Catalogs >
Parker Gas Separation and Filtration Division EMEA >
Breathing Air Purity Test Kit

Breathing Air Purity Test Kit
2Pages

Catalog excerpts

ENGINEERING YOUR SUCCESS. The Parker domnick hunter Breathing Air Purity Test Kit (APTK1) allows for a convenient ‘on the spot’ indication of compressed air quality. This comprehensive test kit is compact, easy to operate and can be used to indicate the level of contamination both upstream and downstream of purification equipment. It is supplied complete with oil mist, water vapour CO and CO2 test tubes to allow immediate multiple testing. In addition to the detection of compressed air contaminants listed above, the APTK1 also features an Oxygen Analyser allowing for constant real-time display of the oxygen content within the compressed air system. The APTK1 is not only suitable for industrial compressed air testing but also, the additional O2 analysing feature enables compressed air lines that supply Breathing Air/ Respiratory Protection Equipment (RPE) to be tested to the latest national and international standards. Contact Information: Parker Hannifin Ltd domnick hunter Industrial division Dukesway, Team Valley Trading Estate Gateshead, Tyne and Wear England NE11 0PZ Tel: +44 (0)191 402 9000 Fax: +44 (0)191 482 6296 Email: dhindsales@parker.com www.domnickhunter.com Air Content Measurables: • Oxygen • CO • CO2 • Water Vapour • Mineral Oil Benefits: • Lightweight and portable kit in a robust carry case • Digital oxygen content monitoring • Allows simultaneous testing of upstream and downstream air purity • Testing quality of breathing air to national and international Standards • Can be used with compressed air pressures up to 10 bar g (145 psi g) • Factory set for use with ‘Gastec Ltd’ detection tubes Breathing Air Purity Test Kit

Open the catalog to page 1

Catalogue: 17 400 4436 03/09 Rev. 00 ©2009 Parker Hannifin Corporation. All rights reserved. ENGINEERING YOUR SUCCESS. Technical Data Air Purity Test Kit Maximum inlet pressure: 10 bar g (145 psi g) Analysis operating pressure: 3 bar g (43.5 psi g) - Factory set Maximum inlet temperature: 40¢ªC (104¢ªF) Minimum inlet temperature: 15¢ªC (59¢ªF) Flow accuracy: ±4% outlet Air flow rate range at outlet: 30 - 2500 cc/min Hose connections: 6mm -14 " push in adaptor Approved detector tubes: Calibrated for: Gastec Ltd detector tubes Model Measurable Sample Rate Test Duration Total Volume APTK1 (60...

Open the catalog to page 2