The ValueBond PX (Polyester) cartridges are polyester thermally bonded filters manufactured with no resins, binders, or adhesives. Their multi-depth layer construction makes them ideal for high dirt-holding and long service life within many process fluid applications. Benefits • Rigid polyester core • Thermally bonded melt blown fiber matrix provides dimensionally stable construction • Multi-depth layer structure delivers high-dirt-holding capacity • Design is optimized to provide high-flow rates, low AP, and reduced operating costs • Polyester construction provides broad chemical compatibility for a variety of process applications • Polyester material is FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21 • Chemical Processing • Paints & Coatings • Plating Solutions • Organic Solvents

VALUEBOND PX FILTER CARTRIDGE Filter: Melt blown micro-denier polyester fiber Center Support Core: Polyester Maximum Recommended Operating Conditions Forward Pressure: 68°F | 20°C @ 60 psi Temperature: 250°F | 120°C Inner Diameter: 1.10 in. / 28mm Outer Diameter: 2.48 in. / 63mm Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipose. Ordering Information Micron Rating Nominal Length CODE DESCRIPTION Parker Hannifin Corporation Bioscience & Water Filtration Division DS_IND_ValueBond-PX_2025 [Rev. A] © 2025 Parker Hannifin Corporation...