Photo-electric Multiplexer IMX-N34 2-channel-multiplexer (manual gain setting) • Light barrier with modulated IR-Light • 2-channel installation system for tight assembly without cross talk • Range up to 50 m (164 ft) • One relay output (normally open) per channel • Sensitivity for each channel adjustable with • • • • • potentiometer Adjustable switch-on and switch-off delay 0 - 10 s Programmable light / dark function System power 20 % / 100 % selectable by bit switch Multiplex-speed 16 ms / 8 ms switchable Transmitter and receiver terminals are short circuit proof Description On the 2-channel multiplexer with manual gain setting from Pantron can work up to two Sensor heads (transmitter and receiver) without the possibility of cross talk. The multipexer has one relay output (normally open contact) with adjustable switch-on / -off delay about 0-10s and a yellow status LED for each channel. Different working conditions can be selected, according to the application, for each channel on the back side of the decive by easy accessible DIPswitches. Consequently, the user is able to change the sensitivity value, which is adjusted to needed range and pollution, for increasing the fine adjustment of the poteniometer or to optimize the object recognition. Ordering Guide Supply voltage Order code Safety Instructions The operation of infrared multiplexer IMX... is not authorized for applications where safety of the person depents on the device function. Pantron Instruments GmbH • Postfach 1129 • D-31158 Bad Salzdetfurth • Tel.: 05063/959