FTRBE12
2Pages

PHYSICAL INFRASTRUCTURE SYSTEMS Fiber-Duct ™ Mounting Brackets Part Number Part Description Existing Threaded Rod Bracket for Fiber-Duct ™ System FTRBE12 FTRBE12/FTRBE12M FTRBE58 Used for supporting the 2x2 and 4x4 Fiber-Duct ™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. D. Power over Ethernet C. Fiber Optic Systems New Threaded Rod Bracket for Fiber-Duct ™ System FTRBN12 FTRBN12M FTRBN12/FTRBN12M FTRBN58 Used for supporting the 2x2 and 4x4 Fiber-Duct ™ Systems from new threaded rod installations. Bracket is secured to threaded rod with two nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. Underfloor Pedestal Bracket for Fiber-Duct ™ System FUSB Used to support the 2x2 and 4x4 Fiber-Duct ™ Systems by attaching to underfloor pedestal (not included). Use on pedestals up to 1" in diameter. Bracket contains hardware to attach to pedestal and hardware for mounting channel to bracket. Ladder Rack Bracket for Fiber-Duct ™ System FLRB Used to support the 2x2 and 4x4 Fiber-Duct ™ Systems attaching directly to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. Contains hardware for mounting channel to bracket. “L” Wall Mount Bracket for Fiber-Duct ™ System Used to support 2x2 and 4x4 Fiber-Duct ™ Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket. I. Physical Infrastructure Management J. Overhead & Underfloor Routing FLB L. Cabinets, Racks & Cable Management M. Grounding & Bonding O. Labeling & Identification P. Cable Management Accessories Q. Index Table continued on page J.64 For service and technical support, call 866-405-6654 (outside the U.S. and Canada, s

PHYSICAL INFRASTRUCTURE SYSTEMS Fiber-Duct ™ Mounting Brackets (continued) C. Fiber Optic Systems Part Number D. Power over Ethernet E. Zone Cabling Bracket used to offset 2x2 or 4x4 Fiber-Duct ™ System and hinged duct from the front face of an equipment rack. Bracket provides a secure mounting surface .67" (17mm) from the front of an equipment rack. Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2" – 2" Ladder Rack F2PCLB12 Bracket used to offset Fiber-Duct ™ System from mounting surface, adjustable from 1.5" (38mm) to 4" (101mm). Typically used on the front of an...