Ideas for Wireless Solutions 802.15.4-Modem PAN4580 OUTLINES-ENWC9A31x5EF The PAN4580 module is a long range, low power, 2.4GHz ISM band transceiver which includes a complete 802.15.4 physical layer (PHY). It is designed for the IEEE 802.15.4 wireless standard. Using an appropriate microcontroller (MCU) with reference oscillator provides a cost effective solution for long range data links and networks. The PAN4580 comes pre-loaded with the Synapse SNAP® mesh network operating system. This module will comply to CE and FCC / IC. A pin and function compatible modem, called PAN2580, is also available for the 868MHz and 915MHz range. FEATURES - small size SMD device (29.8mm x 19.0mm x 2.7mm) - 3 antenna options: Single port 50Q, ceramic antenna or plug - 16 selectable Channels with up to 2 Mbps RF raw data rate - Low power modes for increased battery life - High sensitivity: -99dBm typ. @ 250kbps & 1% Packet Error Rate - +3.0 dBm @ 2.4GHz Pout programmable over a 20 dB range - Low supply voltage (1.6 V to 3.6 V, 3.0 V typ.) - Operating temperature range -40°C to +85°C - 128k total Flash with 69.5k used by SNAP core, 58.5k free for uploadable scripts when using SNAP. - 2 UART with HW Flow Control for control or transparent data - 33 GPIOs and up to 8 A/D inputs with 10 Bit ADC for fast and easy conversion from analog inputs -such as temperature, pressure and fluid levels- to digital values. - OQPSK Modulation - Mesh (SNAP®) Meshnetworking Topology with 16 Channels APPLICATIONS - Wireless Sensor Networks, e.g. Lighting Control - Inventory management, Factory- and home automation - Monitoring (environmental, patient or fitness) - Automatic Meter Reading on 2,4 GHz Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. 4580-100-101 Rev. B1 www.pideu.panasonic.de [email protected] Hardware Status Mass Production

Dipl.-Ing. Mathias Hopp Product Manager Wireless Connectivity Corporate Marketing Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 21337 Luneburg, Germany Tel.: +49 (0)4131-899-283 Fax: +49 (o)4131-899-187 [email protected] TECHNICAL CHARACTERISTICS Parameter Notes: All parameters are valid for Vsupply = 3.0V and Tamb = 25°C. Software from Synapse Wireless Inc. will run on this module, to create a wireless mesh network. Also a pin compatible 868/915MHz version with the same Synapse software is available, called PAN2580. www.pideu.panasonic.de [email protected] Hardware...