High-performance hydrophilic PES membrane cartridges for aqueous applications applications such as DI water and exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates. The innovative SELECT pleating provides increased performance over competitive cartridges. Membrane area is increased by over 50% while flows are 40% higher within the same footprint. The result is one of the longest lasting cartridges on the market. polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure Dl water, certified facility. Contact Information Benefits Parker-Hannifin Corporation domnick hunter High-retention hydrophilic Unique SELECT pleating technology High flow rates for increased bath Broad chemical compatibility for multiple applications Wide range of configurations and Reduced overall cost of filtration Bulk DI water systems Copper plating Hard disk wash processes Other dilute acids and bases ENGINEERING YOUR SUCCESS.

Clariflow®-E Select Membrane: Polyethersulfone Support Layers: Polypropylene Structure: Polypropylene All components are thermally bonded to ensure integrity and minimize extractables. Effective Filtration Area other pore sizes per 10" Maximum Differential Cleanliness (particle shedding) Data as from open bag and Installed, no additional installation flushing. Resistivity Rinse-up Resistivity rinse-up to background minus 0.2megohm-cm of feed after Performance Attributes Water Flow Rate (Ipm) Water Flow Rate (gpm) Ordering Information Each cartridge is identified with a product number, pore size...