*mydirectindustry

Catalogs
Parker Cylinder Division Europe
Air Preparation Products P3N Series

Air Preparation Products P3N Series

Product catalog summary

Overview: This document is a technical catalog from Parker Hannifin Corporation's Pneumatic Division, detailing the P3N Series of air preparation products. It includes specifications, ordering information, and operating details for various filters, regulators, and combinations used in pneumatic systems.

1. Product Specifications:

Particulate Filters: Available in 3/4", 1", and 1-1/2" port sizes with options for twist or auto float drains. They feature metal bowls with sight gauges and are designed for high flow with low pressure drop.
Coalescing Filters: Similar port sizes and drain options as particulate filters, with Grade 6 elements for fine filtration. They are designed to remove aerosols and solid particles efficiently.
Regulators: Available with or without gauges, featuring self-relieving and balanced poppet designs for accurate pressure regulation. They support high flow rates and are available in multiple port sizes.
Pilot Controlled Regulators: Designed for high flow applications, these regulators are pilot-operated and available in similar port sizes as other products.

2. Material Specifications:

Components such as bodies and bowls are made from aluminum, while seals are nitrile. Sight gauges are made from polyamide (nylon).
Coalescing filter elements are made from borosilicate and felt glass fibers.

3. Operating Information:

Maximum supply pressure for most products is 250 psig, with operating temperatures ranging from 32°F to 175°F.
Flow capacities vary by product and port size, with particulate filters supporting up to 300 scfm and coalescing filters up to 140 scfm.

4. Ordering Information:

Products are identified by part numbers that specify port size, drain type, and other features.
Repair and service kits are available for maintenance, including elements, drain kits, and mounting brackets.

5. Flow Charts:

Flow characteristics are provided for different port sizes, illustrating pressure drop against flow rates.

6. Recommendations and Warnings:

Regulators should not be connected to bottled gas, and maximum pressure ratings should not be exceeded to avoid product rupture.
For best performance, regulated pressure should be set by increasing to the desired setting.

Introduction: This document provides guidelines for the installation, use, and maintenance of Pneumatic Division products, including valves, FRLs (Filters, Pressure Regulators, and Lubricators), vacuum products, and related accessories. It emphasizes the importance of designing systems in a fail-safe mode to prevent danger in case of product failure.

International Standards: Reference is made to ISO 4414:1998 for general rules relating to pneumatic fluid power systems. Users are encouraged to consult this standard for comprehensive guidance.

User Responsibility: Users are responsible for selecting appropriate products, ensuring compliance with performance and safety requirements, and adhering to all relevant standards and warning labels. The document stresses that Parker and its distributors do not guarantee product suitability for specific applications.

Product Selection Instructions: Key considerations for product selection include flow rate, pressure and temperature ratings, environmental conditions, and chemical compatibility. Users are advised to avoid exceeding product ratings and to consider the impact of environmental factors on product integrity.

Assembly and Installation Instructions: Before installation, components should be inspected for conformity. Installation must follow Parker's published instructions, and air supply should be moisture-free if temperatures can drop below freezing.

Maintenance and Replacement Instructions: A maintenance program is essential to ensure product longevity and safety. This includes regular inspections, adherence to lockout/tagout procedures, and establishing service intervals based on performance history and standards. Users must ensure proper servicing to avoid unpredictable system behavior.

Offer of Sale: The document outlines terms and conditions for the sale of products by Parker-Hannifin Corporation, including definitions, pricing, shipment, warranty, and disclaimers. It specifies that all sales are governed by these terms, and modifications require written agreement from an authorized representative.

Claims and Inspection: Buyers must inspect products upon receipt and report shortages within 10 days. Breach of warranty claims must be reported within 30 days of discovery. Legal actions must commence within 12 months of the alleged breach.

Limitation of Liability: Seller may repair, replace, or refund non-conforming products. Seller is not liable for special, indirect, incidental, or consequential damages. Liability is capped at the purchase price.

Buyer's Property: Seller may destroy obsolete buyer property after two years without orders. Seller is not liable for loss or damage to buyer's property.

