*mydirectindustry

4BIKE

Product catalog summary

Product Overview
The document provides technical specifications and best practices for the 4BIKE product, specifically designed for Formula EWC - Superstock applications. The product code is 04BIKE.00001, featuring a 1/2” square drive and weighing 2.23 kg (4.9 lbs).

Specifications

Dimensions: Length of 161 mm (6.3”).
Air Inlet: 3/8” BSP with a supply hose inside diameter of 13 mm (0.51”).
Pressure: Maximum pressure of 14 bar (200 psi) and operating pressure between 10/14 bar (150/200 psi).
Speed and Torque: Free speed for loosening at 14800 rpm and tightening at 11500 rpm. Maximum torque for loosening is 1025 Nm (756 ft-lbs) and for tightening is 850 Nm (627 ft-lbs).

Available Versions
The document mentions a fast left-hand version (blue) known as 4BIKE LH, which is optimized for loosening nuts tightened clockwise.

Key Features

Equipped with new carbon vanes and additional air exhausts to enhance speed.
Constructed with aeronautical aluminum front cover and built-in FRS.
Utilizes a twin hammer mechanism for efficient operation.

Suggested Couplings & Fittings

Couplings should have a minimal bore of 7.6 mm (19/64”).
Recommended male 3/8” BSP fittings.

Highlights
The 4BIKE is noted for its speed and efficiency, suitable for both rear and front wheel applications, and features a square drive with a spring pin.

Catalog excerpts

4BIKE BEST PRACTICE FORMULA EWC - SUPERSTOCK Product name Product code Square drive Supply hose inside diameter Operating pressure Free Speed - Loosening (14 bar / 200 psi) Free Speed - Tightening (14 bar / 200 psi) SQUARE DRIVE WITH SPRING PIN TWIN HAMMER MECHANISM WEIGHT 2,23 kg (4.9 lbs) MAX TORQUE 1025 Nm (756 ft-lbs) AIR INLET 3/8” BSP • New carbon vanes • Developed for 5 nuts • Additional air exhausts to increase the speed • Less powered on tightening The fast left hand version (blue) loosens nuts tightened clockwise faster AERONAUTICAL ALUMINIUM FRONT COVER 6 NEW CARBON VANES INSIDE Very fast! Wheel gun for both rear and front wheel. SUGGESTED COUPLINGS & FITTINGS • couplings: minimal bore of 7,6 mm (19/64”) • male 3/8” BSP fittings QR CODE WWW.PAOLI.NET | SALES@PAOL

Open the catalog to page 1

All Paoli catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list