Fulflo Poly-Mate Plus Filter Cartridges

Product catalog summary

Contact Information: Parker-Hannifin Corporation, domnick hunter Process Filtration - North America, located at 2340 Eastman Avenue, Oxnard, California, USA 93030. Toll-free contact: +1 877 784 2234, Phone: +1 805 604 3400, Fax: +1 805 604 3401, Email: [email protected], Website: www.parker.com/processfiltration.

Product Overview: The Fulfl o® Poly-Mate™ Plus Filter Cartridges are high-efficiency, all-polypropylene pleated cartridges designed for high purity filtration. They serve as an ideal membrane pre-filter or cost-effective alternative to membrane cartridges across various applications.

Specifications: Available pore sizes range from 0.25μm to 100μm with a nominal rating at 90%. The cartridges are constructed entirely from polypropylene, ensuring broad performance capabilities and compliance with FDA standards for potable and edible liquid contact.

Benefits: The cartridges offer high surface area for superior flow rates and extended service life, fixed pore construction for ultimate particle retention, and are non-fiber releasing. They are suitable for applications such as DI water, process water, magnetic media, plating chemicals, and as membrane pre-filters.

Biological Safety/Product Purity: The cartridges meet USP Class VI requirements for plastics and are non-photosensitive. All components are FDA listed per CFR, Title 21.

Operating Conditions: Maximum recommended temperature is 200°F (93°C), with a change-out differential pressure of 35psi (2.4bar). Flow rate is 10gpm (38 lpm) per 10-inch length.

Ordering Information: Cartridges are available in various lengths and configurations, with options for different seal materials and end cap configurations. Special options include bubble-point testing and DI water rinse.

Flow Rate and Pressure Drop Formulas: Formulas provided for calculating flow rate and clean differential pressure, with notes on viscosity and flow factors.

Materials of Construction: Filter media is made from melt-blown polypropylene microfiber, with support layers of non-woven or mesh polypropylene, and a heavy wall high-strength polypropylene core.

Flow and Length Factors: Detailed flow factors and length factors are provided for different micron ratings and cartridge lengths.

Catalog excerpts

Fulflo Poly-Mate Plus Filter Cartridges-1

Fulflo® Poly-Mate™ Plus Filter Cartridges High surface area and high efficiency all-polypropylene pleated cartridges Fulflo® Poly-Mate™ Plus Cartridges, made of pleated polypropylene mlcro- fiber, provide high efficiency and high purity filtration. The high efficiency of the Poly-Mate Plus line makes It an ideal membrane pre-fllter or cost- effective alternative to membrane car- tridges in a wide range of applications. Poly-Mate Plus Pleated Cartridges are available In the following pore sizes Parker-Hannifin Corporation domnick hunter Process Filtration - North America Contact Information Benefits construction meet a broad range One-piece integral construction cartridge integrity High surface area design provides superior flow rates and extended service life potable and edible liquid contact Fixed pore construction provides ultimate particle retention Major end seal options are avail- able to fit most standard vessels Poly-Mate™ Plus cartridges are non-fiber releasing and ensure consistent quality filtration • Process Water • Magnetic Media • Plating Chemicals • Membrane Pre-filter ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Fulflo Poly-Mate Plus Filter Cartridges-2

Fulflo® Poly-Mate™ Plus Filter Cartridges Filter Media • Melt blown polypropylene microfiber Media Support Layers • Non-woven or mesh polypropylene • Heavy wall high strength polypropylene Media Support Cage and Thermally • Molded polypropylene Seal Materials • Buna-N, EPR, Silicone, Viton®, PFA Encapsulated Viton® Cartridge Outside Diameter: Cartridge Inside Diameter: Maximum Recommended Operating Conditions: Biological Safety/Product Purity: • Meets USP Class VI requirements for • Non-fiber releasing per FDA Part 210.3B Filtration Ratings: and 100 micrometer pore sizes Performing Attributes...

Open the catalog to page 2