*mydirectindustry

Catalogs
Parker Chomerics Division
Electronic, Electric, Analog and IO-Link

Electronic, Electric, Analog and IO-Link

Product catalog summary

Overview
The P8S Series magnetic cylinder sensors by Parker Hannifin Corporation are designed for precise and contactless sensing of piston positions in cylinders. They are easy to mount and suitable for various applications, offering a good price-performance ratio. These sensors detect changes in magnetic fields to sense the position of a moving piston within pneumatic or hydraulic cylinders.

Product Specifications
The sensors are available in two main types: mechanically operated (reed sensors) and solid-state (electronic sensors). They can be directly inserted into the cylinder tube or mounted using brackets. Equipped with short-circuit and transient protection, they are suitable for high-frequency switching applications and operate in temperatures as low as -30°C. However, they are not compatible with high-temperature cylinders lacking magnetic pistons.

Technical Data
The sensors feature a square body design and can be installed in T-slots with a quarter-turn screw mechanism. They support various cylinder types, including profile with T-slot, S-slot, tie rods, and round cylinders. The sensors offer different output types (PNP, NPN, Reed) and switching frequencies, with enclosure ratings of IP67. They are compatible with supply voltages ranging from 5 to 230 V AC/DC, depending on the type.

Dimensions and Installation
The sensors have specific dimensions for different output types and can be installed directly in T-slots or with adapters in S-dovetail slots. Installation involves inserting the sensor straight into the slot and securing it with a quarter-turn screw.

Connection Types
The sensors offer various connection types, including PNP and NPN configurations, with options for normally open (NO) and normally closed (NC) outputs. They are available with M8 connectors or flying leads.

Ordering Information
The catalog provides detailed ordering information for different sensor configurations, including voltage, connection type, cable length, and part numbers. Options include NPN and PNP configurations with various cable lengths and materials (PUR or PVC), as well as Reed sensors with different voltage ranges and connection types.

Safety and Warnings
The document emphasizes the importance of proper selection and use of the products to prevent potential hazards such as death, personal injury, or property damage. Users are responsible for ensuring that all performance, safety, and warning requirements are met for their specific applications.

Product Overview
Parker's Continuous Position Sensors (CPS) offer precise, contactless position sensing for pneumatic actuators. They provide data via analog outputs or IO-Link, enhancing the functionality of pneumatic cylinders for applications like quality monitoring and process control. CPS sensors are easy to install in standard T-slots and adaptable to other cylinder types with adapters.

Technical Specifications

Sampling rate: 1 ms
Resolution: 0.03% full scale
Repeatability: 0.06% full scale
Linearity error: 0.3 mm
Operating temperature: -20 to +70 °C (PUR cable)
Enclosure rating: IP67
Supply voltage: 15 to 30 V DC
Output: Analog (0-10 V, 4-20 mA) or IO-Link

Installation and Connection
The CPS can be mounted directly in T-slots without additional hardware. It features a teach button for easy setup and can be controlled via IO-Link. The analog version uses an M8 connector, while the IO-Link version uses an M12 connector.

Ordering Information
Available in various sizes with measuring ranges from 32 mm to 256 mm. Part numbers vary based on configuration and connection type.

Accessories
Includes tie rods, T-slot adapters, and cable connectors. Cables are available in different lengths and materials, suitable for various sensor configurations.

Safety Guide
Emphasizes the importance of understanding safety information before using Parker's products. Users are responsible for ensuring that products meet specific design requirements and safety standards.

Specifications and Procedures

Wear and Maintenance: Cylinder wear is influenced by factors such as misalignment and improper servicing. Seal wear must be considered in cylinder applications.
Piston Rods: Failure can lead to high-speed ejection of the rod or load, fluid discharge, and unexpected movements. Proper selection and secure attachment are crucial to prevent buckling and failure.
Cushions: Recommended for applications with piston velocities over 4 inches/second to absorb energy effectively.
Cylinder Mountings: Different mounting configurations have specific limitations and requirements. Proper alignment and secure mounting are essential.
Port Fittings: Hydraulic cylinders with deceleration circuits may experience intensified pressure, requiring appropriate connector pressure ratings.

Installation and Mounting

Cleanliness: Ports are plugged to prevent contamination. Clean piping thoroughly before installation.
Environmental Protection: Shields are recommended in hazardous environments to protect components.
Alignment: Proper alignment of the piston rod is necessary to prevent wear.
Mounting Recommendations: Use high tensile alloy steel screws and ensure proper torque. Specific mounting types have additional requirements.

Maintenance and Troubleshooting

Storage: Store cylinders in a dry, clean environment, preferably vertically, to prevent corrosion and seal damage.
Leakage: External and internal leakages have specific causes and solutions, such as seal replacement and pressure adjustments.
Operational Issues: Address issues like low pressure, undersized cylinders, and misalignment to ensure proper function.
Modifications and Repairs: Modifications should be done by certified facilities. Disassembly for seal replacement must follow provided instructions.

Safety Guide

Failure of cylinder components can lead to uncontrolled movements and fluid escape, posing serious injury risks.

