Rotating TIG Filler System General Information The Panasonic Rotating TIG filler system was developed for difficult TIG applications, for which a defined rotation of the filler feeding unit is necessary. With a servo motor connected to the robot controller, the filler feeding unit can easily be rotated, synchronously to the movement of the robot and other external axes. Technical Data Customer benefits Independent through the Teach Box of the robots fully programmable rotating filler feeder unit Maximum rotating angle 240° Applicable wire diameter: steel/stainless steel 1,0 and 1,2 mm aluminium 1,2 mm Applicable electrode diameter: 2,4 and 3,2 mm Wire feeding speed can be adjusted continuously from 0-5,2 m/min with the Teach Box Wire feeding can be adjusted synchronously to the arc pulse Because the filler feeding unit can be rotated with a robot axis it is possible to automate the welding of very difficult work pieces Compared with a fixed (not rotating) filler feeding unit, the working range of the robot dramatically increase High flexibility and easy access to difficult work pieces Jagenbergstr. 11a, 41468 Neuss, Germany Factory Solutions Europe Robot and Welding Systems Europe a department of Panasonic Industrial Devices Sales Europe GmbH Germany Tel. +49 (0) 2131 / 608 99 -0, Fax -200 UK Tel. +44 (0) 1785 / 824 795 E-Mail: [email protected] Web: www.panasonicrobotics.eu © Subject to technical alterations 01.08.2012