Housings - Fulflo FP Filter Vessels Multi-Cartridge

Product catalog summary

Overview: The Fulflo® FP Filter Vessels are designed for economical liquid filtration, compatible with Fulflo® Flo-Pac® 718 and 736 Pleated Filter Cartridge Series.

Benefits:

Single o-ring design for quick and secure cover sealing.
Swing bolts with eyenuts for easy cover operation.
Maximum design pressure of 150 psi (10.3 bar) at 450°F (232°C) and 200 psig at 100°F (38°C) plus full vacuum.
Standard Buna-n o-ring with optional EPR, Viton, and fluoropolymer materials.
ASME code UM stamp standard, U stamp optional.
Threaded vent and drain connections.
Adjustable leg height.
Threaded or flanged inlet and outlet options.
Side inlet, bottom outlet, and crevice-free welded design for easy cleaning.

Applications: Suitable for process water, coatings, lubricants, coolants, cutting oils, solvents, and EDM.

Specifications: Specifications are subject to change. Viton is a registered trademark of E.I. duPont de Nemours & Co., Inc.

Ordering Information:

Model FP1-1-2: 1 cartridge, 18 inches, 50 gpm, dimensions 42.56 x 12.25 x 35.13 inches, 112 lbs, 5.5 gallons.
Model FP1-1-2F: 1 cartridge, 18 inches, 50 gpm, dimensions 42.56 x 14.50 x 35.13 inches, 120 lbs, 5.5 gallons.
Model FP1-2-2: 2 cartridges, 18 inches, 100 gpm, dimensions 60.56 x 12.25 x 53.13 inches, 132 lbs, 9.6 gallons.
Model FP1-2-2F: 2 cartridges, 18 inches, 100 gpm, dimensions 60.56 x 14.50 x 53.13 inches, 140 lbs, 9.6 gallons.
Model FP1-2-3F: 2 cartridges, 18 inches, 100 gpm, dimensions 60.56 x 14.50 x 53.13 inches, 150 lbs, 9.6 gallons.

Note: Actual flow rate depends on fluid viscosity, micron rating, contaminant, and media type. Consult flow charts for each application.

Material Options: Carbon Steel or 304L Stainless Steel.

Temperature Limitations: Operating temperature limited to 250°C (121°F) by standard Buna-n o-ring and exterior paint on carbon steel models. Optional o-ring materials available.

Catalog excerpts

Housings - Fulflo FP Filter Vessels Multi-Cartridge-1

Fulflo® FP Filter Vessels Fulflo® FP Model Cartridge Filter Vessels Designed for Economical Liquid Filtration The FP Filter Vessel Series is designed for use with the Fulflo® Flo-Pac® 718 and 736 Pleated Filter Cartridge Series. • Single O-ring design closure assures quick, positive cover sealing. • Swing bolts with eyenuts for fast, easy opening and closing of cover • Maximum design pressure is 150 full vacuum • Buna-N O-ring standard with EPR, Viton** and fluoropolymer available • ASME Code UM stamp is standard Threaded vent and drain connections Threaded or flanged inlet and outlet Side inlet, bottom outlet and crevice- free welded design provide a smooth interior for easy wash-out • Process Water • Cutting Oils ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Housings - Fulflo FP Filter Vessels Multi-Cartridge-2

Fulflo® FP Filter Vessels Design Specifications (F) NPS - ANSI Class 150# Slip-On Flanges (F) NPT - ANSI Class 300# Threaded Couplings TActual rate is dependent on fluid viscosity, micron rating, contaminant and media type. Consult flow charts for each application. * Operating temperature limited to 250°C (121°F) by standard Buna-N O-Ring and exterior paint on carbon steel models. Optional O-Ring materials are available. Ordering Information Stainless Steel Specifications are subject to change without notification. ** Viton is a registered trademark of E.I. DuPontde Nemours & Co., Inc. Process...

Open the catalog to page 2