The ValueBond N (Nylon) melt blown depth filter cartridges are designed for high temperature applications where polypropylene filters cannot be used. ValueBond N features include an integral molded center core and a full range of thermal welded end caps to ensure maximum compatibility with existing installations. Available in nominal ratings of 1,5, 10, 25, 50, 75, and 100 micron. Benefits • Micro-denier melt-blown Nylon fiber, high removal ratings and low pressure drop • Filtration ratings from1 to 100 micron • Graded density structure for maximum dirt holding capacity • Excellent chemical compatibility with solvents, hydrocarbons & aromatics • High void volume, resulting in low differential pressure and excellent dirt-holding capacity • No resins, binders or anti static agents to ensure minimal extractable • Formed by thermal bond without use of any binders and adhesives • Nylon material is FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21 • Chemical Processing • Organic Solvents

VALUEBOND N FILTER CARTRIDGE Filter: Melt blown micro-denier nylon fiber Center Support Core: NylonMaximum Recommended Operating ConditionsForward Pressure with Nylon Inner Core* 250°F | 120°C @ .7 psi 176°F | 80°C @ 14 psi 68°F | 20°C @ 60 psi Dimensions Inner Diameter: 1.10 in. / 28mm Outer Diameter: 2.48 in. / 63mm 1 micron 5 micron 10 micron 25 micron 50 micron 75 micron 100 micron Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipose. Initial Filtration Efficiency Ordering Information Nominal Length CODE DESCRIPTION Parker...