Tire Components: Tread Stock Sidewall Calender Stock Tube & Hose Sheets & Mats Rubber Bonded Parts Belting Reliable, non-contact printing on rubber products. The Rubber Printing System (RPS) from Pannier Corporation is the world’s first ink jet printer to successfully use non-contact marking technology to print curable inks on rubber. For the first time, manufacturers of rubber products can benefit from the capability to automatically download and print real-time production information. Product data, internal tracking information and even logos can be printed using the RPS’s revolutionary printhead technology. Choose curable white ink for permanent identification or disappearing ink for marks that disappear when the rubber is cured. The curable, rubber-based inks used in the RPS do not stick or transfer onto molds or vulcanizing equipment. Application of these inks does not affect the adhesion of rubber components to each other or other materials. PRINTING RUBBER PRINTING SYSTEM

PRINT OPTIONS SPECIFICATIONS Ink Types Curable White, Disappearing Electrical Supply 110 VA; 50/60 Hz Character Sizes ¼” to 5¼”, bold characters, adjustable width and spacing Air Supply Print Matrix 5x5; 7x5; 10x10; 16x10 Less than 30 PSI, clean and dry (optional electrical ink supply available with internal air pressure) Lines of Text 1 line/7-dot, 2 lines/16-dot, 4 lines/32-dot Message Length 256 characters per message Operating Environment Temperature: 23°F to 113°F Humidity: 10% - 90% non-condensing Message Storage 100 messages including logos, expandable to 1,000 messages Protection Rating...