Chemflow-PE Filter Cartridges

Product catalog summary

Contact Information
Parker-Hannifin Corporation, domnick hunter Process Filtration - N.A., 2340 Eastman Avenue, Oxnard, California, USA 93030. Toll-free: +1 877 784 2234, Phone: +1 805 604 3400, Fax: +1 805 604 3401, Email: [email protected], Website: www.parker.com/processfiltration

Product Overview
The Chemflow®-PE filter cartridge is designed for chemically-resistant applications, particularly in bulk chemical delivery and lower temperature processes (<60°C). It features a PTFE membrane with HDPE supports, offering an economical alternative to all-fluoropolymer cartridges. The filter is available in dry or wet-packed forms for quick installation.

Benefits

Good flow rates and long lifetime
Wet-pack option for quick installation
PTFE/HDPE construction for chemical resistance
100% integrity tested in a cleanroom environment

Applications

Bulk chemical delivery including acids, bases, solvents, and photochemicals
Wet etch and clean processes (<60°C)
Specific chemicals: Phosphoric acid, Hydrofluoric acid, Nitric acid, SC1, SC2, Solvents

Specifications

Materials of Construction: Membrane: PTFE, Support Layers: HDPE, Structure: HDPE
Effective Filtration Area: 8.3ft² (0.78m²) per 10˝ (250mm) cartridge
Metals Extractables: Standard: <55ppb (total) in a 10% HNO3 extraction
Maximum Differential Pressure/Temperature: Forward: 80psid (5.5bar) @ 75ºF (24ºC), Reverse: 50psid (3.4bar) @ 75ºF (24ºC)
Maximum Operating Temperature: 140ºF (60ºC)
Cleanliness (particle shedding): Wet-packed: <1 particles/ml >0.2μm after 5gal at 1gpm
TOC/Resistivity Rinse-up (wet-packed): TOC rinse-up to background plus 5ppb of feed after 70gal @ 1gpm, Resistivity rinse-up to background minus 0.2 megohm-cm of feed after 60gal @ 1gpm

Ordering Information

Each cartridge is identified with a product number, pore size, and lot number for traceability.
End Fitting Options: 226 | Flat, 222 | Flat, 226 | Fin, 222 | Fin
Styles: None (Standard), ½˝ Shortened on 222 Fitting
Treatment Options: Standard, Wet Packed
Nominal Lengths: 10˝ (250mm), 20˝ (500mm), 30˝ (750mm), 40˝ (1000mm)
Filter Ratings: 0.05, 0.1, 0.2, 1.0 microns
O-Ring Materials: Buna-N, EPDM, Silicone, Viton®, FEP-Encapsulated Viton®

Performance Attributes

Water Flow Rates, Typical: 0.05 micron: 0.8 gpm/psid, 0.1 micron: 2.1 gpm/psid, 0.2 micron: 3.8 gpm/psid, 1.0 micron: 10 gpm/psid

Catalog excerpts

Chemically-resistant cartridge for bulk and lower temperature applications The Chemflow®-PE filter cartridge uses a PTFE membrane along with HDPE supports that provide fluoropolymer cartridges. It provides a high degree of retention and cleanliness along with good flow and lifetime. This filter is ideally suited for bulk chemical delivery and lower quick installation. Contact Information Benefits Parker-Hannifin Corporation domnick hunter Good flow rates Long lifetime Wet-pack option for quick PTFE/ HDPE construction for chemical resistance 100% integrity tested in cleanroom Bulk chemical delivery - Acids, bases, solvents, - Phosphoric acid - Hydrofluoric acid - Nitric acid ENGINEERING YOUR SUCCESS.

Open the catalog to page 1

Membrane: PTFE Support Layers: HDPE Structure: HDPE All components are thermally bonded to ensure integrity and reduce extractables. Effective Filtration Area Metals Extractables* Maximum Differential Pressure/ Maximum Operating Temperature Cleanliness (particle shedding) Wet-packed: <1 particles/ml >0.2um after Data is from open bag and installed, no additional Installation flushing. TOC/Resistivity Rinse-up (wet-packed) TOC rinse-up to background plus 5ppb of Resistivity rinse-up to background minus 0.2 megohm-cm of feed after 60gal @ 1gpm. Performance Attributes Water Flow Rate (Ipm) Water...

Open the catalog to page 2