Fulfo Flo-Pac+ Filter Cartridges

Product catalog summary

Overview: The document provides detailed specifications and applications for Parker Fulflo® Flo-Pac®+ filter cartridges, designed for industrial filtration needs, particularly in organic solvent filtration.

Specifications:

Filter Media: Phenolic impregnated cellulose.
Core, End Caps, Sleeve: Electro-tin-plated (ETP) steel.
Adhesive: Epoxy.
End Seals: Available in Vellumoid, Viton*, and Cork.
Operating Temperature: Up to 250°F (121°C).
Change Out ΔP: 35 psi (2.4 bar).
Differential Pressure: 70 psi (4.8 bar).

Applications: Suitable for filtering aromatic hydrocarbons, ketones, ethers, amines, glycols, aliphatic hydrocarbons, halogenated hydrocarbons, and esters.

Benefits:

Epoxy bonding provides resistance to organic solvents.
High flow capacity with low pressure drop due to premium pleated cellulosic media.
Available in various sizes and configurations.
Phenolic resin provides strength and high contaminant capacity.

Filtration Ratings: Available in pore sizes of 0.5µm, 1µm, 5µm, 10µm, 20µm, 30µm, and 60µm with 95% removal efficiency (β = 20).

Ordering Information: Cartridges are available in different series (300, 600, 700) with varying dimensions and packaging options. Flow rates and pressure drop formulas are provided for calculating performance based on viscosity and cartridge length.

Key Parameters:

Recommended pH range: 4-10.
Spiral core withstands pressure surges up to 100 psid.
Flow rate per single length cartridge varies by series, with maximums of 50 gpm for certain configurations.

Notes: Specifications are subject to change without notification. Viton is a registered trademark of E.I. duPont de Nemours & Co., Inc.

Catalog excerpts

Fulflo® Flo-Pac®+ Filter Cartridges Organic Solvent Filtration Parker Fulflo® Flo-Pac®+ Cartridges are the filters of choice for many industrial filtration requirements. Flo-Pac+ Pleated Cartridges are manufactured with premium grade, phenolic impregnated cellulosic filter media for long service life, high flow rate and low pressure drop. Unique epoxy resin bonding of end caps, pleat side seal and gaskets provides excellent resistance to most organic solvents. Flo-Pac+ Pleated Cartridges are available and 60um pore sizes (95% removal; • Epoxy bonding of end caps, pleat side seal and gaskets provides resistance to most organic solvents • Premium pleated cellulosic media allow high flow capacity at low pressure drop • Available in a variety of sizes and configurations to fit most industrial • Impregnated phenolic resin provides strength, integrity and high contaminant capacity • Suitable for operating temperatures • Perforated outer metal sleeve protects the media against damage. • ETP (Electro-tin-plated) steel metal oil-based applications • Gaskets provide positive seals and are available in Viton,* cork and standard Vellumoid Please call for specific • Spiral core withstands pressure • Aromatic Hydrocarbons (toluene, xylene, • Ketones (acetone, isophorone, methylethyl ketone) • Glycols (ethyl acetate, cellosolve acetate) • Aliphatic Hydrocarbons (hexane, pentane, naphtha) • Halogenated Hydrocarbons (methylene chloride, perchloroethylene) ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Fuif lo® Fio-Pac® + Filter Cartridges Filter Media: phenolic impregnated Adhesive: epoxy End Seals: Vellumoid (standard), Viton,* cork Maximum Recommended Operating Flow Rate per Single Length Cartridge: Filtration Ratings: Flow Rate and Pressure Drop Formulas Flow Rate (gpm) = Clean AP x Length Factor Viscosity x Flow Factor Clean AP = Flow Rate x Viscosity x Flow Factor Length Factor 1. Clean AP is PSI differential at start. 2. Viscosity is centistokes. Use Conversion Tables 3. Flow Factor is AP/GPM at 1 cks for 10 in 4. Length Factors convert flow or AP from 10 in (single length) to required...

Open the catalog to page 2