Fluoroflow-HSA Filter Cartridge

Product catalog summary

Contact Information
Parker-Hannifin Corporation, domnick hunter Process Filtration - N.A., 2340 Eastman Avenue, Oxnard, California, USA 93030. Toll-free: +1 877 784 2234, Phone: +1 805 604 3400, Fax: +1 805 604 3401, Email: [email protected], Website: www.parker.com/processfiltration

Product Overview
The Fluoroflow®-HSA is an all-fluoropolymer cartridge designed for aggressive applications, offering increased performance with enhanced pleating for over 40% more surface area compared to standard models. It supports high flow rates and extended filter life, suitable for temperatures up to 180°C. Available in wet-packed and Ultraclean wet-packed options for quick installation and minimal metal extractables.

Benefits

Increased filtration area for longer life
Higher flow rates for enhanced bath turnover
Wet-pack option for quick installation
Ultraclean wet-pack for absolute cleanliness
All-fluoropolymer construction for maximum chemical resistance
100% integrity tested for consistent quality

Applications

Wet etch and clean processes involving acids like phosphoric, sulfuric, hydrofluoric, nitric, and others
High temperature or ozonated processes

Specifications

Materials: 100% Fluoropolymer, thermally bonded components
Effective Filtration Area: 4.8ft² (4" cartridge), 9.8ft² (10" cartridge)
Metals Extractables: Standard <20ppb, Ultraclean <5ppb
Maximum Differential Pressure/Temperature: Varies by temperature and pressure, with specific limits for forward and reverse flow
Cleanliness: Wet-packed <2 particles/ml >0.2μm after 7gal @ 1gpm
TOC/Resistivity Rinse-up: TOC recovery within 3-5ppb, Resistivity recovery within 0.4megohm-cm

Ordering Information
Cartridges are identified by product number, pore size, and lot number. Options include end fitting types, temperature ratings, treatment types, nominal lengths, filter ratings, and O-ring materials.

Performance Attributes
Typical water flow rates per 10" cartridge vary by micron rating, with specific gpm/psid and lpm/100mbar values provided.

Catalog excerpts

Increased performance all-fluoropolymer cartridge for aggressive applications The Fluoroflow®-HSA filter cartridge provides good flow rates and on-stream life. The enhanced pleating provides more than 40% more surface area than our standard Fluoroflow®. This results in increased bath turnover and longer filter lifetime demanded by today's fabs. The all- fluoropolymer construction provides excellent chemical resistance for the most aggressive applications up quick installation or Ultraclean wet- packed which offers the lowest metals Parker-Hannifin Corporation domnick hunter Contact Information Benefits Increased filtration area for longer life Higher flow rates for increased bath turn over Wet-pack option for quick Ultraclean wet-pack option for absolute cleanliness All-fluoropolymer for most maximum chemical resistance consistent quality - Phosphoric acid - Sulfuric acid - Hydrofluoric acid - Nitric acid - NMP-based solvents Other high temperature or ozonated ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

All components are thermally bonded to ensure integrity and reduce extractables. Effective Filtration Area Metals Extractables* Maximum Differential Cleanliness (particle shedding) TOC/Resistivity Rinse-up (wet-packed) TOC recovery within 3-5ppb of feed without additional rinse-up. Resistivity recovery within 0.4megohm-cm Performance Attributes Water Flow Rate (Ipm) Water Flow Rate (gpm) Ordering Information Each cartridge is identified with a product number, pore size and lot number for traceability. *High Temperature is available Specifications are subject to change without notification. For...

Open the catalog to page 2