y = yellow. Colored Round Handles: Add the designator corresponding to the correct handle as a suffix to the part number. S = Black, S-W = white, S-B = blue, S-G = green, S-R = red, S-Y = yellow. NOTE: Round handles are not...

Open the catalog to page 11
Ball Valves - B Series - 12

3-D Drawings h Web Site Master Table of Contents Parker Hannifin Corporation Instrumentation Products Division 2651 Alabama Highway 21 North Jacksonville, AL 36265-9681 USA Phone: (256) 435-2130 Fax: (256) 435-7718 www.parker.com/ipdus Parker Hannifin plc Instrumentation Products Division Riverside Road Pottington Business Park Barnstaple, Devon EX31 1NP England Phone: +44 (0) 1271 313131 Fax: +44 (0) 1271 373636 Email: ipd@parker.com www.parker.com/ipd 3-D Drawings 3-D Drawings Master Site of Contents Web Site Web Table

Open the catalog to page 12

All Parker Hannifin France SAS catalogs and technical brochures

  1. Compact EHA

    8 Pages

  2. Needle Valves

    56 Pages

  3. CCIM

    20 Pages

  4. RH series

    6 Pages

  5. C Series

    8 Pages

  6. SN6 Series

    4 Pages

  7. AC890PX

    36 Pages

  8. Multiline

    32 Pages