Parker's MegaBond Absolute (MBA) are absolute-rated melt blown cartridges. Using a new innovative manufacturing process, the MBA has higher dirt-holding capacities offering long service life without contaminant migration. The MBA has a fixed core inner structure of thermally bonded continuous microfine polypropylene fibers. The modified outer layer fixed pore structure maximizes the graded density surface area to enhance dirt-holding capacity. Benefits • Microfine, thermally bonded fiber construction with polypropylene core provides superior filtration & eliminates need for circulation to achieve product clarity • Non-fiber-releasing, continuous fiber matrix prevents media migration & ensures consistent production yields and overall quality filtration performance • No surfactants or binders to interrupt product quality or cause foaming • DOE cartridges have polyolefin gaskets thermally bonded to both ends eliminating fluid bypass between the cartridge & vessel seal • Superior inter-layer bonding eliminates contaminant unloading and channeling • Unique outer graded density structure increases dirt-holding capacity • Polypropylene fiber provides broad chemical compatibility for a variety of applications • FDA grade polypropylene (DOE only) designed to conform to • All materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21 • Pore size differentiation is achieved using fibers of differing diameters and maintaining uniform density throughout the cartridge • Pore sizes do not change as DP increases during service, providing consistent particle retention • Fits a majority of Parker and competitor manufactured housings Applications • Photographics • Chemical Processing • High Technology Coatings • Membrane Prefiltration • DI Water • Food & Beverage • Plating Solutions

Polypropylene: Microfiber 100% melt blown construction Center Support Core/End Caps: Natural polypropylene Flow Rate: 5 gpm (18.9 lpm) per 10 inch length Maximum Operating Temp.: 167°F (75°C) Dimensions: 1.1 in. ID x 2.5 in. OD 10, 20, 30 and 40 in continuous nominal lengths Thermally Bonded Gaskets: Polyolefin closed cell foam (DOE only) Dimensions 1- 1/i6 in. ID x 2- 7/i6 in OD (max) 10, 20, 30, and 40 in. continuous nominal lengths. 0.5 micron 1 micron 3 micron 10 micron 20 micron 30 micron Ordering Information Micron Rating Nominal Length Seal Material CODE INCHES CODE DESCRIPTION Std. open...