Terms and Conditions Overview

1. Acceptance of Terms: Buyer's order for products constitutes acceptance of these terms. Seller objects to any contrary terms from Buyer. Modifications require written agreement from Seller.

2. Price and Payment: Prices are valid for 30 days unless stated otherwise and exclude taxes. Payment is due 30 days from invoice date, with interest on late payments.

3. Shipment and Delivery: Delivery dates are approximate. Title and risk pass to Buyer upon shipment. Buyer is responsible for additional shipping charges due to their actions.

4. Warranty: Products are warranted against defects for 12 months or 2,000 hours. Services are warranted for 6 months. Software is warranted for 90 days. All other warranties are disclaimed.

5. Claims and Actions: Claims for shortages must be reported within 10 days. Breach of warranty claims must be made within 30 days of discovery. Legal actions must commence within 12 months of the event.

6. Limitation of Liability: Seller's liability is limited to repair, replacement, or refund. Seller is not liable for special, indirect, or consequential damages.

7. Loss to Buyer's Property: Seller is not responsible for loss or damage to Buyer's property after two years without orders.

8. Special Tooling: Special tooling remains Seller's property. Buyer has no interest in it, even if adapted for their use.

9. Security Interest: Seller retains a security interest in delivered products until payment is complete.

10. User Responsibility: Buyer is responsible for product selection and compliance with industry standards.

11. Use of Products and Indemnity: Buyer must comply with Seller's instructions. Unauthorized use is at Buyer's risk, and Buyer must indemnify Seller for related claims.

12. Cancellations and Changes: Orders cannot be canceled or modified without Seller's consent.

13. Limitation on Assignment: Buyer cannot assign rights or obligations without Seller's consent.

14. Force Majeure: Seller is not liable for delays due to events beyond control, such as natural disasters or government actions.

15. Waiver and Severability: Failure to enforce terms does not invalidate them. Invalid provisions do not affect the rest of the terms.

16. Termination: Seller can terminate agreements with 30 days' notice or immediately for specific breaches by Buyer.

17. Ownership of Software: Seller retains ownership of software, granting Buyer a limited license.

18. Indemnity for Intellectual Property Infringement: Seller will defend against claims of infringement, with conditions.

19. Governing Law: Terms are governed by Ohio law, with disputes resolved in Cuyahoga County, Ohio.

20. Entire Agreement: These terms and any quote form the entire agreement, superseding prior agreements.

21. Compliance with Laws: Buyer must comply with applicable laws and indemnify Seller for violations.

Catalog excerpts

Electronic, Electric, Analog and IO-Link-1

Electronic, Electric, Analog and lO-Link P8S Series Sensor Catalog 0981P ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Electronic, Electric, Analog and IO-Link-2

Pneumatic Actuator Products Warning, Offer of Sale Important Before carrying out service activities, make sure the air motor is vented. Before disassembling the motor, disconnect the primary air hose to ensure that the air supply is interrupted. Note All technical data in the catalog are typical values. The air quality is a major factor in the service life of the motor, see ISO 8573-1. FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker...

Open the catalog to page 2

Electronic, Electric, Analog and IO-Link-3

Pneumatic Actuator Products Parker Hannifin Corporation Pneumatic Division Wadsworth, Ohio www.parker.com/pneumatics

Open the catalog to page 3

Electronic, Electric, Analog and IO-Link-4

Pneumatic Actuator Products P8S Electronic and Reed Sensors The P8S Series magnetic cylinder sensor enables quick, precise and contactless sensing of the piston‘s position in cylinders. It is easy to mount, can be used in numerous applications and offers an outstanding price-performance ratio. Product Overview As the term magnetic switch suggests, these are operated by magnetic fields; another description widely used is magnetic “SENSOR”. As our eyes sense change of light, our ears sense the change of sound, magnetic sensors / switches sense the change of magnetic flux in pneumatic and hydraulic...

Open the catalog to page 4

Electronic, Electric, Analog and IO-Link-5

Pneumatic Actuator ProductsTechnical Data Square body design, insert straight in T-slot, screw 1/4 turn Wadsworth, Ohio www.parker.com/pneumatics

Open the catalog to page 5

Electronic, Electric, Analog and IO-Link-6

Pneumatic Actuator Products Dimensions Dimensions in mm (inch) Reed Output 5 to 230 V AC/DC 5.8 (0.23) 3.9 (0.15) 1 Position sensor element 1 Position sensor element 2 Indication LED 2 Indication LED 3 Retaining ribs Reed Output 5 to 120 V AC/DC Reed Output 5 to 30 V AC/DC 1 1 Position sensor element 2 Indication LED 3 Retaining ribs 1 Position sensor element 2 Retaining ribs 2 Fixing screw 3 Indication LED 4 Position of sensor element; short overrun distance: 2 mm; long overrun distance: 1.7 mm Installation Square body design, Insert straight in T-slot, screw 1/4 turn Schritt 2: Magnetschalter...

