FR12TRBE58
2Pages

PHYSICAL INFRASTRUCTURE SYSTEMS 12x4 FiberRunner ® Mounting Brackets C. Fiber Optic Systems Part Number D. Power over Ethernet E. Zone Cabling Part Description Existing Threaded Rod QuikLock ™ Bracket for 12x4 System FR12TRBE58 FR12TRBE58 FR12TRBE58M Used to support the 12x4 system from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. New Threaded Rod QuikLock ™ Bracket for 12x4 System FR12TRBN58 F. Wireless Underfloor Pedestal QuikLock ™ Bracket for 12x4 System J. Overhead & Underfloor Routing L. Cabinets, Racks & Cable Management Used to support the 12x4 system attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Center Support QuikLock ™ Bracket for 12x4 System FR12CS12 FR12CS58 FR12CS12M FR12CS58M Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Also can be secured directly to the top of cabinets. Top Support Adjustable "C" QuikLock ™ Bracket for 12x4 System FR12ACB12 Used to support the 12x4 system by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 2" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Adjustable Ladder QuikLock ™ Bracket for 12x4 System I. Physical Infrastructure Management Used to support the 12x4 system from new threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Trapeze QuikLock ™ Bracket for 12x4 System O. Labeling & Identification P. Cable Management Accessories Used to support the 12x4 system by spanning two threaded rod drops that are 18" apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps. Q. Index Order number of pieces required, in multiples of Sta

PHYSICAL INFRASTRUCTURE SYSTEMS 12x4 FiberRunner ® Mounting Brackets (continued) Part Number Part Description Adjustable Cabinet QuikLock Bracket for 12x4 System ™ Used to support the 12x4 system, dual 6x4, or dual 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 12" (305mm) allowing runs to be leveled over uneven cabinet heights. Also allows spillouts such as vertical tee to be positioned directly over cable inlets on cabinet tops. Bracket is secured to the cabinet frame with through bolts (not included). The pre-assembled slide clamps enable fast assembly to...