Catalogs >
Parker bioscience and water filtration division >
Fulflo ProBond Filter Cartridges

Fulflo ProBond Filter Cartridges
2Pages

Catalog excerpts

Fulflo® ProBond™ Filter Cartridges Patented Break-Through in Resin-Bonded Cartridge Design Parker ProBond™ cartridges have a unique, proprietary two-stage filtration design to maximize particle retention and service life in viscous fluid filtra- tion applications. An outer, spiral, prefilter wrap, made from a fiPer Plend of polyester and acrylic, increases car- tridge strength and eliminates residual dePris associated with conventional or machined and grooved, resin Ponded ProBond filter cartridges are availaPle in eight differentiated removal ratings of 125um and 150um pore sizes to meet a wide range of performance require- Contact Information Parker-Hannifin Corporation domnick hunter Process Filtration - North America • Outer, spiral wrap collects large while inner layers control particle removal at rated size • Outer wrap increases surface area, & eliminates loose debris and con- tamination caused by machined • Extra-long acrylic fibers provide added strength, resist breakage and migration common with com- petitive "short fiber" cartridges • Available with optimal single- open-end seals (222 o-ring with • Phenolic resin impregnation strengthens cartridge for use with high viscosity fluid • Withstands pressure surges up to 150psid across cartridge (depend- • One-piece construction eliminates bypass concerns with multi-length cartridges and eases change out • Silicone-free construction ensures no contamination to adversely affect adhesion properties of coatings • Printing Inks • Chemical Coatings • Organic Solvents • Petroleum Products S^JTi ~ hunter ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Fulflo® ProBond™ Filter Cartridges 1st stage Pre-filter wrap: • Polyester/Acrylic long staple fiber blend 2nd stage Final Filter wrap: • Acrylic long staple fiber • Fibers impregnated with Phenolic Coreless, one-piece, rigid resin bonded fibrous matrix Maximum Recommended Operating Conditions: • Flow Rate: 5gpm per 10 in length • Maximum Recommended • Recommended Maximum Differential Pressure: Cartridge Pressure Resistance Particle Removal Ratings: Classified as a nonhazardous material • Certified silicone-free • Suitable for weak acids and • Unsuitable for oxidizing agents • None on double...

Open the catalog to page 2