Open the catalog to page 6

Electronic, Electric, Analog and IO-Link-7

Pneumatic Actuator Products Connections Connection type and diagram PNP NO bk: black bu: blue Q: load M: Mass L+: Power Pin assignment, M8 with knurled nut Parker Hannifin Corporation Pneumatic Division Wadsworth, Ohio www.parker.com/pneumatics

Open the catalog to page 7

Electronic, Electric, Analog and IO-Link-8

Pneumatic Actuator Products Catalog 0981P Ordering Information (Revised January 3, 2020) NPN NORMALLY CLOSED VOLTAGE CONNECTION CABLE Part Number Note: -30 to +80 °C (PUR cable) I -30 to + 70 °C (PVC cable) I -25 to +80 °C (NAMUR 1GD I -20 to +50 °C (ATEX 3GD) All sensors come with an adapter for S-dovetail Parker type OSP grooves. * with an aluminium adapter 8 Parker Hannifin Corporation Pneumatic Division Wadsworth, Ohio www.parker.com/pneumatics

Open the catalog to page 8

Electronic, Electric, Analog and IO-Link-9

Pneumatic Actuator Products Product Overview P8S Continuous Position Sensors Many applications require more than just end of stroke sensing of an actuator, but traditional methods of continuous sensing are expensive to implement. Parker’s CPS (Continuous Position Sensor) enables quick, precise and contactless continuous position sensing of a magnetic piston. CPS sensors continuously supply data via analog outputs or IO-Link. Analog position sensors have a voltage output of 0 V ... 10 V as well as a current output of 4 mA ... 20 mA. CPS enables flexible machine concepts, making it possible to...

Open the catalog to page 9

Electronic, Electric, Analog and IO-Link-10

Pneumatic Actuator Products Technical Data Cylinder type: Installation: Measuring range: Housing length: Output Function: Analog output (voltage): Analog output (current): Teach-in: Enclosure rating: Supply Voltage: 2) Power consumption: 3) Max load resistance: 4) Min load resistance: 5) Protection class: Time delay before availability: Required magnetic field sensitivity: Resolution: 6) Linearity error: 7) Repeat accuracy: 8) Sampling rate: 9) Indication LED color: Reserve polarity protection: Short circuit protection: Ambient operating temperature range: Shock and vibration resistance: EMC:...

Open the catalog to page 10

Electronic, Electric, Analog and IO-Link-11

Pneumatic Actuator Products Catalog 0981P Dimensions, Ordering Information Dimensions in mm (inch) Part number L1 L2 1 L3 Analog IO-Link *L2 equal to the measuring range. Note: PUR cable with M12 (IO-Link) or M8 (Analog) male connector knurled nut, 4-pin, 0,3 meter length. Please consult for measuring range 96, 160 & 224 mm. IO Link version Analog version PUR 0.3 meter length with M12 male connector knurled nut, 4-pin PUR 0.3 meter length with M8 male connector knurled nut, 4-pin Ordering Information - Drop-in T-slot Configuration Output Measuring length option Part number Weight [g] For product...

Open the catalog to page 11

Electronic, Electric, Analog and IO-Link-12

Pneumatic Actuator Products Accessories Mountings and brackets For products series Part number Ambient temperature -30 to +80 °C All mountings can be moved on the cylinder body before screwing in place and then putting sensors in the slots. (Zinc diecast, zinc plated screws.) M3 1 Sensoradapter with T-slot  Fixing screw 2 Fixing screw Part number 1 Sensor adapter with T-Slot  Sensoradapter with T-slot Clamping ring in nickel silver, screw in stainless steel, sensor mounting zinc diecast 2 Fixing for cable < Ø 3.2 mm (0.126 inch)  Cylinderadapter 3 Fixing for cable < Ø 3.2 mm (0.126 inch) 3...

Open the catalog to page 12

Electronic, Electric, Analog and IO-Link-13

Pneumatic Actuator Products Male connectors for connecting cables Cable connectors for producting your own connecting cables. The conncectors can be quickly attached to the cable without special tools. Only the outer sheath of the cable is removed. The connectors are available for M8 screw connector and meet protection class IP65. Technical Data Operating voltage: max. 32 V AC/DC Opertaing current per contact: max. 4 A Connection cross section: 0.25... 0.5 mm2 (conductor diameter min 0.1 mm) Protection class: IP65 and IP67 when plugged and screwed down (EN 60529) Connector Weight [kg] Part number...

Open the catalog to page 13

Electronic, Electric, Analog and IO-Link-14

Pneumatic Actuator Products Technical Information Pneumatic sensor for Tie-Rods Cylinders An ideal solution where a direct pneumatic signal is wanted from a cylinder sensor to a pneumatic control system, for example. This could be a machine or device in which only compressed air is available, and an electricity supply to normal cylinder sensors would involve serious problems or considerable expense. Function: Non-contacting sensing of a pneumatic cylinder, triggering an output signal (conn. 2) from the integrated 3/2 NC valve, which is activated by a magnetic field or iron core and has a return...

Open the catalog to page 14

All Parker Chomerics Division catalogs and technical brochures

Archived catalogs

SPRINGMESH™ Highly Resilient EMI Mesh Gasket
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list