FR24TBE12
1Pages

PHYSICAL INFRASTRUCTURE SYSTEMS 24x4 FiberRunner ® Mounting Brackets Part Number C. Fiber Optic Systems Part Description Existing Threaded Rod QuikLock ™ Bracket for 24x4 System FR24TBE12 Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Wyr-Grid ® Mounting Bracket for FiberRunner ® System FR24TBN12 FR24TBN12M FiberRunner ® QuikLock ™ Threaded Rod Trapeze Bracket for Wyr-Grid ® 30" (762mm) width. Used to support FiberRunner ® 4x4, 6x4, 12x4, and 24x4 Channel above or below the Wyr-Grid ® 30" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB30BL bracket. Quick mount clips, FRQMC24-X are not included for installing the 24x4 channel. These must be purchased separately. New Threaded Rod QuikLock ™ Bracket for 24x4 System FR24TBN12 D. Power over Ethernet H. Media Distribution I. Physical Infrastructure Management FiberRunner ® Quick Mount Clips FRTBWG30BL Used whenever a FiberRunner ® 24x4 Channel is installed on the FiberRunner ® Trapeze Bracket, FRTBWG30BL for 30" Wyr-Grid ® Pathway. For use with FiberRunner ® 24x4 Channel only. Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2" – 2" Ladder Rack F2PCLB12 Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded rod (not included). Contains bracket and hardware for attaching bracket to ladder rack. Two-piece framing clip attaches to auxiliary framing bars. Framing clip halves slide into position and interlock on the auxiliary framing bars, allowing easier assembly of the threaded rod to bars. Contains two-piece framing clip and hardware for attaching framing clip to auxiliary framing bars. (5/8" threaded rod not included.) K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding Two Piece Framing Clip for Attaching 5/8" Threaded Rod to 2" x 9/16" C-Channel Auxiliary Framing Bars FRAFC58 J. Overhead & Underfloor Routing O. Labeling & Identification P. Cable Management Accessories For service and technical support, call 866-405-6654 (outside the U.S. and Canada, se