Catalogs >
Panasonic Robot & Welding system solutions >
G4 Robot Controller included power source 500A

G4 Robot Controller included power source 500A
1 / 2Pages

Catalog excerpts

G4 Robot Controller included power source 500A - 1

Arc Welding Robot Controller Supporting Factory Optimization Next-Generation Robot Controller Next Generation Robot Controller Supporting Factory Optimization due to Improved motion accuracy, with Touch panel and 3D display and Open interface specifications. Highly accurate and efficient welding experience Precise fine-tuning of the acceleration and deceleration control has increased the maximum speed of the axes by up to 27%. The control algorithm has also been revised to optimize positioning accuracy. These improvements significantly reduce work stoppages that affect productivity in demanding workplaces. Additionally, it also improves product quality and cycle time, which is essential for companies to succeed. Max speed of 6 axes (in contrast with G3)* 127% 120% Average Average of main of all *Example of measurement in our environment Easier operation due to touchscreen and 3D visualization The resolution of the panel display has been increased by a factor of 1.6 and the new touch screen function can also be easily operated with work gloves. The highresolution display also features 3D visualization for the first time. All of this allows the programmer to operate the device much more easily and intuitively. Compatibility and flexibility for networked production The new G4 controller utilizes its high-speed and parallel processing capabilities to offer several additional functions - and with more safety and flexibility. Examples such as the adoption of the OPC UA open communication interface and software-based functional safety. Connection to new safety sensors and devices for data acquisition or automation is facilitated without compatibility or hardware limitations.

Open the catalog to page 1

G4 Robot Controller included power source 500A - 2

Safe housing design The primary input cable and connection cable are arranged at the rear, the TP cable at the front. This prevents tripping hazards at the sides and protects both operators and machines. M-C/built-in external axis cables arranged on the back. Memory capacity Position control method Software servo system Software servo system TP: SD memory card slot x 1 USB 2.0 (Hi-Speed supported) x 2 TP: SD memory card slot x 1 USB 2.0 (Hi-Speed supported) x 2 Simultaneous 6 axes (max. 27 axes) Simultaneous 6 axes (max. 27 axes) Number of control axes Input/output signals Dedicated signal:...

Open the catalog to page 2