ACCUTRIM®
2Pages

Book Trimmer FEATURES • Fast, easy set-up • Touch screen control • Programable • Bi-directional cutting action • Excellent repeatability • Infrared safety beams • 110 volts/ 60 cycle (standard) • One operator • Minimum floor space Features / Benefits: • Outstanding Accuracy (Straight, square, clean cuts) • Special clamping for “Nailhead” - No crushing of the spine on the infeed and knife clamps • Excellent Repeatability • SAFETY (light barrier in-feed area) • 110 volt/ 20 amp/ 60 Hz (standard) • Easy Maintenance • No outside air requirements • Connection to house air if required • Scrap chute Cutting Modes: • Papercutter: One cut, larger capacity (4.25 X 11.75) • Cover pocket: Two cuts, head and face • Normal: Three cuts, head, foot, and face Diagnostics: • Device check screen • On-screen error messages • Manual operation of all functions Machine History: • Total cycle count • Running job count Maintenance: • On-screen signal for maintenance, based on cycle count Auto Cycle: • Cutting cycles start based on timer settings, or footpedal operation Door Safety Override: • Help during adjustment and trouble shooting procedures (in manual mode only) For more information about the On Demand Book Trimmer: 1.800.932.0780 or visit papercutters.com/Booktrimmer ©2018 C

Book Trimmer Note: Sizes and Specifications are preliminary and for reference only. Cycles per hour: Up to 240 Setup Time (Per Run): Less than 20 seconds Patented Bi-Directional Cut: Eliminates spine tearing (chip-out) and the need to turn books on to top cover for final trim BOOK SPECIFICATIONS Patented Bi-Directional Cutting Process Pile height: Knife Direction Position 1 2nd Cut 2.00” KNIFE Book Trim Sizes: Spine to face SPINE min. Head to foot min. 7.5” Always cuts Head to foot max. Knife Direction Position 2 3rd Cut 2.00” KNIFE Two-up (Optional): Length - minimum 3.0” Length - maximum...