Regenerative CO2 Reduction System

Regenerative CO2 Reduction System

Regenerative CO2 Reduction System

Product catalog summary
Overview: The document describes the regenerative CO2 reduction system by Parker domnick hunter, designed to provide continuous high-quality diving or emergency breathing air by reducing CO2 levels in contaminated air on submarines.
Specifications:
  • The system reduces CO2 from 10,000ppm to less than 500ppm.
  • It includes a five-stage filtration process and an integral detection system for monitoring air quality.
  • Exceeds Royal Navy performance, shock, and EMC test requirements.
  • Dimensions: Height 1420mm, Width 670mm, Depth 625mm, Weight 365kg.
  • Delivered air quality includes particulate removal down to 1 micron and maximum oil content of 0.003 mg/m3.
  • Normal operation flow rate is 23m3/hr at 276 bar g.
Benefits:
  • Continuous supply of high-quality breathing air.
  • Fully automatic regenerative operation with PLC controls.
  • Compact, modular design that is easy to install and maintain.
  • Corrosion protection and 30G shock tested.
Technical Data:
  • Maximum operating pressure: 276 bar g.
  • Voltage: 115Vac 50/60Hz (230 Vac optional).
  • Materials include EN24 steel for adsorption column and 316 stainless steel for filter vessels.
Operation Stages:
  1. Stage 1: High-efficiency water separator removes bulk contamination.
  2. Stage 2: Coalescing filter removes oil/water aerosols and dirt particulates.
  3. Stage 3: Regenerative CO2 reduction using pressure/temperature swing adsorption.
  4. Stage 4: Activated carbon/catalyst element removes oil vapour and hydrocarbon odours.
  5. Stage 5: Final filter removes any remaining particulates.
Contact Information: Parker Hannifin Ltd, domnick hunter Industrial division, Gateshead, England. Tel: +44 (0)191 402 9000, Email: [email protected]
See more

Catalog excerpts

Regenerative CO2 Reduction System-1

Regenerative CO2 Reduction System Continuous high quality diving or emergency breathing air During extended periods of operation, the living and working environment on a submarine can become contaminated with excessive amounts of carbon dioxide, exhaled during personnel respiration. Compressing this contaminated air to fill diving bottles can consequently pose a serious problem for naval divers. The regenerative CO2 reduction system from Parker domnick hunter can provide a continuous supply of high quality diving or emergency breathing air from a high pressure compressed air supply. The five stage filtration process can reduce CO2 levels from 10,000ppm (1%) to a safe level of less than 500ppm (0.05%). Various safety features and overrides provide total security and protection, while an integral detection system is fitted as standard to monitor inlet and outlet air quality. The system exceeds Royal Navy performance, shock and EMC test requirements and has been in service with the Royal Navy since 2000. Contact Information: Parker Hannifin Ltd domnick hunter Industrial division Dukesway, Team Valley Trading Estate Gateshead, Tyne and Wear England NE11 0PZ Tel: +44 (0)191 402 9000 Fax: +44 (0)191 482 1714 Email: [email protected] www.domnickhunter.com Benefits: • Continuous supply of high quality breathing air • Fully automatic regenerative operation • Integral CO2 detection system as standard • Pressure/Temperature Swing Adsorption technology • High efficiency inlet and outlet filtration • PLC controls as standard • Fully corrosion protected inside and out • 30G shock tested • Compact modular design • Easy to install and maintain • Proven and in-service ENGINEERING YOUR SUCCESS.

 Open the catalog to page 1
Regenerative CO2 Reduction System-2

Weights and Dimensions Height Width Depth Weight mm ins mm ins mm ins kg lbs 1420 55.9 670 26.4 625 24.6 365 803 Technical Data Delivered Air Quality Particulate removal down to 1 micron Maximum remaining oil content 0.003 mg/m3 (0.003ppm/wt) Dewpoint better than -64°C (-84°F) adp @ 1 bar g CO2 levels (av.) < 500ppm (with max 10,000ppm (inlet) CO levels <5ppm Normal Operation Flowrate @ 276 bar g (outlet) 23m3/hr (14cfm) Maximum operating pressure 276 bar g (4000 psi g) Inlet/outlet connections 3/8” BSPP female Voltage 115Vac 50/60Hz (230 Vac optional) Mean loads 350 Watts OUTLET 3/8” BSPP INTLET...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.