1. Catalogs
  2. Parker Chomerics Division
  3. CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant
video corpo

CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant

CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant

CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant

Product catalog summary
Description
CHO-BOND 1016 is a one-component, corrosion-resistant, electrically conductive RTV silicone sealant. It provides environmental sealing and EMI shielding, ideal for outdoor enclosures requiring both EMI shielding and galvanic corrosion resistance. It cures at room temperature in the presence of moisture, with rapid skin formation and full property development in one week. The sealant should be stored at or below 77°F (25°C).
Features
  • Excellent resistance to galvanic corrosion
  • Non-corrosive
  • Cures with moisture
  • No pressure needed during cure
  • Rapid skin formation
Application
For non-silicone surfaces, apply a thin layer of CHO-BOND 1086 primer, allowing it to dry for 15-30 minutes before applying the sealant. The sealant is available in 10-ounce and 2.5-ounce tubes.
Ordering Information
  • 10-ounce tube: Part Number 50-01-1016-0000
  • 2.5-ounce tube: Part Number 50-02-1016-0000
Warning – User Responsibility
Improper selection or use of the product can cause serious harm. Users must ensure all performance, safety, and warning requirements are met through their own analysis and testing.
Offer of Sale
The product is offered for sale by Parker-Hannifin Corporation and its subsidiaries or authorized distributors, governed by the terms available at the provided link.
Typical Properties
  • Binder: Silicone
  • Filler: Nickel-plated graphite
  • Mix Ratio: 1-part
  • Consistency: Medium paste
  • Specific Gravity: 2.2 +/- 0.25
  • Minimum Lap Shear Strength: 150 psi (1.04 MPa)
  • Hardness: 80
  • Maximum DC Volume Resistivity: 0.95 ohm-cm
  • Corrosion Resistance: 15 mg weight loss
  • Use Temperature: -49 to 257°F (-45 to 125°C)
  • Shielding Effectiveness: > 50 dB
  • Room Temperature Cure Time: 1 week
  • Working Life: 0.5 hr
  • Shelf Life: 9 months
  • Coverage: 1276 in²/lb (18.1 cm²/g) for 0.010” thickness
  • Recommended Thickness: 0.007 to 0.040 in (0.18 to 1.02 mm)
  • VOC: 0 g/l
See more

Catalog excerpts

CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant-1

Leader in EMI Shielding and Thermal Management CHO-BOND® 1016 North America• 77 Dragon Court, Woburn, MA 01888-4014 TEL +(1) 781-935-4850 FAX +(1) 781-933-4318 Europe• Marlow, Bucks, UK TEL +(44) 1628 404000 FAX +(44) 1628 404090 Asia Pacific • Hong Kong TEL +(852) 2 428 8008 FAX +(852) 2 423 8253 South America• São Paulo, Brazil TEL +(55) 11 3917 1099 FAX +(55) 11 3917 0817 www.chomerics.com CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant DESCRIPTION CHO-BOND 1016 sealant is an electrically conductive, one-component RTV silicone which provides both environmental sealing and EMI shielding. This sealant, filled with nickel-plated graphite particles, contains no acetic acid, and cures in the presence of moisture at room temperature. Skin formation takes only a few minutes and full property development takes one week. CHO-BOND 1016 sealant is ideal for outdoor enclosure applications where both EMI shielding and galvanic corrosion are requirements. This product should be stored at or below 77°F (25°C). FEATURES · Excellent resistance to galvanic corrosion · Non-corrosive sealant · Cures in the presence of moisture · Needs no pressure during cure (excellent as a fillet seal) · Rapid skin formation APPLICATION If CHO-BOND 1016 sealant is being applied to a nonsilicone surface, a very thin coating of CHO-BOND 1086 primer must first be applied with a clean cloth. Before applying CHO-BOND 1016 sealant, primer must be allowed to dry 15-30 minutes. (Note: Primer is included in CHO-BOND 1016 sealant package). CHO-BOND 1016 sealant is available in 10-ounce (0.3 kg) tubes. ORDERING INFORMATION PART NUMBER UNIT/SIZE 50-01-1016-0000 10 ounce tube (0.3 kg) 50-02-1016-0000 2.5 ounce tube (71 g)

 Open the catalog to page 1
CHO-BOND® 1016 One Component, Corrosion Resistant, Electrically Conductive Sealant-2

CHO-BOND® 1016 North America• 77 Dragon Court, Woburn, MA 01888-4014 TEL +(1) 781-935-4850 FAX +(1) 781-933-4318 Europe• Marlow, Bucks, UK TEL +(44) 1628 404000 FAX +(44) 1628 404090 Asia Pacific • Hong Kong TEL +(852) 2 428 8008 FAX +(852) 2 423 8253 South America• São Paulo, Brazil TEL +(55) 11 3917 1099 FAX +(55) 11 3917 0817 www.chomerics.com WARNING – USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation,...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.