Metal Seals
16Pages

Metal-Jacketed Gaskets1Corrugated Gaskets4 Flat Metal Gaskets5 Resilient Metal Seals6 Corrosion Resistance of Gasket Metals7Bolting Data for Standard Flanges9 Design Work Sheet & Quote Form10 > If you need assistance or information in ordering anyParker metal gasket, contact: > Copyright 1998, Parker Hannifin Corporation, Cleveland, OH., All Rights Reserved Parker Hannifin Corporation San Diego, CA. O-Seal Division >

STYLE P-920 (Single Jacketed) The Style P-920 Gasket is recommended for relatively narrow applications. Constructed by encasing the softfiller material on one face and both edges, this style iswell suited for narrow-faced closures because the width/ diameter limitations do not apply. Circular and non-circular shapes can be supplied inthis style and at a lower cost than frenchӔ type gaskets.NOTE: Specification MS35769 (AN-900) is available inmost sizes. For gasket widths over 1/4", Parker Style P- 923 Double-Jacketed Gaskets are suggested. Standard thickness available is 3/32". STYLE P-920...

STYLE P-931 & P-932 (French Type) These are modifications of the basic Style P-930. Thetwo-piece construction of the P-931 and the three-piece construction of the P-932 are recommended for wide or irregular shapes such as cylinder heads and odd- shaped valve bonnets not requiring protection of the filler material or additional flange support at the outeredge. STYLE P-933 (French Type) Parker Style P-933 Gaskets are designed expressly for use with glass-lined equipment or lightly bolted flanges. Style P-933 construction consists of a thick wovenParmite filler with a one-piece metal jacket...

Parker Corrugated Gaskets areavailable in non-standard sizes or irregular shapes. Byproper material selection, this type of gasket can beused at almost any temperature in low pressure applica-tions. > Parker Corrugated Gas-kets are recommended for use in valve bonnet joints,fuel and combustion line connections for aircraft gas turbines, steam chests, high-temperature exhaust ducts and glass-lined equipment. This type of gasket is bestsuited for smooth-faced, complex circular or non-circularshapes at low pressure to 500 psi. The pressure rangemay be extended to 1000 psi and used on rougher...

Parker Flat Metal Gaskets arerelatively inexpensive to produce and deliver goodsealing performance in a variety of applications over a wide temperature range. The machined styles, with reduced surface may be the only answer to high- pressure, high-temperature situations or corrosiveapplications in flanges where available bolting forcesare too light to accommodate the style P-940 typegasket. > Parker Style P-941 Profile Gaskets combine the desir-able qualities of solid metal gaskets with the advantages of reduced area of contact (less bolting force required) provided by the VӔ shaped ribbed...

Parker S-Shape and Omega MetalSeals are high performance, resilient metal sealsintended for separable joint type applications requiringresistance to temperature and pressure extremes,resistance to corrosive fluids, zero leakage and excep- tionally long life. The Parker S-Shape Metal Seal features low seatingload, high resilience. They are self energizing andpressure assisted. Parker S-Shape Metal Seals arereusable and require a very simple cavity design, > The ParkerO-Seal Division also produces two additional types ofresilient metal seals for use in super-critical sealing of nuclear,...

Drawing No. Rev: > DONOTREMOVE...PLEASEPHOTOCOPY APPROVED SOURCE:PARKER HANNIFIN CORP. O-SEAL DIVISION7664 PANASONIC WAYSAN DIEGO, CA 92173 TELEPHONE: 310 204-3000 FAX: 310 841-4249 Material:Drawn By:Scale: Tolerances - Except as Noted:Checked By: Date: Decimals .XX Angles .XXX ѱ Company:TITLE:Drawing No. Rev: 11 Parker Hannifin Corporation O-Seal Division San Diego, CA. >

THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKESNO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUTNOT LIMITED TO, MERCHANT ABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESSED, IMPLIED, OR ARISING BY OPERATION OFLAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NOWARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYERS DESIGNS OR SPECIFICATIONS.Limitation Of Remedy: SELLERҒS LIABILITY ARISING FROM OR IN...

The items described in this document are hereby offered for sale at prices to beestablished lay Parker Hannifin Corporation, Its subsidiaries and its authorizeddistributors. Thin offer and its acceptance by any customer (BuyerӔ) shall begoverned by all of the following Terms and Conditions. Buyers order for any itemdescribed in its document, when communicated to Parker Hannifin Corporation, itssubsidiary or an authorized distributor (ғ Seller) verbally or In writing, shall constituteacceptance of this offer. > A tooling charge may be imposed for any special tooling,including without...

Parker Hannifin Corporation O-Seal Division7664 Panasonic WaySan Diego, CA 92173Phone: (619) 661-7000Fax: (619)671-3202 Print Code: CDR >