Fluorocap-Select Filter Capsules

Product catalog summary

Contact Information
Parker-Hannifin Corporation, domnick hunter Process Filtration - N.A., 2340 Eastman Avenue, Oxnard, California, USA 93030. Toll-free: +1 877 784 2234, Phone: +1 805 604 3400, Fax: +1 805 604 3401, Email: [email protected], Website: www.parker.com/processfiltration

Product Overview
The Fluorocap®-Select is a high-performance all-fluoropolymer capsule designed for aggressive applications. It features unique SELECT pleating for increased filtration area and flow, resulting in longer filter life and higher bath turnover. The construction offers excellent chemical resistance up to 180°C and is available in wet-packed or Ultraclean wet-packed options for quick installation and minimal metal extractables.

Benefits

Large filtration area for extended life
High flow rates for maximum bath turnover
Wet-pack option for quick installation
Ultraclean option for absolute cleanliness
All-fluoropolymer construction for maximum chemical resistance
100% integrity tested for consistent quality

Applications

Wet etch and clean processes including hot phosphoric acid, sulfuric acid, hydrofluoric acid, nitric acid, Piranha, SC1, SC2, and NMP-based solvents
Other high-temperature or ozonated processes

Specifications

Materials: 100% Fluoropolymer, thermally bonded components
Effective Filtration Area: 12.2 ft² (1.1m²) per 10" for 0.03 & 0.05μm, 11.4 ft² (1.0m²) for other ratings
Metals Extractables: Standard <20ppb, Ultraclean <5ppb in 10% HNO3 extraction
Maximum Differential Pressure/Temperature: Varies by temperature and option, up to 100psid (6.8bar) @ 75°F (24°C)

Ordering Information
Each capsule is identified with a product number, pore size, and lot number for traceability. Various options are available for style, temperature, treatment, element length, filter rating, vent alignment, and connections.

Performance Attributes
Typical water flow rates vary by micron size, with detailed specifications provided for in-line Fluorocaps with ¾" Parflare in-line fittings.

Catalog excerpts

High performance all-fluoropolymer capsule for the most aggressive applications encapsulated filter cartridge provides exceptional flow rates and on-stream life. It utilizes our unique SELECT pleating that increases filtration area and flow by over 25% compared to our standard Fluorocap®. This results in increased bath turnover and longer filter lifetime demanded by today's fabs. The all-fluoropolymer construction provides excellent chemical resistance for the most Its integral filter design maximizes up-time with safe and simple change- outs. Available wet-packed for quick installation or Ultraclean wet-packed which offers the lowest metals Parker-Hannifin Corporation domnick hunter Contact Information Benefits Large filtration area for longer life High flow rates for maximum bath turn over Wet-pack option for quick Ultraclean option for absolute chemical resistance consistent quality - Sulfuric acid - Hydrofluoric acid - Nitric acid - NMP-based solvents Other high temperature or ozonated ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

All components are thermally bonded to ensure integrity and reduce extractables. Effective Filtration Area Metals Extractables* Cleanliness (particle shedding) Wet-packed: 2 particles/ml >0.2um after TOC/Resistivity Rinse-up (wet-packed) TOC recovery within 3-5ppb of feed after Resistivity recovery within 0.4megohm-cm Performance Attributes Flow Direction Options Maximum Differential Ordering Information Each capsule is identified with a product number, pore size and lot number for traceability. Water Flow Rate (Ipm) *Flow rates are for in-line Fluorocaps with W Parflare in-line fittings. Water...

Open the catalog to page 2