OUTLINES Now you can integrate Bluetooth very easily into your final product, with the PAN1320-HCI. If you are searching for a SPP version, please have a look to PAN1311/PAN1321. The PAN1320 is manufactured in a SMD LGA package with shielded case. Total size including antenna is 15,6 x 8,7 x 2.8 mm3. The module is qualified to the Bluetooth 2.1 standard. Due to a very attractive price PAN1320 is well suited for units produced in all quantities, if you are able to integrate an HCI module into your application. This module complies with the national and international regulations, e.g. EMC, Safety, EN300328, FCC and IC. FEATURES General - Complete Bluetooth 2.1 + EDR solution - Ultra low power design - Temperature range from -40°C to 85°C - Integrates ARM7TDMI, RAM and patchable ROM - On-module voltage regulator. External supply 2.7-3.6V - Reference clock included - Low power clock from internal oscillator or external low power clock (e.g. 32.768 kHz) - Dynamic low power mode switching - No external components needed (antenna is included) Interfaces - 3.25 MBaud UART with transport layer detection (HCI UART, HCI Three-Wire UART) - PCM/I2S interface for digital audio - WLAN coexistence interface^'y £ - General purpose I/Os with interrupt capabilities. JTAG for boundary scan and debug Bluetooth - Piconet with seven slaves. Scatternet with two slave roles while still being visible - SCO and eSCO with hardware accelerated audio signal processing - Power control and RSSI. Hold, Park and Sniff. - Adaptive Frequency Hopping, Quality of Service, Channel Quality Driven Data Rate - Bluetooth security features: Authentication, Pairing and Encryption - Bluetooth test mode and Infineon’s active Bluetooth tester mode Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1320 BT2.1 Rev. A2 www.pedeu.panasonic.de [email protected] Hardware Status Mass Production

Dipl.-Ing. Mathias Hopp Product Manager Wireless Connectivity Panasonic Electronic Devices Europe GmbH Zeppelinstrasse 19 21337 Luneburg, Germany - Cable Replacement - Personal Digital Assistants (PDAs) - PC Motherboards & - Peripherals - Scanners - Mono & Stereo Audio Applications APPLICATIONS All Wireless Applications - Printer Adapters - Printers - Access Points - Wireless Sensors - Industrial Applications BLOCK DIAGRAM Voltage Regulator Ceramic Antenna Low Power Clock (Optional) 32.768 kHz TECHNICAL CHARACTERISTICS (1) Figure indicates maximum possible data rate with this packet type www.pedeu.panasonic.de...