Overview: The document provides comprehensive details about Chomerics' global sales offices, product offerings, and specific product details for CHO-BOND® 1016 and CHO-BOND® 1087 Primer. It focuses on EMI shielding and thermal management solutions, with contact information for regional offices and distributors worldwide.

Global Sales Offices: Contact details for Chomerics' sales offices are listed across the Americas, Europe, and Asia Pacific, including locations such as Woburn, MA (headquarters), Grantham, UK, and Hong Kong. Each entry includes telephone, fax numbers, and email addresses.

Product Offerings: Chomerics specializes in EMI shielding and thermal management products, including conductive elastomers, conductive foam gaskets, adhesives, sealants, RF absorbing materials, EMI shielding plastics, metal gaskets, foil laminates, and thermal management solutions like gap filler pads and thermal compounds.

CHO-BOND® 1016 Sealant: A one-component, corrosion-resistant, electrically conductive RTV silicone sealant providing environmental sealing and EMI shielding, ideal for outdoor applications. It features resistance to galvanic corrosion and rapid skin formation, requiring a primer for non-silicone surfaces.

CHO-BOND® 1087 Primer: Designed to enhance adhesion between silicone compounds and non-silicone substrates, this low viscosity, blue liquid should be applied in a thin coat and allowed to dry before applying silicone materials.

Technical Specifications: Detailed specifications for CHO-BOND® 1016 include binder type, filler material, mix ratio, specific gravity, hardness, volume resistivity, and recommended application thickness, along with curing time, working life, and shelf life.

Safety and Handling: Users are warned about potential risks of improper use, emphasizing the importance of following industry standards and conducting thorough analysis and testing. Storage recommendations for the primer are also provided.

CHO-BOND® 2165: A two-component polyurethane sealant filled with stabilized copper, designed for aerospace and military applications. It is resistant to aircraft fluids and corrosion, curing fully in less than 4 hours with a combination of room temperature and elevated temperature curing.

Application Instructions: Surfaces must be clean, dry, and oil-free. Mix Part A and Part B in a 100:7.021 ratio until homogeneous and apply immediately. Recommended cure is 7 days at room temperature or a combination of room temperature and elevated temperature curing.

CHO-BOND® 320: A non-conductive pressure-sensitive adhesive used to apply a PSA to conductive silicone sheet stock, with a shelf life of 6 months.

Application Instructions: Clean the sheet stock with isopropyl alcohol, apply a thin layer of CHO-BOND 320, and allow to dry for 20 minutes before applying a release liner.

CHO-BOND® 584-29: A two-component, highly conductive adhesive system combining epoxy's adhesive characteristics with silver's conductivity, suitable for microelectronics, circuit repair, and EMI shielding systems.

Application Instructions: Mix the epoxy and hardener using the syringe system, apply using a dispensing needle, and ensure bonding surfaces are clean.

CHO-BOND® 700 Series: Silver-filled epoxy adhesives designed for semiconductor and microelectronics packaging, offering excellent die shear strength and high thermal and electrical conductivities.

General Notice: Information is accurate to the best of the company's knowledge, but users should conduct their own tests to determine product suitability. Products are sold without warranty, and all risks are assumed by the user.

Product Disclaimer: Suggestions are provided without guarantee or responsibility. Users are advised to conduct their own tests to determine product suitability. The product is sold without warranty, except for standard quality, and all risks are assumed by the user.

CHO-BOND Adhesive Specifications: Detailed specifications for CHO-BOND Adhesive SV712 and SV713 include viscosity, thixotropic index, specific gravity, lap shear strength, die shear strength, volume resistivity, glass transition temperature, use temperature range, cure cycle, coefficient of thermal expansion, working life, shelf life, and VOC content.

CHO-CELL Shielded Vents: High-performance shielded honeycomb air vents designed for high-frequency environments, providing over 90 dB attenuation between 200 MHz and 10 GHz. Specifications include honeycomb foil, frame material, mounting gasket, and customizable sizes.

Ordering Information: Contact information for Chomerics' headquarters and regional offices is provided, along with the ordering procedure for CHO-CELL panels, which are made to customer specifications.