Flexogluer

Product catalog summary

Overview: The document describes the Flexogluing station by PANOTEC s.r.l., designed for gluing American boxes using hot melt glue. This station is part of a package production line and aims to simplify the gluing process, eliminating the need for manual stapling or gluing.

Specifications:

The station includes fixed and adjustable alignment shoulders to facilitate box placement and ensure stability during the gluing process.
It features a Hot Melt console with automatic management of glue length and thermo-regulated tubes for precise glue application.
The station can handle approximately 2.5 packages per minute.

Capabilities:

The adjustable shoulders enable the gluing of packages with dimensions ranging from a minimum of 290x290 mm to a maximum of 1200x800 mm.
It can also glue the top flap of boxes with varying dimensions without using lateral alignment shoulders.
The maximum length of an open box that can be processed is 2450 mm.

Catalog excerpts

FLEXOGLUER - American boxes “Ring” Gluing Gluing station with hot melt glue for American boxes produced by the package production machine of the line. The station performs the gluing of American boxes of large and medium sizes in a simple way, avoiding the manual process of stapling or gluing. The station includes: • lateral fixed alignment shoulders on the operator side and 2 adjustable alignment and holding shoulders, to facilitate the placement and ensure the box holding before performing the gluing process. • Hot Melt console (hot melt glue) with automatic management of the length of the gluing and thermo regulated tubes area for glue application where required by the system • productivity of the gluing station: about 2.5 packages / 1 ' PANOTEC s.r.l. - Sede Legale : Via G.Polese, 2 - 31010 Cimadolmo (TV) Tel. 0422-432715 - fax 0422-432771 - www.panotec.it - [email protected] Codice Fiscale, P.IVA e Reg. Imprese di TV: 02462930260 - Cap. Sociale: 93.600,00 i.v. - REA Numero: 211673

Open the catalog to page 1

the adjustable shoulders allow the "ring" sealing of packages with minimum dimensions of 290x290 and max 1200x800. It is also possible to glue the top flap of boxes with different dimensions without the lateral alignment shoulders. Max length of the open box: 2450 mm. PANOTEC S.r.l. - Sede Legale : Via G.Polese, 2-31010 Cimadolmo (TV) Codice Fiscale, P.IVA e Reg. Imprese di TV: 02462930260 - Cap. Sociale: 93.600,00 i.v. - REA Numero: 211673

Open the catalog to page 2

All Panotec catalogs and technical brochures

Compack 3
7 Pages
Compack
5 Pages
Varypack
5 Pages
Varybox
5 Pages
NextMode
5 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list