Special Tooling: Special tooling remains Seller's property. Buyer has no interest in tooling, even if adapted for manufacturing.

Security Interest: Seller retains a security interest in delivered products to secure payment.

User Responsibility: Buyer is responsible for product selection and ensuring compliance with performance and safety standards.

Indemnity: Buyer must comply with Seller's instructions and indemnify Seller against claims arising from misuse or non-compliance.

Cancellations and Changes: Orders cannot be canceled or modified without Seller's consent. Seller may change product features and availability.

Assignment Limitation: Buyer cannot assign rights or obligations without Seller's consent.

Force Majeure: Seller is not liable for delays or failures due to uncontrollable events.

Waiver and Severability: Failure to enforce terms does not invalidate them. Invalid provisions do not affect the validity of others.

Termination: Seller may terminate agreements with 30 days' notice or immediately for specific breaches by Buyer.

Software Ownership: Seller retains ownership of software, granting Buyer a limited license.

Intellectual Property Indemnity: Seller will defend against claims of infringement, with conditions. Seller's liability is limited to specific remedies.

Governing Law: Ohio law governs the terms, with disputes resolved in Cuyahoga County, Ohio.

Entire Agreement: These terms and any quote form the complete agreement, overriding prior agreements.

Compliance with Laws: Buyer must comply with applicable laws and indemnify Seller against violations.

Catalog excerpts

Air Preparation Products Contents - www.parker.com/pneu/frl Parker Pneumatic Air Preparation Products P3N Series P3NF Particulate Filters P3NR Pilot Controlled Regulators G1 For inventory, lead time, and kit lookup, visit www.pdnplu.com Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics

Open the catalog to page 1

Air Preparation Products P3N Products Hi-Flow Particulate Filters P3NF Particulate Filters – Hi-Flow • Port blocks (PB) available to provide 1-1/2" port extension to 1" ported bodies • Excellent water removal efﬁciency • Metal bowl with sight gauge • Large ﬁlter element surface guarantees low pressure drop and increased element life • Twist drain as standard, optional auto ﬂoat drain • 3/4", 1", 1-1/2" port, NPT & BSPP Twist Drain Automatic Drain Operating information Port size Part number Metal bowl, sight gauge, twist drain Metal bowl, sight gauge, auto ﬂoat drain Metal bowl, sight gauge, twist...

Open the catalog to page 2

Air Preparation Products P3N Products Hi-Flow Particulate Filters Flow Charts Material Specifications Deﬂector Adsorber (optional) Activated charcoal P3NF 3/4" Particulate Filter Primary Pressure - bar 2.4 bar 6.2 bar 10.3 bar Primary Pressure - psig 35 psig 90 psig 150 psig Sight gauge Polyamide (nylon) Repair and Service Kits Pressure Drop - (psig) Flow Characteristics P3NF 3/4 Inch Ports Metal bowl / sight gauge / twist drain Automatic ﬂoat drain Twist drain Adsorber element P3NF 1" & 1-1/2" Particulate Filter Primary Pressure - bar 2.4 bar 6.2 bar 10.3 bar Primary Pressure - psig 35 psig...

Open the catalog to page 3

Air Preparation Products P3N Products Hi-Flow Coalescing Filters P3NF Coalescing Filters – Hi-Flow • Port blocks (PB) available to provide 1-1/2" port extension to 1" ported bodies • Metal bowl with sight gauge • Large ﬁlter element surface guarantees low pressure drop and increased element life • Twist Drain as standard, optional automatic ﬂoat drain • 3/4", 1", 1-1/2" # ports (NPT, BSPP) Port size Part number Metal bowl, sight gauge, twist drain Metal bowl, sight gauge, auto ﬂoat drain Metal bowl, sight gauge, twist drain Metal bowl, sight gauge, auto ﬂoat drain Metal bowl, sight gauge, twist...

