Housings - Fulflo HT Filter Vessels

Product catalog summary

Overview: The Fulflo® HT filter vessels are engineered for filtering high-temperature heat transfer oils and other hot fluids. These vessels adhere to ASME code standards and are compatible with both double open end (DOE) and single open end (SOE) cartridges in various lengths.

Benefits:

ANSI blind flange closure ensures a positive seal with a common replacement gasket size.
High-temperature 304 SS spiral wound closure gasket with non-asbestos filler for elevated temperatures and fire-safe applications.
Exterior protection through modified silicone paint applied over a sandblasted surface.
Nickel-plated bolting for corrosion resistance at high temperatures.
Cartridge seats and guides made of 316 SS for enhanced corrosion resistance.
Extended inlet and outlet nozzles for protective insulation installation.

Applications: Suitable for heat transfer oils, high-temperature oils, hot fluids, and gases. The design ensures minimal pressure drop and visibility of design information post-insulation.

Specifications:

Design pressure: 123 PSIG at 650°F and 418 PSIG at 650°F.
Dual-purpose cartridge seat for DOE and 2-222 O-ring SOE cartridges.
Conforms to ASME Boiler and Pressure Vessel Code with U or UM stamp.

Ordering Information: Models are available in different configurations based on cartridge length and flow rate. The vessels are constructed from carbon steel, with maximum operating pressures of 123 psi (8.48 bar) and 418 psi (28.2 bar) at a maximum temperature of 650°F (343°C).

Catalog excerpts

Fulflo® HT Filter Vessels Filter Heat Transfer Oils and Other High Temperature Flu- ids with Fulfo HT Series ASME Code Vessels Fulflo® HT multi-cartridge filter vessels are specifically designed for filtration of high temperature heat transfer oils and other hot fluids. All details of design, vessel series conform to ASME code. The HT series vessels are designed for use with double open end (DOE) and single open end (SOE) cartridges in • ANSI blind flange closure for posi- tive seal and common replacement gasket size • High temperature 304 SS spiral wound closure gasket with non- asbestos filler for use at elevated temperature and when fire safe non O-ring design is required • Modified silicone paint, suitable for high temperature, applied over sandblasted surface for exterior • Nickel plated bolting for corrosion resistance at high temperature • Cartridge top seats, guides and bottom seats made of 316 SS for corrosion resistance • Inlet and outlet nozzles extended 6 inches to allow for installation of protective insulation Extended nameplate so design information is visible after protective insulation is installed Designed for minimum pressure drop Designed and fabricated in accor- dance with ASME Boiler and Pressure Vessel code, U or UM Dual purpose cartridge seat for use with double open end and 2-222 O-ring single open end cartridges • Heat Transfer Oils • High Temperature Oils ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Fulflo® HT Filter Vessels Number* Shipping Length of Flowt Dimensions (in) Weight (lbs) Maximum Maximum Material of Operating Operating Construction Pressure Temperature Code Ordering Information Design Series High Temperature Cartridge Length Flange Size Code Stamp Specifications are subject to change without notification. © 2007 Parker Hannafin Process Advanced Filtration Inc. ENGINEERING YOUR SUCCESS.

Open the catalog to page 2