SMH / SMB Series - Low Inertia Servo Motors
24Pages

SMH / SMB Series Low Inertia Servo Motors ENGINEERING YOUR SUCCESS.

WARNING — USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. • This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. • The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and...

Low Inertia Servo Motors - SMH / SMB

Global Product Design Parker Hannifin has more than 40 years experience in the design and manufacturing of drives, controls, motors and mechanical products. With dedicated global product development teams, Parker draws on industry-leading technological leadership and experience from engineering teams in Europe, North America and Asia. Local Application Expertise Parker has local engineering resources committed to adapting and applying our current products and technologies to best fit our customers’ needs. Manufacturing to Meet Our Customers’ Needs Parker is committed to meeting the...

Brushless servo motors SMH / SMB Overview Motor Type Description The SMH / SMB Series of highly-dynamic brushless servo motors have been design to combine the cutting-edge technology of Parker Hannifin products with an extremely high performance. Thanks to the innovative "salient pole" technology, the motor’s dimensions are considerably reduced with significant advantages in terms of specific torque, overall dimensions and dynamic performance. Compared to traditional-technology brushless servo motors, the specific torque is approximately 30 % higher, overall dimensions are considerably...

Brushless servo motors SMH / SMB Technical Characteristics Technical Characteristics Technical Data Data referred to motor mounted on a steel flange in horizontal position with resolver and without brake. Stall torques refer to motor turning at 100 min-1 Data measured at 20 °C. When "hot" consider -0.09 %/K derating

Brushless servo motors SMH / SMB Technical Characteristics (1) Data referred to motor mounted on a steel flange in horizontal position with resolver and without brake. Stall torques refer to motor turning at 100 min-1 (2) Data measured at 20 °C. When "hot" consider -0.09 %/K derating (3) Manufacturing tolerance data ±10 % STANDARDS In compliance with: 2006/95 EC • EN60034-1 • EN60034-5 • EN60034-5/A1 Marked C t Marked (except SM_40 and SM_170)

Brushless servo motors SMH / SMB Curves Speed Torque Curves SMH/B60 4500 min-1 230 V

Brushless servo motors SMH / SMB Curves

Brushless servo motors SMH / SMB Curves SMH/B142

Brushless servo motors SMH / SMB Dimensions LM: Motor’s length without brake and with resolver LB: Motor’s length with brake and resolver DxL: Shaft diameter x shaft lenght t1: Overall shaft height VxZ: Shaft hole depth 1 not available with flange 7 (2) only for torque <2 Nm

Brushless servo motors SMH / SMB Accessories and Options Options Parker SMH / SMB family motors are available with standard and custom options to adapt motor on your application. If the option for your application is not listed, please consult our technical department. Holding Brake All SMH / SMB motors are available with option holding brake. The fail-safe (supply voltage 24 VDC ±10 %) holding brake is incorporated in the motor at the opposite side of the front flange (SM_170 front side) and is applied when there is no voltage present. Because of the power loss caused by the brake, torque...

Brushless servo motors SMH / SMB Accessories and Options

Brushless servo motors SMH / SMB Accessories and Options EnDat Absolute Encoder Servofan kit Designed for the SMH/SMB servo motors family, the new Servofan kit allows extra performances over and above the specified motor torque rating. Brushless servo motors are meant for high dynamic applications and where the functionality is un-constant (S3 Cycle). In this conditions the new Servofan kit increases by 25% the motor torque and it also permits the use in continuos duty (S1) improving the performances. Suitable for 100-115, 142 and 170mm frames sizes within the SMB/SMH ranges, the kit is...

Brushless servo motors SMH / SMB Layout and Connectors 3M 3MB Y-Tech rotatable connector 2Y 2x Parallel upright connectors 2I 2x Forward facing connectors 2IB 2x Rear facing connectors 2ID Terminal box rear facing 3M Terminal box forward facing 3MB Hiperface DSL® Connector (IZ) Part number Part number Part number

Brushless servo motors SMH / SMB Layout and Connectors 1 U 2 V 3 GND - shield 4 Brake +24 VDC 5 Brake 0 VDC 6 W Part number CONMOT82F Female Connector Part number CONMOT2IZF Female Connector

Rated Speed [min-1] Stall Current [A] Brushless servo motors SMH / SMB Associated Drives

Brushless servo motors SMH / SMB Order Code SMH / SMB Empty field Shaft with Key S Shaft without key A1 Encoder 2000 ppr + Hall - TAMAGAWA OIH48 A2 Encoder 2048 ppr + Hall - TAMAGAWA OIH48 A3 Encoder 4096 ppr + Hall - TAMAGAWA OIH48 A6 SinCos Hiperface Encoder Single-Turn - STEGMANN SRS50/52 A7 SinCos Hiperface Encoder Multi-Turn - STEGMANN SRS50/52 B3 Encoder 2048 ppr + Hall - TAMAGAWA OIH35 B9 SinCos EnDat Encoder Multi-Turn - HEIDENHAIN EQI1331 C4 Encoder 5000 ppr + Hall - TAMAGAWA OIH48 C6 SinCos Hiperface Encoder Single-Turn - STEGMANN SKS36 C7 SinCos Hiperface Encoder Multi-Turn -...

Brushless servo motors SMH / SMB Order Code SMH / SMB

Brushless servo motors SMH / SMB Order Code for Cables for SMH / SMB Motors

Brushless servo motors SMH / SMB Order Code for Cables for SMH / SMB Motors

Parker's Motion & Control Technologies At Parker, we’re guided by a relentless drive to help our customers become more productive and achieve higher levels of profitability by engineering the best systems for their requirements. It means looking at customer applications from many angles to find new ways to create value. Whatever the motion and control technology need, Parker has the experience, breadth of product and global reach to consistently deliver. No company knows more about motion and control technology than Parker. For further info call 00800 27 27 5374 Aerospace Key Markets...