Open the catalog to page 4

Air Preparation Products P3N Products Hi-Flow Coalescing Filters Flow Charts Material Specifications Body, bowl Borosilicate & felt glass ﬁbers Largest aerosol particle passed (Grade 6) Primary Pressure - bar 2.4 bar 6.2 bar 10.3 bar Primary Pressure - psig 35 psig 90 psig 150 psig Polyamide (nylon) Repair and Service Kits Metal bowl / sight gauge / automatic ﬂoat drain Metal bowl / sight gauge / twist drain Automatic ﬂoat drain kit Grade 6 element (standard) Flow Characteristics P3NF 3/4 Inch Ports P3NF 1" & 1-1/2" Coalescing Filter Primary Pressure - bar 2.4 bar 6.2 bar 10.3 bar Primary Pressure...

Open the catalog to page 5

Air Preparation Products P3N Products Hi-Flow Regulators P3NR Regulators – Hi-Flow • Port blocks (PB) available to provide 1-1/2" port extension to 1" ported bodies • Self relieving feature plus balanced poppet provides quick response and accurate pressure regulation • Solid control piston for extended life • 3/4", 1", 1-1/2" ports (NPT, BSPP) Operating information P3N Products Port size Part number Operating temperature: Without gauge Flow capacity†: High ﬂow Without gauge Without gauge Gauge ports (2): Weight: † 1" port body with 1-1/2" port block. NOTE: 2.0 Dia. (51 mm) hole required for panel...

Open the catalog to page 6

Air Preparation Products P3N Products Hi-Flow Regulators Flow Charts Material Specifications Body P3NR 3/4" Regulator Relief And Flow Characteristics 8 Poppet assembly Springs, poppet & control Repair and Service Kits 2" dial face 60 psig (0 to 4.1 bar), gauge 2" dial face 160 psig (0 to 11.0 bar), gauge 2" dial face 300 psig (0 to 20.7 bar), gauge 1-3/4" digital round face 160 psig (0 70 11.0 bar), gauge P3NR 1" & 1-1/2" Regulator Relief And Flow Characteristics * If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. 1 & 1-1/2 Inch Ports Primary Pressure 100 psig (6.9 bar) Pressure Drop -...

Open the catalog to page 7

Air Preparation Products P3N Products Hi-Flow Pilot Controlled Regulators P3NR Pilot Controlled Regulator - Hi-Flow • Port blocks (PB) available to provide 1-1/2" port extension to 1" ported bodies • Self relieving feature plus balanced poppet provides quick response and accurate pressure regulation • Solid control piston for extended life • 3/4", 1" 1-1/2" ports (NPT, BSPP) Operating information Port size Part number Without gauge Operating temperature: Without gauge Without gauge Flow capacity†: High ﬂow 1" port body with 1-1/2" port block. Gauge ports (2): Weight: scfm = Standard cubic feet...

Open the catalog to page 8

Hi-Flow Pilot Controlled Regulators Air Preparation Products P3N Products Material Specifications Flow Charts Adjusting stem Poppet assembly Springs – poppet Repair and Service Kits 2" dial face 60 psig (0 to 4.1 bar), gauge 2" dial face 160 psig (0 to 11.0 bar), gauge 2" dial face 300 psig (0 to 20.7 bar), gauge 3/4 Inch Ports Primary Pressure 100 psig (6.9 bar) Pressure Drop - (psig) Relief And Flow Characteristics 120 1-3/4" digital round face 160 psig (0 70 11.0 bar), gauge P3NR 1" & 1-1/2" Regulator Relief And Flow Characteristics P3NR 1 & 1-1/2 Inch Ports Primary Pressure 100 psig (6.9...

Open the catalog to page 9

Air Preparation Products P3N Products Hi-Flow Filter / Regulators P3NE Filter / Regulator – Hi-Flow • Port blocks (PB) available to provide 1-1/2" port extension to 1" ported bodies • Excellent water removal efﬁciency • Metal bowl with sight gauge • Large ﬁlter element surface guarantees low pressure drop and increased element life • Twist drain as standard, optional auto drain • Self relieving feature plus balanced poppet provides quick response and accurate pressure regulation • Solid control piston for extended life • 3/4", 1", 1-1/2" # ports (NPT, BSPP) Operating information Supply pressure...

Open the catalog to page 10

Air Preparation Products P3N Series

Air Preparation Products P3N Series

Catalog excerpts

All Parker Cylinder Division Europe catalogs and technical brochures